The economic assessment of non-marketed resources (i.e., cultural heritage) can be developed with stated or revealed preference methods. Travel cost method (TCM) is based on the demand theory and assumes that the demand for a recreational site is inversely related to the travel costs that a certain visitor must face to enjoy it. Its application requires data about the tourist's origin. This work aims to analyze the economic value of the National Museum and Research Center of Altamira, which was created to research, conserve, and broadcast the Cave of Altamira (UNESCO World Heritage Site since 1985). It includes an accurate replica known as the "Neocave". Two different TCM approaches have been applied to obtain the demand curve of the museum, which is a powerful tool that helps to assess past and future investments. It has also provided the annual economic value estimate of the National Museum and Research Center of Altamira, which varies between 4.75 and 8.00 million € per year.

Abstract:Heritage tourism can increase incomes and stimulate the economy in former mining areas. Recreational tourism is one of the main sources of value of heritage. People from urban areas are willing to pay for access to these tourism options. The measurement of the economic impact of this availability is one of the main problems to confront, due to the immeasurable possibilities of heritage resources. The use of non-market values and their estimation by means of revealed preference methods should help to assess the economic value of this sort of resources from a recreational perspective. The travel cost method (TCM) is widely used to value areas with recreational uses, such as lakes, beaches or forests, but there are not references to previous applications of this methodology in the field of mining heritage. In this work, TCM has been applied to obtain the economic value of El Soplao Cave (Geosite UR004, Cantabria, Spain) as a recreational site, providing an estimated result of 34,961,162 euros.

Three-dimensional models are required to virtualize heritage sites. In recent years, different techniques that ease their generation have been consolidated, such as photogrammetry with Unmanned Aerial Vehicles (UAVs). Nonmetric cameras allow relatively inexpensive data collections. Traditional aerial photogrammetry has established methodologies, but there are not commonly used recommendations for the selection of parameters when working with UAV platforms. This research applies the Taguchi Design of Experiments Method, with four parameters (height of flight, forward and lateral overlaps, and inclination angle of the sensor) and three levels (L9 matrix and nine flights), to determine the set that offers the best metric goodness and, therefore, the most faithful model. The Roman civitas of Juliobriga (Cantabria, North of Spain) was selected for this experiment. The optimal flight results of the average signal-to-noise ratio analysis were height of 15 m, forward and lateral overlaps of 80%, and inclination of 0° (nadiral). This research also highlights the noticeable contribution of the inclination in the accuracy of the model with respect to the others, which is 16.4 times higher than that of the less relevant one (height of flight). This leads to propose avoiding inclination angle as a variable, and the sole development of nadiral flights to obtain accurate models.

No abstract

No abstract

The geothermal resource is one of the great sources of energy on the planet. The conventional prospecting of this type of energy is a slow process that requires a great amount of time and significant investments. Nowadays, geophysical techniques have experienced an important evolution due to the irruption of UAVs, which combined with infrared sensors can provide great contributions in this field. The novelty of this technology involves the lack of tested methodologies for their implementation in this type of activities. The research developed is focused on the proposal of a methodology for the exploration of hydrothermal resources in an easy, economic, and rapid way. The combination of photogrammetry techniques with visual and thermal images taken with UAVs allows the generation of temperature maps or thermal orthomosaics, which analyzed with GIS tools permit the quasi-automatic identification of zones of potential geothermal interest along rivers or lakes. The proposed methodology has been applied to a case study in La Hermida (Cantabria, Spain), where it has allowed the identification of an effluent with temperatures close to 40 °C, according to the verification measurements performed on the geothermal interest area. These results allow validation of the potential of the method, which is strongly influenced by the particular characteristics of the study area.

Three-dimensional surveying with a terrestrial laser scanner (TLS) has implied a revolution in the field of 3D modeling, as this methodology provides detailed point-clouds with simplified processes of capture. In addition to the point-clouds, other outputs can be obtained, such as ortho-images, virtual itineraries, 2D cartography, and meshes, which implies a second avenue of multimedia products, such as 3D Portable Document Format (PDF) files and interactive applications. All these options are interesting for the management and broadcast of cultural heritage. The works that have been developed in this research are aimed at setting a workflow for the TLS surveying works and subsequent data management for the generation of a 3D model of the Caliphal Gate of Ceuta, which is considered as one of the most important medieval findings in Spain in recent years, and its immediate surroundings. This model and the different outputs that have been obtained from it allow for the continuation of the historiographic analysis of the complex, while documenting a partial stage in the development of the works of enhancement. In addition to this, these products are not only useful in terms of conservation studies or enhancement, as they are also suitable for the dissemination of the site. Special attention has been set on the paid suitable software for data management while generating the outputs, and for its application by the final users.

No abstract