Background Walking aids such as walking frames offer support during walking, yet paradoxically, people who self-report using them remain more likely to fall than people who do not. Lifting of walking frames when crossing door thresholds or when turning has shown to reduce stability, and certain design features drive the need to lift (e.g. small, non-swivelling wheels at the front). To overcome shortfalls in design and provide better stability, biomechanists and industrial engineers engaged in a Knowledge Transfer Partnership to develop a novel walking frame that reduces the need for lifting during everyday tasks. This paper presents the results for the final prototype regarding stability, safety and other aspects of usability.Methods Four studies were conducted that explored the prototype in relation to the current standard frame: a detailed gait lab study of 9 healthy older adults performing repeated trials for a range of everyday tasks provided mechanical measures of stability, a real-world study that involved 9 users of walking frames provided measures of body weight transfer and lifting events, two interview studies (5 healthcare professionals and 7 users of walking frames) elicited stakeholder perceptions regarding stability, safety and usability. ResultsAnalysis of healthy older adults using a standard walking frame and the prototype frame demonstrated that the prototype increases stability during performance of complex everyday tasks (p < 0.05). Similarly, gait assessments of walking frame users in their home environment showed that the prototype facilitated safer usage patterns and provided greater and more continuous body weight support. Interviews with healthcare professionals and users showed that the prototype was perceived to be safe and effective and hence more usable.Conclusions The outcomes of the separate studies all support the same conclusion: the prototype is an improvement on the status quo, the typical front-wheeled Zimmer frame for indoor use which has not changed in design for decades. The significance of this work lies in the success of the Knowledge Transfer Partnership
This data article provides useful information often required for numerical modeling of the so-called microbond tests. It includes the experimental and simulation data of the microbond testing using Fibre Bragg Grating (FBG) fibres for optical strains. Microbond testing was performed on five different droplets of varying embedded length and diameter to collect the data. Finite element simulation was carried out and modelling was validated, by using two variables force and strain, to collect the data. The output data of the fitted models is given and is also visualized via graphs of force-strain derivative curves. The data of the simulations is provided for different finite element mesh densities. Here, to clarify the type and form of the data for the use by readers, the energy distribution curves describing various functionalities of the droplet, fibre and interface are presented. For further reading, the interpretation and analysis of this data can be found in a research article titled “3D interfacial debonding during microbond testing: Advantages of local strain recording” (R. Dsouza et al., 2020) [1] .
Especially the applications of fibrous composites in miniature products, dental and other medical applications require accurate data of microscale mechanics. The characterization of adhesion between single filament and picoliter-scale polymer matrix usually relies on the experiments using so-called microbond (MB) testing. The traditional MB test systems provide unitary data output (i.e., converted force) which is enigmatic in resolving the fracture parameters of multi-mode interface cracks. As a fundamental basis, the momentary reaction force and respective local strain at the location of a non-ambiguous gradient are needed for a mechanical analysis. In this paper, a monolithic compliant based structure with an integrated Fiber Bragg Grating (FBG) sensor is developed and analysed. The stiffness of the compliant structure is estimated by using mathematical and finite element (FE) models. Qualification experiments are carried out to confirm the functional performance: MB testing of synthetic (carbon and glass) and natural (flax) single filaments are successfully performed. Quasi-static and dynamic analysis of the MB testing is carried out by using the FE method to interpret the response of the compliant structure. The developed strain-sensing CBPM-FBG holder shows excellent sensitivity during the MB tests for both synthetic and natural filaments, even at a low filament diameters as low as $$7\,\upmu \hbox {m}$$ 7 μ m , making the monolithic compliant structure the first instrument capable of force-strain data output for bonded filament-droplet specimens.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.