Electrochemical systems suffer from poor management of evolving gas bubbles. Improved understanding of bubbles behavior helps to reduce overpotential, save energy and enhance the mass transfer during chemical reactions. This work investigates and reviews the gas bubbles hydrodynamics, behavior, and management in electrochemical cells. Although the rate of bubble growth over the electrode surface is well understood, there is no reliable prediction of bubbles break-off diameter from the electrode surface because of the complexity of bubbles motion near the electrode surface. Particle Image Velocimetry (PIV) and Laser Doppler Anemometry (LDA) are the most common experimental techniques to measure bubble dynamics. Although the PIV is faster than LDA, both techniques are considered expensive and time-consuming. This encourages adapting Computational Fluid Dynamics (CFD) methods as an alternative to study bubbles behavior. However, further development of CFD methods is required to include coalescence and break-up of bubbles for better understanding and accuracy. The disadvantages of CFD methods can be overcome by using hybrid methods. The behavior of bubbles in electrochemical systems is still a complex challenging topic which requires a better understanding of the gas bubbles hydrodynamics and their interactions with the electrode surface and bulk liquid, as well as between the bubbles itself.

No abstract

In this study, we tested the use of the bipolar electrodes to enhance electrochemical degradation of trichloroethylene (TCE) in an undivided, flow-through electrochemical reactor. The bipolar electrode forms when an electrically conductive material polarizes between feeder electrodes that are connected to a direct current source and, therefore, creates an additional anode/cathode pair in the system. We hypothesize that bipolar electrodes will generate additional oxidation/reduction zones to enhance TCE degradation. The graphite cathode followed by graphite anode sequence were operated without a bipolar electrode as well as with one and two bipolar graphite electrodes. The system without bipolar electrodes degraded 29% of TCE while the system with one and two bipolar electrodes degraded 38% and 66% of TCE, respectively. It was found that the removal mechanism for TCE in bipolar mode includes hydrodechlorination at the feeder cathode, and oxidation through reaction with peroxide. The results show that the bipolar electrodes presence enhance TCE removal efficiency and rate and imply that they can be used to improve electrochemical treatment of contaminated groundwater.

Electrochemical synthesis of H 2 O 2 offers a great potential for water treatment. However, a significant challenge is the development of efficient cathode materials for the process. Herein, we implement a practical electrochemical cathode modification to support efficient H 2 O 2 electrogeneration via the reduction of dissolved anodic O 2. Graphite felt (GF) is in situ anodically *

In this study we investigate the influence of humic substances (HS) on electrochemical transformation of trichloroethylene (TCE) in groundwater from limestone aquifers. A laboratory flow-through column with an electrochemical reactor that consists of a palladized iron foam cathode followed by a MMO anode was used to induce TCE electro-reduction in groundwater. Up to 82.9% TCE removal was achieved in the absence of HS. Presence of 1, 2, 5, and 10 mgTOC L−1 reduced TCE removal to 70.9%, 61.4%, 51.8% and 19.5%, respectively. The inverse correlation between HS content and TCE removal was linear. Total organic carbon (TOC), dissolved organic carbon (DOC) and absorption properties (A=254 nm, 365 nm and 436 nm) normalized to DOC, were monitored during treatment to understand the behavior and impacts of HS under electrochemical processes. Changes in all parameters occurred mainly after contact with the cathode, which implies that the HS are reacting either directly with electrons from the cathode or with H2 formed at the cathode surface. Since hydrodechlorination is the primary TCE reduction mechanism in this setup, reactions of the HS with the cathode limit transformation of TCE. The presence of limestone gravel reduced the impact of HS on TCE removal. The study concludes that presence of humic substances adversely affects TCE removal from contaminated groundwater by electrochemical reduction using palladized cathodes.