Alteration of the native mitral valve (MV) shape has been hypothesized to have a profound effect on the local tissue stress distribution, and is potentially linked to limitations in repair durability. The present study was undertaken to elucidate the relation between MV annular shape and central mitral valve anterior leaflet (MVAL) strain history, using flat annuloplasty in an ovine model. In addition, we report for the first time the presence of residual in-vivo leaflet strains. In-vivo leaflet deformations were measured using sonocrystal transducers sutured to the MVAL (n=10), with the 3D positions acquired over the full cardiac cycle. In six animals a flat ring was sutured to the annulus and the transducer positions recorded, while in the remaining four the MV was excised from the exsanguinated heart and the stress-free transducer positions obtained. In the central region of the MVAL the peak stretch values, referenced to the minimum left ventricular pressure (LVP), were 1.10 ± 0.01 and 1.31 ± 0.03 (mean ± standard error) in the circumferential and radial directions, respectively. Following flat ring annuloplasty, the central MVAL contracted 28% circumferentially and elongated 16% radially at minimum LVP, and the circumferential direction was under a negative strain state during the entire cardiac cycle. After valve excision from the exsanguinated heart, the MVAL contracted significantly (18% and 30% in the circumferential and radial directions, respectively), indicating the presence of substantial in-vivo residual strains. While the physiological function of the residual strains (and their associated stresses) are at present unknown, accounting for their presence is clearly necessary for accurate computational simulations of MV function. Moreover, we demonstrated that changes in annular geometry dramatically alter valvular functional strains in-vivo. As levels of homeostatic strains are related to tissue remodeling and homeostasis, our results suggest that surgically-introduced alterations in MV shape could lead to the long term MV mechanobiological and microstructural alterations that could ultimately affect MV repair durability.

Estimation of regional tissue stresses in the functioning heart valve remains an important goal in our understanding of normal valve function and in developing novel engineered tissue strategies for valvular repair and replacement. Methods to accurately estimate regional tissue stresses are thus needed for this purpose, and in particular to develop accurate, statistically informed means to validate computational models of valve function. Moreover, there exists no currently accepted method to evaluate engineered heart valve tissues and replacement heart valve biomaterials undergoing valvular stresses in blood contact. While we have utilized mitral valve anterior leaflet valvuloplasty as an experimental approach to address this limitation, robust computational techniques to estimate implant stresses are required. In the present study, we developed a novel numerical analysis approach for estimation of the in-vivo stresses of the central region of the mitral valve anterior leaflet (MVAL) delimited by a sonocrystal transducer array. The in-vivo material properties of the MVAL were simulated using an inverse FE modeling approach based on three pseudo-hyperelastic constitutive models: the neo-Hookean, exponential-type isotropic, and full collagen-fiber mapped transversely isotropic models. A series of numerical replications with varying structural configurations were developed by incorporating measured statistical variations in MVAL local preferred fiber directions and fiber splay. These model replications were then used to investigate how known variations in the valve tissue microstructure influence the estimated ROI stresses and its variation at each time point during a cardiac cycle. Simulations were also able to include estimates of the variation in tissue stresses for an individual specimen dataset over the cardiac cycle. Of the three material models, the transversely anisotropic model produced the most accurate results, with ROI averaged stresses at the fully-loaded state of 432.6±46.5 kPa and 241.4±40.5 kPa in the radial and circumferential directions, respectively. We conclude that the present approach can provide robust instantaneous mean and variation estimates of tissue stresses of the central regions of the MVAL.

As the next step in our investigations into the structural adaptations of the main pulmonary artery (PA) during postnatal growth, we utilized the extensive experimental measurements of the growing ovine PA from our previous study (Fata et al., 2013, "Estimated in vivo Postnatal Surface Growth Patterns of the Ovine Main Pulmonary Artery and Ascending Aorta," J. Biomech. Eng., 135(7), pp. 71010-71012). to develop a structural constitutive model for the PA wall tissue. Novel to the present approach was the treatment of the elastin network as a distributed fiber network rather than a continuum phase. We then utilized this model to delineate structure-function differences in the PA wall at the juvenile and adult stages. Overall, the predicted elastin moduli exhibited minor differences remained largely unchanged with age and region (in the range of 150 to 200 kPa). Similarly, the predicted collagen moduli ranged from ∼1,600 to 2700 kPa in the four regions studied in the juvenile state. Interestingly, we found for the medial region that the elastin and collagen fiber splay underwent opposite changes (collagen standard deviation juvenile = 17 deg to adult = 28 deg, elastin standard deviation juvenile = 35 deg to adult = 27 deg), along with a trend towards more rapid collagen fiber strain recruitment with age, along with a drop in collagen fiber moduli, which went from 2700 kPa for the juvenile stage to 746 kPa in the adult. These changes were likely due to the previously observed impingement of the relatively stiff ascending aorta on the growing PA medial region. Intuitively, the effects of the local impingement would be to lower the local wall stress, consistent with the observed parallel decrease in collagen modulus. These results suggest that during the postnatal somatic growth period local stresses can substantially modulate regional tissue microstructure and mechanical behaviors in the PA. We further underscore that our previous studies indicated an increase in effective PA wall stress with postnatal maturation. When taken together with the fact that the observed changes in mechanical behavior and structure in the growing PA wall were modest in the other three regions studied, our collective results suggest that the majority of the growing PA wall is subjected to increasing stress levels with age without undergoing major structural adaptations. This observation is contrary to the accepted theory of maintenance of homeostatic stress levels in the regulation of vascular function, and suggests alternative mechanisms might regulate postnatal somatic growth. Understanding the underlying mechanisms will help to improve our understanding of congenital defects of the PA and lay the basis for functional duplication in their repair and replacement.

Pregnancy produces rapid, non-pathological volume-overload in the maternal circulation due to the demands of the growing fetus. Using a bovine model for human pregnancy, previous work in our laboratory has shown remarkable pregnancy-induced changes in leaflet size and mechanics of the mitral valve. The present study sought to relate these changes to structural alterations in the collagenous leaflet matrix. Anterior mitral valve leaflets were harvested from non-pregnant heifers and pregnant cows (pregnancy stage estimated by fetal length). We measured changes in the thickness of the leaflet and its anatomic layers via Verhoeff-Van Gieson staining, and in collagen crimp (wavelength and percent collagen crimped) via picrosirius red staining and polarized microscopy. Collagen concentration was determined biochemically: hydroxyproline assay for total collagen and pepsin-acid extraction for uncrosslinked collagen. Small-angle light scattering (SALS) assessed changes in internal fiber architecture (characterized by degree of fiber alignment and preferred fiber direction). Pregnancy produced significant changes to collagen structure in the mitral valve. Fiber alignment decreased 17% with an 11.5° rotation of fiber orientation toward the radial axis. Collagen fiber crimp was dramatically lost, accompanied by a 53% thickening of the fibrosa, and a 16% increase in total collagen concentration, both suggesting that new collagen is being synthesized. Extractable collagen concentration was low, both in the non-pregnant and pregnant state, suggesting early crosslinking of newly-synthesized collagen. This study has shown that the mitral valve is strongly adaptive during pregnancy, with significant changes in size, collagen content and architecture in response to rapidly changing demands.

Intrinsic cardiac-induced deformation of brain tissue is thought to be important in the pathophysiology of various neurological disorders. In this study, we evaluated the feasibility of utilizing displacement encoding with stimulated echoes (DENSE) magnetic resonance imaging (MRI) to quantify two-dimensional (2D) neural tissue strain using cardiac-driven brain pulsations. We examined eight adult healthy volunteers with an electrocardiogram-gated spiral DENSE sequence performed at the midsagittal plane on a 3 Tesla MRI scanner. Displacement, pixel-wise trajectories, and principal strains were determined in seven regions of interest (ROI): the brain stem, cerebellum, corpus callosum, and four cerebral lobes. Quantification of small neural tissue motion and strain along with their spatial and temporal variations in different brain regions was found to be feasible using DENSE. The medial and inferior brain structures (brain stem, cerebellum, and corpus callosum) had significantly larger motion and strain compared to structures located more peripherally. The brain stem had the largest peak mean displacement (PMD) (187 ± 50 μm, mean ± SD). The largest mean principal strains in compression and extension were observed in the brain stem (0.38 ± 0.08%) and the corpus callosum (0.37 ± 0.08%), respectively. Measured values in percent strain were altered by as much as 0.1 between repeated scans. This study showed that DENSE can quantify regional variations in brain tissue motion and strain and has the potential to be utilized as a tool to evaluate the changes in brain tissue dynamics resulting from alterations in biomechanical stresses and tissue properties.

Our noninvasive, in vivo quantification is free of numerous ethical issues and potential limitations involved with ex vivo examinations. If further studies confirm that the iris stiffness is an omnipresent PACG risk factor and a mechanistic role between increased iris stiffness and angle-closure glaucoma does exist, treatment methods such as lowering the iris stiffness can be developed.

Native semi-lunar heart valves are composed of a dense fibrous network that generally follows a curvilinear path along the width of the leaflet. Recent models of engineered valve leaflets have predicted that such curvilinear fiber orientations would homogenize the strain field and reduce stress concentrations at the commissure. In the present work, a method was developed to reproduce this curvilinear fiber alignment in electrospun scaffolds by varying the geometry of the collecting mandrel. Elastomeric poly(ester urethane)urea was electrospun onto rotating conical mandrels of varying angles to produce fibrous scaffolds where the angle of fiber alignment varied linearly over scaffold length. By matching the radius of the conical mandrel to the radius of curvature for the native pulmonary valve, the electrospun constructs exhibited a curvilinear fiber structure similar to the native leaflet. Moreover, the constructs had local mechanical properties comparable to conventional scaffolds and native heart valves. In agreement with prior modeling results, it was found under quasi-static loading that curvilinear fiber microstructures reduced strain concentrations compared to scaffolds generated on a conventional cylindrical mandrels. Thus, this simple technique offers an attractive means for fabricating scaffolds where key microstructural features of the native leaflet are imitated for heart valve tissue engineering.

No abstract