Zinc-ion batteries are under current research focus because of their uniqueness in low cost and high safety. However, it is still desirable to improve the rate performance by improving the Zn (de)intercalation kinetics and long-cycle stability by eliminating the dendrite formation problem. Herein, the first paradigm of a high-rate and ultrastable flexible quasi-solid-state zinc-ion battery is constructed from a novel 2D ultrathin layered zinc orthovanadate array cathode, a Zn array anode supported by a conductive porous graphene foam, and a gel electrolyte. The nanoarray structure for both electrodes assures the high rate capability and alleviates the dendrite growth. The flexible Zn-ion battery has a depth of discharge of ≈100% for the cathode and 66% for the anode, and delivers an impressive high-rate of 50 C (discharge in 60 s), long-term durability of 2000 cycles at 20 C, and unprecedented energy density ≈115 Wh kg , together with a peak power density ≈5.1 kW kg (calculation includes masses of cathode, anode, and current collectors). First principles calculations and quantitative kinetics analysis show that the high-rate and stable properties are correlated with the 2D fast ion-migration pathways and the introduced intercalation pseudocapacitance.

A large quantity of nanosized ZnO tubular structures was prepared using a very simple thermal evaporation of mixed Zn–ZnO powders under a wet oxidation condition. The ZnO nanotubes have a hollow core with crystalline wall of 8–20 nm in thickness. Optical properties of ZnO nanotubes were studied at room temperature. Raman peaks arising from the ZnO nanotubes were analyzed, which correspond well to that of the bulk ZnO sample. The photoluminescence measurements of ZnO nanotubes revealed an intensive UV peak at 377 nm corresponding to the free exciton emission, and a broad peak at about 500 nm arising from defect-related emission.

Fabricating ultrathin two-dimensional (2D) covalent organic framework (COF) nanosheets (NSs) in large scale and high yield still remains a great challenge. This limits the exploration of the unique functionalities and wide range of application potentials of such materials. Herein, we develop a scalable general bottom-up approach to facilely synthesize ultrathin (<2.1 nm) imine-based 2D COF NSs (including COF-366 NSs, COF-367 NSs, COF-367-Co NSs, TAPB-PDA COF NSs, and TAPB-BPDA COF NSs) in large scale (>100 mg) and high yield (>55%), via an imine-exchange synthesis strategy through adding large excess amounts of 2,4,6-trimethylbenzaldehyde into the reaction system under solvothermal conditions. Impressively, visualization of the periodic pore lattice for COF-367 NSs by a scanning tunneling microscope (STM) clearly discloses the ultrathin 2D COF nature. In particular, the ultrathin COF-367-Co NSs isolated are subject to the heterogeneous photocatalyst for CO2-to-CO conversion, showing excellent efficiency with a CO production rate as high as 10 162 μmol g–1 h–1 and a selectivity of ca. 78% in aqueous media under visible-light irradiation, far superior to corresponding bulk materials and comparable with the thus far reported state-of-the-art visible-light driven heterocatalysts.

Well-aligned arrays of ZnO nanoneedles were fabricated using a simple vapor phase growth. The diameters of the nanoneedle tips are as small as several nanometers, which is highly in favor of the field emission. Field-emission measurements using the nanoneedle arrays as cathode showed emission current density as high as 2.4 mA/cm2 under the field of 7 V/μm, and a very low turn-on field of 2.4 V/μm. Such a high emission current density is attributed to the high aspect ratio of the nanoneedles. The high emission current density, high stability, and low turn-on field make the ZnO nanoneedle arrays one of the promising candidates for field-emission displays.

Integrated nanodevices with the capability of storing energy are widely applicable and have thus been studied extensively. To meet the demand for flexible integrated devices, all-solid-state asymmetric supercapacitors that simultaneously realize energy storage and optoelectronic detection were fabricated by growing Co3 O4 nanowires on nickel fibers, thus giving the positive electrode, and employing graphene as both the negative electrode and light-sensitive material. The as-assembled integrated systems were characterized by an improved energy storage, enhanced power density (at least by 1860 % enhanced) by improving the potential window from 0-0.6 V to 0-1.5 V, excellent photoresponse to white light, and superior flexibility of both the fiber-based asymmetric supercapacitor and the photodetector. Such flexible integrated devices might be used in smart and self-powered sensory, wearable, and portable electronics.

A nitrogen-doped graphene/sulfur composite was further modified with atomic layers of TiO2and used as the cathode of lithium–sulfur batteries, exhibiting superior cycling stability, good rate capability and high coulombic efficiency.

No abstract

Co2P nanostructures with rod-like and flower-like morphologies have been synthesized by controlling the decomposition process of Co(acac)3 in oleylamine system with triphenylphosphine as phosphorus source. Investigations indicate that the final morphologies of the products are determined by their peculiar phosphating processes. Electrochemical measurements manifest that the Co2P nanostructures exhibit excellent morphology-dependent supercapacitor properties. Compared with that of 284 F g(-1) at a current density of 1 A g(-1) for Co2P nanorods, the capacitance for Co2P nanoflowers reaches 416 F g(-1) at the same current density. Furthermore, an optimized asymmetric supercapacitor by using Co2P nanoflowers as anode and graphene as cathode is fabricated. It can deliver a high energy density of 8.8 Wh kg(-1) (at a high power density of 6 kW kg(-1)) and good cycling stability with over 97% specific capacitance remained after 6000 cycles, which makes the Co2P nanostructures potential applications in energy storage/conversion systems. This study paves the way to explore a new class of cobalt phosphide-based materials for supercapacitor applications.