The autoxidation kinetics of stripped sunflower oil (SSO), squalene (SQ), and p-cymene (p-C) initiated by 2,2′-azobis­(isobutyronitrile) at 303 K were investigated under controlled conditions by differential oximetry in order to build reference model systems that are representative of the natural variability of oxidizable materials, for quantitative antioxidant testing. Rate constants for oxidative chain propagation (k p) and chain termination (2k t) and the oxidizability (k p/√2k t) were measured using 2,6-di-tert-butyl-4-methoxyphenol, 2,2,5,7,8-pentamethyl-6-chromanol, BHT, and 4-methoxyphenol as reference antioxidants. Measured values of k p (M–1 s–1)/2k t (M–1 s–1)/oxidizability (M–1/2 s–1/2) at 303 K in chlorobenzene were 66.9/3.45 × 106/3.6 × 10–2, 68.0/7.40 × 106/2.5 × 10–2, and 0.83/2.87 × 106/4.9 × 10–4, respectively, for SSO, SQ, and p-C. Quercetin, magnolol, caffeic acid phenethyl ester, and 2,4,6-trimethylphenol were investigated to validate calibrations. The distinctive usefulness of the three substrates in testing antioxidants is discussed.

Essential oils (EOs) have promising antioxidant activities which are gaining interest as natural alternatives to synthetic antioxidants in the food and cosmetic industries. However, quantitative data on chain-breaking activity and on the kinetics of peroxyl radical trapping are missing. Five phenol-rich EOs were analyzed by GC-MS and studied by oxygen-uptake kinetics in inhibited controlled autoxidations of reference substrates (cumene and squalene). Terpene-rich Thymus vulgaris (thymol 4%; carvacrol 33.9%), Origanum vulgare, (thymol 0.4%; carvacrol 66.2%) and Satureja hortensis, (thymol 1.7%; carvacrol 46.6%), had apparent kinh (30 °C, PhCl) of (1.5 ± 0.3) × 104, (1.3 ± 0.1) × 104 and (1.1 ± 0.3) × 104 M−1s−1, respectively, while phenylpropanoid-rich Eugenia caryophyllus (eugenol 80.8%) and Cinnamomum zeylanicum, (eugenol 81.4%) showed apparent kinh (30 °C, PhCl) of (5.0 ± 0.1) × 103 and (4.9 ± 0.3) × 103 M−1s−1, respectively. All EOs already granted good antioxidant protection of cumene at a concentration of 1 ppm (1 mg/L), the duration being proportional to their phenolic content, which dictated their antioxidant behavior. They also afforded excellent protection of squalene after adjusting their concentration (100 mg/L) to account for the much higher oxidizability of this substrate. All investigated EOs had kinh comparable to synthetic butylated hydroxytoluene (BHT) were are eligible to replace it in the protection of food or cosmetic products.

Soil is a non-renewable natural resource. However, the current rates of soil usage and degradation have led to a loss of soil for agriculture, habitats, biodiversity, and to ecosystems problems. Urban and former industrial areas suffer particularly of these problems, and compensation measures to restore environmental quality include the renaturation of dismissed areas, de-sealing of surfaces, or the building of green infrastructures. In this framework, the development of methodologies for the creation of soils designed to mimic natural soil and suitable for vegetation growth, known as constructed soils or technosols, are here reviewed. The possible design choices and the starting materials have been described, using a circular economy approach, i.e., preferring non-contaminated wastes to non-renewable resources. Technosols appear to be a good solution to the problems of land degradation and urban green if using recycled wastes or by-products, as they can be an alternative to the remediation of contaminated sites and to importing fertile agricultural soil. Nevertheless, waste use requires analysis to ensure the salubrity of the starting materials. Moreover, materials produced on site or nearby minimize the cost and the environmental impact of transport, thus the involvement of local stakeholders in the urban land management must be encouraged.