No abstract

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.

No abstract

Excess volumes and kinematic viscosities have been measured with a vibrating tube densimeter and an Ubbelohde viscometer for nine binary systems containing organic compounds. Excess volumes have been correlated by means of a polynomial expression and viscosities by means of the McAllister equation. The systems studied are 1-butanol/ethyl acetate; 1-butanol/n-butyl acetate; 1-butanol/p -xylene; ethylbenzene/2-ethoxyethanol; ethylbenzene/2-butanone; 1 -butanol/ethylbenzene; toluene/ethylbenzene; n -butyl acetate/2-hexanone; and n-butyl acetate/n-amyl acetate. Investigations have been carried out at atmospheric pressure and 298.15 K.

No abstract

No abstract

Because of its high biocompatibility, bio-degradability, low-cost and easy availability, cellulose finds application in disparate areas of research. Here we focus our attention on the most recent and attractive potential applications of cellulose in the biomedical field. We first describe the chemical/structural composition of cellulose fibers, the cellulose sources/features and cellulose chemical modifications employed to improve its properties. We then move to the description of cellulose potential applications in biomedicine. In this field, cellulose is most considered in recent research in the form of nano-sized particle, i.e., nanofiber cellulose (NFC) or cellulose nanocrystal (CNC). NFC is obtained from cellulose via chemical and mechanical methods. CNC can be obtained from macroscopic or microscopic forms of cellulose following strong acid hydrolysis. NFC and CNC are used for several reasons including the mechanical properties, the extended surface area and the low toxicity. Here we present some potential applications of nano-sized cellulose in the fields of wound healing, bone-cartilage regeneration, dental application and different human diseases including cancer. To witness the close proximity of nano-sized cellulose to the practical biomedical use, examples of recent clinical trials are also reported. Altogether, the described examples strongly support the enormous application potential of nano-sized cellulose in the biomedical field.

No abstract