Betonarme elemanların eğrilik sünekliğinin doğru tahmini, sismik yükler altında binaların kapasitesinin güvenilir bir tahminini sağladığı için her zaman çekici bir çalışma konusu olmuştur. Bu çalışmada; malzeme modelinin, eksenel yükün ve sargı donatı oranının betonarme kolonların davranışı üzerindeki etkisi analitik olarak araştırılmıştır. Kare kesitli kolon modelleri tasarlanmıştır. Kolonların davranışı, malzemelerin doğrusal olmayan davranışı dikkate alınarak moment-eğrilik ilişkisinden değerlendirilmiştir. Betonarme kolonların farklı eksenel yük seviyeleri ve sargı donatı oranları için moment eğrilik ilişkileri Mander modeli dikkate alınarak elde edilmiştir. Parametrelerin kolon davranışı üzerindeki incelenen etkileri kesitin mukavemeti, süneklik ve etkin rijitlik açısından değerlendirilmiştir. Tasarlanan betonarme kolon kesitlerde, farklı parametrelerin moment eğrilik ilişkisi, sünekliği ve etkin rijitlik üzerindeki etkisi hesaplanarak karşılaştırılmıştır. Eksenel yük ve sargı donatı oranının değişiminin, betonarme kolonların moment-eğrilik davranışı üzerinde önemli bir etkiye sahip olduğu gözlenmiştir. Çatlamış kesitin etkin rijitliği sabit olmasa da sargı donatı oranı ve kesit üzerine etki eden eksenel kuvvet gibi parametrelere bağlı olarak değişmektedir.
Bu çalışmada Türkiye Bina Deprem Yönetmeliği 2018 ve Mander modellerine göre sargılı betonarme kolonların gerilme-şekil değiştirme ilişkileri incelenmiştir. Önerilen sargılı beton modellerine göre betonarme kolonlar için sargılı beton basınç dayanımı ve gerilme-şekil değiştirme ilişkileri araştırılmıştır. Sargılı betonun davranışının daha iyi anlaşılabilmesi için gerilme-şekil değiştirme bağıntıları ve sargılı beton modelleri hakkında bilgi verilmiştir. Sargılı betonun davranışını araştırmak için farklı sargı donatı çapı ve farklı sargı donatı aralığına sahip kare en-kesitli betonarme kolon modelleri tasarlanmıştır. Sargı donatısı çapının ve aralıklarının sargılı beton basınç dayanımına etkisi araştırılmıştır. Kare en-kesitli kolonların farklı sargılı beton modelleri dikkate alınarak gerilme-şekil değiştirme ilişkileri araştırılarak karşılaştırılmıştır. Tasarlanan kare en-kesitli kolon modellerinde sargılı beton basınç dayanımları ve basınç birim şekil değiştirmeleri hesaplanarak gerilmeşekil değiştirme grafikleri elde edilmiştir. Analiz sonuçlarından elde edilen sonuçlar farklı parametrelere göre karşılaştırılarak yorumlanmıştır. TBDY 2018 ve Mander modeli ile elde edilen sonuçlar karşılaştırılarak yorumlanmıştır. Modellerde farklı çaplarda ve aralıklarda sargı donatısı kullanımının, farklı parametrelerde tasarlanan betonarme kolon kesitlerinde çekirdek betona uygulanan etkili yanal basınçları ve sargılı beton basınç dayanımlarını etkilediği sonucu elde edilmiştir.
performance levels of reinforced concrete columns, total unit deformations of concrete calculated according to different confining reinforcement ratios, and yield rotation and plastic rotation values at different axial load levels. From the analysis, it was obtained that the damage limits decreased with the increase of the axial load level, the amount of confining reinforcement became more important at the same axial load levels and the damage limits envisaged by the regulation were extremely effective.
Doğrusal olmayan statik prosedür (NSP) veya itme analizi basitliği nedeniyle, yapısal ve yapısal olmayan elemanların performanslarının hesaplanması için kullanılmaktadır. Modelleme yapılırken yapıdaki her bir elemanın doğrusal olmayan özelliklerinin ve deformasyon kapasitelerinin belirlenmesi gerekmektedir. İtme analizi, TBDY 2018 ve ASCE 41-17 yönetmeliklerine göre, kullanıcı tanımlı doğrusal olmayan plastik mafsal özellikleri veya varsayılan mafsal özellikleri için gerçekleştirilir. Varsayılan mafsal özelliklerinin yanlış kullanılması, mevcut yapılar için hatalı yer değiştirme kapasitelerine yol açabilmektedir. Bu çalışmada, ASCE 41-17'e ve TBDY 2018'e tek açıklıklı bir yapının performans analizi yapılmış ve sonuçlar karşılatılmıştır. Parametrik çalışma için yapının kat sayıları değiştirilmiştir. Yapı sistemleri üzerinde gerçekleştirilen analizler sonucunda kapasite eğrileri elde edilmiştir. ASCE 41-17'ye göre hesaplanan tepe yer değiştirme miktarı TBDY 2018'e göre hesaplanan tepe yer değiştirme miktarından daha fazla elde edilmiştir. TBDY 2018'e göre hesaplanan taban kesme kuvveti ve kat kesme kuvvetleri ASCE 41-17'ye göre daha fazla elde edilmiştir. TBDY 2018 ve ASCE 41-17'ye göre elde edilen analizler sonucunda yapının performansının, yapıya etkiyen düşey yük miktarına, elemanların etkili rijitliğine ve plastik mafsal özelliklerine bağlı olduğu anlaşılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.