After the 2009 April 6th Mw 6.3 L'Aquila earthquake (Central Italy) the Italian Civil Defense Department promoted the microzoning study in the ten zones in the epicentral area that suffered major damage. In this paper we present the activities and the results concerning a temporary seismic network installed in the historical L'Aquila city center indicated as "macroarea 1" in the microzoning project. Seismic data were collected to investigate the amplification effects in the city and to support the microzoning activities in verifying both geological profiles and 1D numerical modeling of the seismic response of the city. The conventional spectral approaches using both microtremor and earthquake data allowed to determine the fundamental resonance frequencies and the amplification factors within the city respectively. The spatial variability of these quantities can be related to the geological and geomorphologic characteristics of the investigated area. A comparison between the network data and the data recorded by the two strong motion instruments installed in the city was also made. This allows verifying the relative response of the accelerometric stations that recorded in the city the major events of the sequence.
We present the results of seismological and geophysical investigations performed by the "Istituto Nazionale di Geofisica e Vulcanologia" team operating in Amatrice village (Central Italy), in the emergency phases following the Mw 6.0 event of August 24th 2016, that caused severe damage in downtown and surrounding areas. Data from seven seismic stations equipped with both weak and strong motion sensors are analyzed in terms of standard spectral ratio to empirically define amplification function using a bedrock reference site. Ambient vibration spectral ratios between horizontal and vertical component of motion are also evaluated in a large number of sites, spread out in the investigated area, to recover the resonance frequency of the soft soil outcropping layers and to generalize the results obtained by earthquake data. Ambient noise vibration are also used for applying a 2D array approach based on surface waves techniques in order to define the near-surface velocity model and to verify its lateral variation. The results allows to better understand the amplification factors in the investigated area, showing spatial variation of site effects despite of the homogeneous shallow geological condition indicated by the microzonation studies available at moment of the described field campaign. The analysis reveals a diffuse amplification effect which reaches its maximum values in downtown area with a resonant frequency of about 2 Hz. The obtained results were used to integrate the microzonation studies and they can be used for urban planning and reconstruction activities.
A temporary network of 33 seismic stations was deployed in the area struck by the 6th April 2009, Mw 6.1 (Scognamiglio et al. in Seism Res Lett 6/81, 2010), L'Aquila earthquake (central Italy), with the aim to investigate the site amplification within the Aterno river Valley. The seismograms of 18 earthquakes recorded by 14 of the 33 stations were used to evaluate the average horizontal to vertical spectral ratio (HVSR) for each site and the 123 698 Bull Earthquake Eng (2011) 9:697-715standard horizontal spectral ratio (SSR) between a site and a reference station. The obtained results have been compared to the geological and geophysical information in order to explain the resonance frequencies and the amplification levels with respect to surface geology of the valley. The results indicate that there is no uniform pattern of amplification, because of the complex geologic setting, as the thickness and degree of cementation of the deposits is highly variable.
In August 2016, a magnitude 6.0 earthquake struck Central Italy, starting a devastating seismic sequence, aggravated by other two events of magnitude 5.9 and 6.5, respectively. After the first mainshock, four Italian institutions installed a dense temporary network of 50 seismic stations in an area of 260 km2. The network was registered in the International Federation of Digital Seismograph Networks with the code 3A and quoted with a Digital Object Identifier (10.13127/SD/ku7Xm12Yy9). Raw data were converted into the standard binary miniSEED format, and organized in a structured archive. Then, data quality and completeness were checked, and all the relevant information was used for creating the metadata volumes. Finally, the 99 Gb of continuous seismic data and metadata were uploaded into the INGV node of the European Integrated Data Archive repository. Their use was regulated by a Memorandum of Understanding between the institutions. After an embargo period, the data are now available for many different seismological studies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.