Bismuth (Bi) has been known as a highly efficient electrocatalyst for CO 2 reduction reaction. Stable free-standing two-dimensional Bi monolayer (Bismuthene) structures have been predicted theoretically, but never realized experimentally. Here, we show the first simple large-scale synthesis of free-standing Bismuthene, to our knowledge, and demonstrate its high electrocatalytic efficiency for formate (HCOO −) formation from CO 2 reduction reaction. The catalytic performance is evident by the high Faradaic efficiency (99% at −580 mV vs. Reversible Hydrogen Electrode (RHE)), small onset overpotential (<90 mV) and high durability (no performance decay after 75 h and annealing at 400°C). Density functional theory calculations show the structure-sensitivity of the CO 2 reduction reaction over Bismuthene and thicker nanosheets, suggesting that selective formation of HCOO − indeed can proceed easily on Bismuthene (111) facet due to the unique compressive strain. This work paves the way for the extensive experimental investigation of Bismuthene in many different fields.

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecularlevel thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst−support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free highperformance and durable alkaline fuel cells and related technologies.

A remaining challenge for deployment of proton-exchange membrane fuel cells is the limited durability of Pt-nanoscale materials that operate at high voltages during the cathodic oxygen reduction reaction. In this work, atomic-scale insight into well-defined single crystalline, thin-film, and nanoscale surfaces exposed Pt dissolution trends that governed the design and synthesis of durable materials. A newly defined metric, intrinsic dissolution, is essential to understanding the correlation between the measured Pt loss, surface structure, size and ratio of Pt-nanoparticles in carbon support. It was found that utilization of Au underlayer promotes ordering of Pt surface atoms towards (111)structure, while Au on the surface selectively protects low-coordinated Pt sites. This mitigation strategy was applied towards 3 nm Pt 3 Au/C nanoparticles, resulting in elimination of Pt dissolution in liquid electrolyte, including 30-fold durability improvement vs. 3 nm Pt/C over extended potential range up to 1.2 V.

Kinetic and density functional theory studies probe the catalytic involvements of proton–hydride pairs in breaking the strong aromaticity of N-containing heteroarenes (pyridine and pyrrole) on sulfided Ru cluster surfaces. Under the sulfur chemical potentials relevant to hydrodenitrogenation catalysis, Ru clusters remain covered with a layer of sulfur-deficient RuS x on which a variety of reactive hydrogen species, which bind to Ru4+, S2–, or Ru4+–S as Ru4+–(Hδ−), S2––(Hδ+), and Ru4+–(SH2), respectively, coexist. These reactive hydrogen species exhibit either proton or hydride character, depending on the electronegativity of their ligands (ruthenium and sulfur). For this reason, they participate in different hydrogen addition steps during the hydrogenation of heterocyclic-N compounds. Pyridine as the basic and pyrrole as the nonbasic heterocyclic model compounds undergo hydrogenation via distinctly different kinetically relevant steps because of their different proton affinities, which influence their interactions with the various reactive hydrogen species and in turn adsorption configurations. The hydrogenation of pyridine initiates from an initial, quasi-equilibrated proton attack onto the N atom, followed by a second hydridic hydrogen addition as the kinetically relevant step. In the contrasting case of pyrrole, the hydrogenation initiates via a kinetically relevant proton attack to its β-carbon that breaks its aromaticity before a hydride addition onto its α-carbon. Both reactions require a proton attack followed by a hydride attack, but their mechanistic differences lead to contrasting rate dependences with H2S pressure because the H2S pressure, together with H2 pressure, gives the H2S:H2 ratio that dictates the sulfur chemical potentials, the relative abundance of S anions and Ru cations coordinating to the hydrogen species, and in turn the surface concentrations of proton and hydride intermediates on Ru cluster surfaces. The catalytic involvements of proton–hydride pairs described here are general for hydrogenation reactions and, in particular, heteroarene hydrogenation in hydrotreatment processes.

Significance We present a groundbreaking advance in completely nonprecious hydrogen fuel cell technologies achieving a record power density of 200 mW/cm 2 with Ni@CN x anode and Co−Mn cathode. The 2-nm CN x coating weakens the O-binding energy, which effectively mitigates the undesirable surface oxidation during hydrogen oxidation reaction (HOR) polarization, leading to a stable fuel cell operation for Ni@CN x over 100 h at 200 mA/cm 2 , superior to a Ni nanoparticle counterpart. Ni@CNx exhibited a dramatically enhanced tolerance to CO relative to Pt/C, enabling the use of hydrogen gas with trace amounts of CO, critical for practical applications. The complete removal of precious metals in fuel cells lowers the catalyst cost to virtually negligible levels and marks a milestone for practical alkaline fuel cells.