A novel variational framework to model the fatigue behavior of brittle materials based on a phase-field approach to fracture is presented. The standard regularized free energy functional is modified introducing a fatigue degradation function that effectively reduces the fracture toughness as a proper history variable accumulates. This macroscopic approach allows to reproduce the main known features of fatigue crack growth in brittle materials. Numerical experiments show that the Wöhler curve, the crack growth rate curve and the Paris law are naturally recovered, while the approximate Palmgren-Miner criterion and the monotonic loading condition are obtained as special cases.
In the framework of rate-independent systems, a family of elastic-plastic-damage models is proposed through a variational formulation. Since the goal is to account for softening behaviors until the total failure, the dissipated energy contains a gradient damage term in order to limit localization effects. The resulting model owns a great flexibility in the possible coupled responses, depending on the constitutive parameters. Moreover, considering the one-dimensional quasi-static problem of a bar under simple traction and constructing solutions with localization of damage, it turns out that in general a cohesive crack appears at the center of the damage zone before the rupture. The associated cohesive law is obtained in a closed form in terms of the parameters of the model
Portable closed chambers provide a valuable tool for measuring crop photosynthesis and evapotranspiration. Typically, the rates of change of CO2 and water vapor concentration are assumed to be constant in the short time required to make the closed-chamber measurement, and a linear regression model is used to estimate the CO2 and H2O fluxes. However, due to the physical and physiological effects the measurement system has on the measured process, assuming a constant rate and using a linear model may underestimate the flux. Our objective was to provide a model that estimates the CO2 and H20 exchange rates at the time of chamber closure. We compared the linear regression model with a quadratic regression model using field measurements from two studies. Generally, 60 to 100% of all chamber measurement data sets were significantly nonlinear, causing the quadratic model to yield fluxes 10 to 40% greater than those calculated with the linear regression model. The frequency and degree of nonlinearity were related to the measured rate and chamber volume. Closed-chamber data should be tested for nonlinearity and an appropriate model used to calculate flux. The quadratic model provides users of well-mixed closed chambers an alternative to a simple linear model for data sets with significant nonlinearity.
Plasticity and damage are two fundamental phenomena in nonlinear solid mechanics associated to the development of inelastic deformations and the reduction of the material stiffness. Alessi et al. [4] have recently shown, through a variational framework, that coupling a gradient-damage model with plasticity can lead to macroscopic behaviours assimilable to ductile and cohesive fracture. Here, we further expand this approach considering specific constitutive functions frequently used in phase-field models of brittle fracture. A numerical solution technique of the coupled elastodamage-plasticity problem, based on an alternate minimisation algorithm, is proposed and tested against semi-analytical results. Considering a one-dimensional traction test, we illustrate the properties of four different regimes obtained by a suitable tuning of few key constitutive parameters. Namely, depending on the relative yield stresses and softening behaviours of the plasticity and the damage criteria, we obtain macroscopic responses assimilable to (i) brittle fracturè a la Griffith, (ii) cohesive fractures of the Barenblatt or Dugdale type, and (iii) a sort of cohesive fracture including a depinning energy contribution. The comparisons between numerical and analytical results prove the accuracy of the proposed numerical approaches in the considered quasi-static time-discrete setting, but they also emphasise some subtle issues occurring during time-discontinuous evolutions.
The present paper aims at modeling complex fracture phenomena where different damaging mechanisms are involved. For this purpose, the standard one-variable phase-field/gradient damage model, able to regularize Griffith's isotropic brittle fracture problem, is extended to describe different degradation mechanisms through several distinct damage variables. Associating with each damage variable a different dissipated fracture energy, the coupling between all mechanisms is achieved through the degradation of the elastic stiffness. The framework is very general and can be tailored to many situations where different fracture mechanisms are present as well as to model anisotropic fracture phenomena. In this first work, after a general presentation of the model, the attention is focused on a specific paradigmatic case, namely the brittle fracture problem of a 2D homogeneous orthotropic medium with two different damaging mechanisms with respect to the two orthogonal directions. Illustrative numerical applications consider propagation in mode I and II as well as kinking of cracks as a result of a transition between the two fracture mechanisms. It is shown that the proposed model and numerical implementation compares well with theoretical and experimental results, allowing to reproduce specific features of crack propagation in anisotropic materials whereas standard models using one damage variable seem unable to do so.
In the last few years several authors have proposed different phasefield models aimed at describing ductile fracture phenomena. Most of these models fall within the class of variational approaches to fracture proposed by Francfort and Marigo [13]. For the case of brittle materials, the key concept due to Griffith consists in viewing crack growth as the result of a competition between bulk elastic energy and surface energy. For ductile materials, however, an additional contribution to the energy dissipation is present and is related to plastic deformations. Of crucial importance for the performance of the modeling approaches is the way the coupling is realized between plasticity and phase field evolution. Our aim is a critical revision of the main constitutive choices underlying the available models and a comparative study of the resulting predictive capabilities.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.