Abstract. This study focuses on the effect of channel depth on the heat transfer coefficient during nucleate pool boiling. Experimental studies were performed for saturated deionized water, and Novec-649 as working fluids at atmospheric pressure. Copper surfaces were modified to form microchannels with different geometrical properties. The microchannels were from 0.2 mm to 0.4 mm deep, 0.3 mm wide and spaced every 0.1 mm. The experiment was conducted for increasing heat flux up to the critical heat flux point. The surface modification provided an appreciably higher heat transfer coefficient compared to the smooth surface for all boiling liquids. The maximum heat transfer coefficient obtained exceeded 60 kW/m 2 K.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.