This paper describes electrochemical and spectroscopic properties of a well-characterized, synthetically accessible, 1.1 nm diam Au nanoparticle, Au(38)(PhC(2)S)(24), where PhC(2)S is phenylethylthiolate. Properties of other Au(38) nanoparticles made by exchanging the monolayer ligands with different thiolate ligands are also described. Voltammetry of the Au(38) nanoparticles in CH(2)Cl(2) reveals a 1.62 V energy gap between the first one-electron oxidation and the first reduction. Based on a charging energy correction of ca. 0.29 V, the indicated HOMO-LUMO gap energy is ca. 1.33 eV. At low energies, the optical absorbance spectrum includes peaks at 675 nm (1.84 eV) and 770 nm (1.61 eV) and an absorbance edge at ca. 1.33 eV that gives an optical HOMO-LUMO gap energy that is consistent with the electrochemical estimate. The absorbance at lowest energy is bleached upon electrochemical depletion of the HOMO level. The complete voltammetry contains two separated doublets of oxidation waves, indicating two distinct molecular orbitals, and two reduction steps. The ligand-exchanged nanoparticle Au(38)(PEG(135)S)(13)(PhC(2)S)(11), where PEG(135)S is -SCH(2)CH(2)OCH(2)CH(2)OCH(3), exhibits a broad (1.77-0.89 eV) near-IR photoluminescence band resolvable into maxima at 902 nm (1.38 eV) and 1025 nm (1.2 eV). Much of the photoluminescence occurs at energies less than the HOMO-LUMO gap energy. A working model of the energy level structure of the Au(38) nanoparticle is presented.

The synthesis and characterization of phenylethanethiolate-coated monolayer protected clusters (MPCs) with Au140 (average) and Au38 cores are described. The latter 1.1 nm core diameter nanoparticles, whose Au38(PhC2S)24 composition was analytically established, are stable and isolable in relatively high purity and ∼200 mg quantities per reaction batch. Chemical shift effects in 1 H and 13 C NMR spectra reveal the existence of either closely related Au38 structures or differences between ligands on a given structure, or both. The Au38(PhC2S)24 MPCs undergo place exchange reactions with other thiolate ligands and, owing to their stability and ease of production, provide a gateway to other Au38 MPCs with partially or completely different monolayer compositions.

The synthesis and characterization of a new nitric oxide (NO)-releasing scaffold prepared from amine-functionalized silica nanoparticles are reported. Inorganic-organic hybrid silica was prepared via cocondensation of tetraethoxy- or tetramethoxysilane (TEOS or TMOS) and aminoalkoxysilane with appropriate amounts of ethanol (or methanol), water, and ammonia. The amine functional groups in the silica were converted to N-diazeniumdiolate NO donors via exposure to high pressures of NO (5 atm) under basic conditions. Control over both the structure and concentration of the silane precursors (i.e., tetraalkoxy- and aminoalkoxysilanes) and specific synthetic conditions allowed for the preparation of NO donor silica particles of widely varying sizes (d = 20-500 nm), NO payloads (50-1780 nmol.mg-1), maximum amounts of NO released (10-5500 ppb.mg-1), half-lives (0.1-12 h), and NO release durations (up to 30 h). The silica nanoparticles were characterized by solid-state 29Si nuclear magnetic resonance (NMR), atomic force microscopy (AFM), elemental analysis, and gas adsorption-desorption isotherms. The advantages of silica-derived NO storage/delivery systems over previously reported macromolecular NO donors include the ability to (1) store large quantities of NO, (2) modulate NO release kinetics, and (3) readily tune particle size based on the composition of the particle. In addition, a one-pot strategy for preparing the NO donor silica allows for straightforward, high-throughput synthesis and purification.

The preparation and properties of a series of gold nanoclusters protected by thiolated peptides based on the alpha-aminoisobutyric acid (Aib) unit are described. The peptides were devised to form 0-3 C=O...H-N intramolecular hydrogen bonds, as required by their 3(10)-helical structure. The monolayer-protected clusters (MPCs) were prepared, using a modified version of the two-phase Brust-Schiffrin preparation, and fully characterized with (1)H NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The MPCs were obtained with core diameters in the range of 1.1-2.3 nm, depending on the reaction conditions. Structured peptides formed smaller clusters. The smallest MPC obtained is in agreement with the average formula Au(38)Pep(18). The results showed that the chemical integrity of the peptide is maintained upon monolayer formation and that the average number of peptide ligands per gold cluster is typically 75-85% the value calculated for alkanethiolate MPCs of similar sizes. The IR and NMR spectra indicated that in the monolayer the peptides are involved in both intra- and interligand C=O...H-N hydrogen bonds.

The kinetics of exchange ofphenylethanethiolate ligands (PhC2S) of monolayer-protected clusters (MPCs, average formula Au140(PhC2S)53) by para-substituted arylthiols (p-X-ArSH) are described. 1H NMR measurements of thiol concentrations show that the exchange reaction is initially rapid and gradually slows almost to a standstill. The most labile ligands, exchanging at the shortest reaction times, are thought to be those at defect sites (edges, vertexes) on the nanoparticle core surface. The pseudo-first-order rate constants derived from the first 10% of the exchange reaction profile vary linearly with in-coming arylthiol concentration, meaning that the labile ligands exchange in a second-order process, which is consistent with ligand exchange being an associative process. A linear Hammett relationship with slope p = 0.44 demonstrates a substituent effect in the ligand place exchange reaction, in which the bimolecular rate constants increase for ligands with electron-withdrawing substituents (1.4 x 10-2 and 3.8 x 10(-3) M(-1) s(-1) for X = NO2 and 4-OH, respectively). This is interpreted as the more polar Au-S bonds at the defect sites favoring bonding with more electron deficient sulfur moieties. At longer reaction times, where ligands exchange on nondefect (terrace) as well as defect sites, the extent of ligand exchange is higher for thiols with more electron-donating substituents. The difference between short-time kinetics and longer-time pseudoequilibria is rationalized based on differences in Au-S bonding at defect vs nondefect MPC core sites. The study adds substance to the mechanisms of exchange of protecting ligands on nanoparticles. The scope and limitations of 1H NMR spectroscopy for determining rate data are also discussed.

Nanoparticles of metals (Au, Ag, Pd, alloys) in the size range 1-3 nm diameter can be stabilized against aggregation of the metal particles by coating the metal surface with a dense monolayer of ligands (thiolates). The stabilization makes it possible to analytically define the nanoparticle composition (for example, Au140(hexanethiolate)53, I) and to elaborate the chemical functionality of the protecting monolayer (for example, Au140(C6)35(MUA)18, II, where C6 = hexanethiolate and MUA = mercaptoundecanoic acid). Network polymer films (IIfilm) on interdigitated array electrodes can be prepared from II, based on cation coordination (i.e., Cu2+, Zn2+, Ag+, methyl viologen) by the carboxylates of MUA. The electronic conductivity of the IIfilm network polymer films occurs by electron hopping between the Au140 nanoparticle cores, and offers an avenue for investigation of metal-to-metal nanoparticle electron transfer chemistry. The report begins with a brief summary of what is known about metal nanoparticle electron transfer chemistry. The investigation goes on to assess factors that influence the dynamics of film formation as well as film conductivity, in the interest of better understanding the parameters affecting electron hopping rates in IIfilm network polymer films. Finally, sorption of organic vapors into IIfilm causes a decreased electronic conductivity and increased mass that can be assessed using quartz crystal microbalance measurements. The change in electronic conductivity can be exploited for the sensing of organic vapors.

The concerted dissociative reduction of di-tert-butyl peroxide (DTBP), dicumyl peroxide (DCP), and di-n-butyl peroxide (DNBP) is evaluated by both heterogeneous and homogeneous electron transfer using electrochemical methods. Electrochemical and thermochemical determination of the O-O bond energies and the standard potentials of the alkoxyl radicals allow the standard potentials for dissociative reduction of the three peroxides in N,N-dimethylformamide and acetonitrile to be evaluated. These values allowed the kinetics of homogeneous ET reduction of DTBP and DCP by a variety of radical anion donors to be evaluated as a function of overall driving force. Comparison of the heterogeneous ET kinetics of DTBP and DNBP as a function of driving force for ET allowed the distance dependence on the reduction kinetics of the former to be estimated. Results indicate that the kinetics of ET to DTBP is some 0.8 order of magnitude slower in reactivity than DNBP because of a steric effect imposed by the bulky tert-butyl groups. Experimental activation parameters were measured for the homogeneous reduction of DTBP with five mediators, covering a range of 0.4 eV in driving force over the temperature range -30 to 50°C in DMF. The temperature dependence of the kinetics leads to unusually low preexponential factors for this series. The low preexponential factor is interpreted in terms of a nonadiabatic effect resulting from weak electronic coupling between the reactant and product surfaces. Finally, the data are discussed in the context of recent advances of dissociative electron transfer reported by Savéant and by German and Kuznestov. In total the results suggest that these peroxides undergo a nonadiabatic dissociative electron transfer and represent the first reported class of compounds where this effect is reported.

We report the synthesis of nitric oxide-releasing gold nanoparticles formed by place-exchange reaction of hexanethiol monolayer-protected clusters with diamine nitric oxide donor precursor molecules, which are subsequently converted to N-diazeniumdiolate NO donors. The nitric oxide release from the N-diazeniumdiolate-modified gold nanoparticles is tunable by varying the number and/or the chemical structure of the exchanged amine ligands. The size and stability of NO-releasing nanoparticles may prove useful for a range of biomedical and pharmaceutical applications.