Self-folding microscale origami patterns are demonstrated in polymer films with control over mountain/valley assignments and fold angles using trilayers of photo-crosslinkable copolymers with a temperature-sensitive hydrogel as the middle layer. The characteristic size scale of the folds W = 30 μm and figure of merit A/ W (2) ≈ 5000, demonstrated here represent substantial advances in the fabrication of self-folding origami.

An experimental study was made of the mechanism by which the ultrasonic vibration of liquid surfaces causes atomization. At exciting frequencies in the range of 10 to 800 kc, uniform patterns of crossed capillary waves were found on the liquid surface when atomization occurred. The number-median diameter of the particles produced was found to be a constant fraction, 0.34, of the capillary wavelength; the capillary wavelength is calculable by Kelvin's equation using the exciting frequency and properties of the fluid being atomized. The evidence is strong that the mechanism of ultrasonic atomization involves the rupture of capillary surface waves and the subsequent ejection of the wave peaks from the surface as particles.

Origami is used beyond purely aesthetic pursuits to design responsive and customizable mechanical metamaterials. However, a generalized physical understanding of origami remains elusive, owing to the challenge of determining whether local kinematic constraints are globally compatible and to an incomplete understanding of how the folded sheet's material properties contribute to the overall mechanical response. Here, we show that the traditional square twist, whose crease pattern has zero degrees of freedom (DOF) and therefore should not be foldable, can nevertheless be folded by accessing bending deformations that are not explicit in the crease pattern. These hidden bending DOF are separated from the crease DOF by an energy gap that gives rise to a geometrically driven critical bifurcation between mono- and bistability. Noting its potential utility for fabricating mechanical switches, we use a temperature-responsive polymer-gel version of the square twist to demonstrate hysteretic folding dynamics at the sub-millimetre scale.

The purpose of this work is to develop approaches to accommodate thickness in origami-based deployable arrays with a high ratio of deployed-to-stowed diameter. The origami flasher model serves as a basis for demonstrating the approach. A thickness-accommodating mathematical model is developed to describe the flasher. Practical modifications are presented for the creation of physical models and two options are proposed: allowing the panels to fold along their diagonals or applying a membrane backing with specified widths at fold-lines. The mathematical model and hardware modifications are employed to create several physical models. The results are general and apply to a range of applications. An example is provided by the application that motivated the work: a deployable solar array for space applications. The model is demonstrated in hardware as a 1/20th scale prototype with a ratio of deployed-to-stowed diameter of 9.2 (or 1.25 m deployed outer diameter to 0.136 m stowed outer diameter).