For some twenty years the marine coatings industry has been intrigued by polymer surfaces with low adhesion to other materials, especially to the biological glues used by marine organisms. Polymers with fouling release surfaces have been made from sundry materials, and their resistance to marine fouling in both static and dynamic tests has been evaluated in the world's oceans. Although the polymer surface property most frequently correlated with bioadhesion is its critical surface tension (γ(?)), resistance to fouling is also influenced by other bulk and surface properties of the polymer. This paper reviews the types of bonding associated with polymeric materials used in fouling resistant coatings, describes the removal process in terms of fracture mechanics, and discusses the importance of surface energy, elastic modulus and coating thickness in the release of biofoulants.

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.

No abstract

No abstract