No abstract

No abstract

No abstract

The application of renewable nanomaterials, like nanocrystalline cellulose (NCC), has recently been widely studied by many researchers. NCC has many benefits such as high aspect ratio, biodegradability, and high number of hydroxyl groups which offer great opportunities for modification. In this study, the NCC derived from empty fruit bunches (EFB) was modified with aminosilane, 3-(2-aminoethylamino)propyl-dimethoxymethylsilane (AEAPDMS), and the characterization was performed to investigate the potential as carbon dioxide (CO2) capture. Modification of NCC with AEAPDMS was carried out in water/ethanol solvent (80/20) (v/v) with a ratio of NCC to aminosilane of 1 : 1, 1 : 2, 1 : 3, and 1 : 4 w/w%. The effects of AEAPDMS on NCC were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD) analysis, elemental analysis (CHNS), and transmission electron microscopy (TEM). The existence of AEAPDMS onto NCC was confirmed by ATR-FTIR spectroscopy as the new peaks of NH2were bending and wagging, and Si-CH3appeared. The thermal stability of NCC increased after modification due to the interaction with AEAPDMS. The elemental analysis result showed that the nitrogen content increased with an enhancement ratio of the modifiers. The XRD indicated that the crystallinity decreased while the rod-like geometry of NCC was maintained after amorphous AEAPDMS grafted on the NCC. Since AEAPDMS can be grafted on the NCC, the sample is applicable as CO2capture.

No abstract

Flexible and porous epoxidised natural rubber (ENR)/polyvinyl chloride (PVC) membranes were prepared via phase inversion technique. The pore formation on ENR/PVC membranes was initiated with the introduction of inorganic particles (silica). Two types of silica, microsilica (microcrystalline silica powder) and nanosilica [generated from Tetraethoxysilane (TEOS)] were used. Effects of silica addition on the membrane structure are investigated by means of FTIR, SEM, TGA, and UTM. FTIR results showed the presence of signature peak of SiAOASi at 1102 and 1088 cm À1 for ENR/PVC/SiO 2 and ENR/PVC/TEOS membrane, respectively. Morphological studies showed that pores developed in ENR/PVC/TEOS membranes were more homogenous as compared to ENR/ PVC/SiO 2 membranes. Thermal and mechanical stability of the membranes improved with the incorporation of silica. ENR/PVC/SiO 2 membrane exhibited better mechanical and thermal properties as compared to ENR/PVC/TEOS membranes. CO 2 and N 2 gas permeation of silica-filled membranes increased with increasing silica content and the permeability of ENR/PVC/SiO 2 membrane toward N 2 and CO 2 gasses was higher than ENR/PVC/TEOS membrane.

No abstract

No abstract