Magnetic pulse welding is a solid-state joining technology, based on the use of electromagnetic forces to deform and to weld workpieces. Since no external heat sources are used during the magnetic pulse welding process, it offers important advantages for the joining of dissimilar material combinations. Although magnetic pulse welding has emerged as a novel technique to join metallic tubes, the dimensional consistency of the joint assembly due to the strong impact of the flyer tube onto the target tube and the resulting plastic deformation is a major concern. Often, an internal support inside the target tube is considered as a solution to improve the stiffness of the joint assembly. A detailed investigation of magnetic pulse welding of Cu-DHP flyer tubes and 11SMnPb30 steel target tubes is performed, with and without an internal support inside the target tubes, and using a range of experimental conditions. The influence of the key process conditions on the evolution of the joint between the tubes with progress in time has been determined using experimental investigations and numerical modelling. As the process is extremely fast, real-time monitoring of the process conditions and evolution of important responses such as impact velocity and angle, and collision velocity, which determine the formation of a metallic bond, is impossible. Therefore, an integrated approach using a computational model using a finite-element method is developed to predict the progress of the impact of the flyer onto the target, the resulting flyer impact velocity and angle, the collision velocity between the flyer and the target, and the evolution of the welded joint, which are usually impossible to measure using experimental observations.
Magnetic pulse welding (MPW) provides an efficient route to join overlapping metallic tubes by the application of a high magnitude electromagnetic (EM) force. The process is rapidly transient in nature with little scope to comprehend and monitor the evolution of the joint by experimental means. A comprehensive computational process model is presented here to analyse the transient nature of EM field and force, and resulting impact and plastic deformation during MPW of metallic tubes. The computed results are validated with the corresponding experimentally measured weld joint length for specific tube joint geometries. The computed values of the plastic deformation, impact angle and impact velocity along the joint interface are examined further to realise the progressive nature of the joint formation.
Magnetic pulse welding involves the joining of two metallic parts in a solid state by the use of a short and intense electromagnetic impulses and the resulting impact between the parts. The coalesced interface undergoes visco-plastic deformation at a high strain rate and exhibits a wavy shape at a microscopic scale. A practical estimation of the electromagnetic pressure, impact velocity and welded joint length as a function of the process conditions and the electromagnetic coil geometry is required but currently not available. Three novel analytical relations for the estimation of the electromagnetic pressure, impact velocity, and welded joint length for magnetic pulse welding of tubes and sheets, are presented. These relations were developed systematically, following a dimensional analysis, and validated for a wide range of conditions from independent literature. The comparison of the analytically computed results and the corresponding values reported in the literature has illustrated that the proposed analytical relations can be used for the estimation of the electromagnetic pressure and impact velocity for the magnetic pulse welding of tubes and sheets with a good level of confidence. The analytically calculated results for the welded joint length show a little discrepancy with the corresponding experimentally measured values. Further investigations and more experimentally measured results are required to arrive at a more comprehensive analytical relation for the prediction of welded joint length.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.