Although lithium–sulfur (Li–S) batteries are one of the most promising energy storage devices owing to their high energy densities, the sluggish reaction kinetics and severe shuttle effect of the sulfur cathodes hinder their practical applications. Here, single atom zinc implanted MXene is introduced into a sulfur cathode, which can not only catalyze the conversion reactions of polysulfides by decreasing the energy barriers from Li2S4 to Li2S2/Li2S but also achieve strong interaction with polysulfides due to the high electronegativity of atomic zinc on MXene. Moreover, it is found that the homogenously dispersed zinc atoms can also accelerate the nucleation of Li2S2/Li2S on MXene layers during the redox reactions. As a result, the sulfur cathode with single atom zinc implanted MXene exhibits a high reversible capacity of 1136 mAh g−1. After electrode optimization, a high areal capacity of 5.3 mAh cm−2, high rate capability of 640 mAh g−1 at 6 C, and good cycle stability (80% capacity retention after 200 cycles at 4 C) can be achieved.
The active sites of Fe–N–C catalysts are nitrogen coordinated iron atoms, FeNx(x = 1–5), that have five possible coordination numbers, corresponding to different ORR activities and PEMFC performances.
Single atom catalysts possess attractive electrocatalytic activities for various chemical reactions owing to their favorable geometric and electronic structures compared to the bulk counterparts. Herein, we demonstrate an efficient approach to producing single atom copper immobilized MXene for electrocatalytic CO 2 reduction to methanol via selective etching of hybrid A layers (Al and Cu) in quaternary MAX phases (Ti 3 (Al 1−x Cu x )C 2 ) due to the different saturated vapor pressures of Al-and Cu-containing products. After selective etching of Al in the hybrid A layers, Cu atoms are wellpreserved and simultaneously immobilized onto the resultant MXene with dominant surface functional group (Cl x ) on the outmost Ti layers (denoted as Ti 3 C 2 Cl x ) via Cu−O bonds. Consequently, the as-prepared single atom Cu catalyst exhibits a high Faradaic efficiency value of 59.1% to produce CH 3 OH and shows good electrocatalytic stability. On the basis of synchrotron-based X-ray absorption spectroscopy analysis and density functional theory calculations, the single atom Cu with unsaturated electronic structure (Cu δ+ , 0 < δ < 2) delivers a low energy barrier for the rate-determining step (conversion of HCOOH* to absorbed CHO* intermediate), which is responsible for the efficient electrocatalytic CO 2 reduction to CH 3 OH.
High‐entropy materials (HEMs) have great potential for energy storage and conversion due to their diverse compositions, and unexpected physical and chemical features. However, high‐entropy atomic layers with fully exposed active sites are difficult to synthesize since their phases are easily segregated. Here, it is demonstrated that high‐entropy atomic layers of transition‐metal carbide (HE‐MXene) can be produced via the selective etching of novel high‐entropy MAX (also termed Mn+1AXn (n = 1, 2, 3), where M represents an early transition‐metal element, A is an element mainly from groups 13–16, and X stands for C and/or N) phase (HE‐MAX) (Ti1/5V1/5Zr1/5Nb1/5Ta1/5)2AlC, in which the five transition‐metal species are homogeneously dispersed into one MX slab due to their solid‐solution feature, giving rise to a stable transition‐metal carbide in the atomic layers owing to the high molar configurational entropy and correspondingly low Gibbs free energy. Additionally, the resultant high‐entropy MXene with distinct lattice distortions leads to high mechanical strain into the atomic layers. Moreover, the mechanical strain can efficiently guide the nucleation and uniform growth of dendrite‐free lithium on HE‐MXene, achieving a long cycling stability of up to 1200 h and good deep stripping–plating levels of up to 20 mAh cm−2.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.