Latar belakang masalah penelitian ini yaitu proses pembelajaran yang monoton, kurang melibatkan aktivitas siswa dalam melakukan kerja ilmiah yang mengakibatkan siswa jenuh dan kesulitan dalam memahami pelajaran sehingga hasil belajar siswa rendah. Selain itu, konsepsi awal siswa kurang diperhatikan dalam kegiatan belajar mengajar sehingga seringkali terjadi miskonsepsi pada siswa. Metode diskusi dijadikan solusi untuk mengatasi permasalahan tersebut. Rumusan masalah secara umum dalam penelitian ini adalah bagaimana peningkatan hasil belajar siswa pada konsep cahaya dengan menerapkan metode diskusi. Tujuan umum pada penelitian ini adalah mendeskripsikan peningkatan hasil belajar siswa pada konsep cahaya dengan menerapkan metode diskusi. Penelitian ini memakai metode Penelitian Tindakan Kelas yang terdiri dari tiga siklus. Setiap siklus terdiri dari 4 tahap, yaitu: perencanaan, pelaksanaan tindakan, observasi dan refleksi. Instrumen yang digunakan yaitu pedoman observasi dan tes. Hasil penelitian menunjukkan bahwa penerapan metode diskusi dalam pembelajaran tema 5 materi sifat-sifat cahaya dapat meningkatkan aktivitas siswa dan hasil belajar siswa. Hasil observasi yang terdapat pada lembar observasi menunjukkan bahwa aktivitas siswa meningkat tiap siklusnya. Hasil belajar siswapun meningkat yaitu: pada siklus I rata-rata skor hasil belajar siswa sebesar 67.59 dengan ketuntasan belajar 55,56%, dan siklus II meningkat menjadi 78,22 dengan ketuntasan belajar mencapai 85,19%. Kesimpulan yang didapat adalah aktivitas belajar siswa dan hasil belajar siswa meningkat dengan menerapkan metode diskusi dalam pembelajaran materi sifat-sifat cahaya. Rekomendasi ditujukan untuk kepala sekolah, guru, dan peneliti selanjutnya, guna memberikan motivasi dan perbaikan untuk meningkatkan mutu pendidikan di masa depan.
Central Java is one of the provinces in Indonesia that relies on the agricultural sector. The agricultural centre in the province is located in Cilacap regency. In order to improve agricultural products, adequate facilities and infrastructure are required, one of which is the Jepara Secondary Channel. Channels on the Secondary Channel Jepara majority is no longer worth using. So much agricultural land is less maximal in water utilization. On the Jepara secondary channel, there is no similar cross-section of channels; some use a cross-section of soil, stone, and concrete, and there is cross-sectional damage. In connection with the problem, a cross-sectional planning analysis of secondary channels needs to be conducted. Consider effective rainfall analysis, irrigation needs analysis, and open hydraulic analysis. The results obtained from the analysis should indicate that the discharge flowed by the existing channel (Qs) must be greater than or equal to the planned discharge (Q0). Based on the results, two channels cannot accommodate the discharge of water needs (Q0), namely in section 1 and section 6, so it needs to be redesigned. However, by analyzing cross sections along channels with a varied cross-section shapes. Then planned design for all fields by using alternative four. This is because using a cross-sectional combination of trapezoid and u-ditch 70x80 cm can shorten working time and make construction costs more affordable.
Desa Sonowangi Kecamatan Ampelgading Kabupaten Malang memiliki daerah layanan 3 dusun dengan kondisi topografi yang berbukit-bukit, dimana posisi mata air lebih rendah dari posisi daerah pemukiman penduduk. Tempat penampungan air bersih atau dikenal dengan reservoar pada sistem penyediaan air bersih umumnya diperlukan untuk melayani kebutuhan desa/daerah layanan tersebut. Reservoar merupakan bangunan yang fungsinya sebagai tempat untuk penampungan air guna disalurkan ke pipa distribusi menuju rumah-rumah warga. Fungsi utama bangunan ini adalah untuk menyeimbangkan antara debit produksi dan debit pemakaian air bersih. Selain itu juga untuk menambah tekanan dan mengatur tekanan air. Reservoar di Desa Sonowangi terletak di atas bukit serta diketahui tidak aman stabilitas strukturnya yaitu terhadap sliding/kelongsoran. Sehingga perlu dilakukan redesain atau desain ulang bangunan reservoir ini. Metode redesain bangunan Reservoar Desa Sonowangi ini dilakukan dengan memperhitungkan stabilitas struktur dengan perbaikan struktural Reservoar agar tidak terjadi kasus sliding. Analisis stabilitas lereng di lokasi pekerjaan reservoar dilakukan dengan perhitungan menggunakan Software Geostudio V.12 dan analisis struktur Reservoar dilakukan dengan menggunakan Software SAP 2000. Hasil perhitungan volume reservoir Sonowangi yaitu sebesar 240 m 3 dengan debit yang dialirkan sebesar 4 liter/detik. Hasil analisis redesain bangunan reservoar, didapatkan dimensi reservoar adalah 10m x 6m x 4,15m masing-masing. Dengan ambang bebas minimum 30 cm di atas permukaan air tertinggi dan dasar bak minimum 15 cm dari muka air terendah dengan kedalaman strouss yaitu 4 m dengan jumlah 20 buah dan diameter sebesar 25 cm.
Abstrak Tubuh bendungan merupakan bagian paling penting yang berfungsi sebagai penyangga aliran air dan rembesan. Bendungan urugan tipe zonal harus dianalisis berdasarkan desain zona-zona penyusun tubuh bendungan. Karena besarnya rembesan dan nilai keamanan strabilitas bendungan dipengaruhi oleh besar ketebalan zona-zona tubuh bendungan. Pada penelitian ini bertujuan menganalisa stabilitas tubuh bendungan Banyu terhadap kelongsoran lereng dan rembesan air. . Analisis stabilitas tubuh bendungan menggunakan metode Simplified Bishop dimana akan dibandingkan antara perhitungan manual dengan menggunakan Software Geostudio. Hasil analisis Geoslope menunjukan bahwa bagian hulu bendungan menghasilkan nilai FS 3,021 > 1,50 dan adanya pengaruh gempa menghasilkan FS 1,633 > 1,20. Untuk nilai FS pada rapid draw down hulu bendungan menghasilkan nilai FS 3,234 > 1,30 dan adanya pengaruh gempa menghasilkan FS 1,718 > 1,10. Dengan demikian bendungan dinyatakan aman kestabilannya pada kondisi setelah selesai konstruksi (tanpa genangan air), muka air normal, muka air banjir, rapid draw down dan adanya pengaruh gempa pada Y/H: 0,25; 0,50; 0,75; 1,00. Kata-kata Kunci: Gempa, tanah lempung, analisis stabilitas slope/W, metode bishop, goestudio Abstract The body of the dam is the most important part that serves as a buffer for water flow and seepage. Zonal type urugan dams should be analyzed based on the design of the constituent zones of the dam body. Due to the magnitude of seepage and the safety value of the dam's strability, it is influenced by the thickness of the dam body zones. This study aims to analyze the stability of the Banyu dam body against slope landslides and water seepage. . Analysis of the stability of the dam body using the Simplified Bishop method which will be compared between manual calculations using Geostudio Software. The results of Geoslope analysis showed that the upstream part of the dam produced FS values of 3.021 > 1.50 and the influence of the earthquake produced FS 1.633 > 1.20. For the FS value in the rapid draw down upstream of the dam produced an FS value of 3.234 > 1.30 and the influence of the earthquake resulted in FS 1.718 > 1.10. Thus the dam is declared safe stability in conditions after completion of construction (without waterlogging), normal water level, flood water level, rapid draw down and the influence of earthquakes on Y/H: 0.25; 0,50; 0,75; 1,00. Keywords: Earthquake, clay, slope/W stability analysis, bishop method, goestudio.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.