X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope (VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting in three arms with optimized optics, coatings, dispersive elements and detectors. It operates at intermediate spectral resolution (R ∼ 4000−17 000, depending on wavelength and slit width) with fixed échelle spectral format (prism cross-dispersers) in the three arms. It includes a 1.8 × 4 integral field unit as an alternative to the 11 long slits. A dedicated data reduction package delivers fully calibrated two-dimensional and extracted spectra over the full wavelength range. We describe the main characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations.

We present an overview of and status report on the WEAVE next-generation spectroscopy facility for the William Herschel Telescope (WHT). WEAVE principally targets optical ground-based follow up of upcoming ground-based (LOFAR) and space-based (Gaia) surveys. WEAVE is a multi-object and multi-IFU facility utilizing a new 2-degree prime focus field of view at the WHT, with a buffered pick-and-place positioner system hosting 1000 multi-object (MOS) fibres, 20 integral field units, or a single large IFU for each observation. The fibres are fed to a single spectrograph, with a pair of 8k(spectral) x 6k (spatial) pixel cameras, located within the WHT GHRIL enclosure on the telescope Nasmyth platform, supporting observations at R~5000 over the full 370-1000nm wavelength range in a single exposure, or a high resolution mode with limited coverage in each arm at R~20000. The project is now in the final design and early procurement phase, with commissioning at the telescope expected in 2017.

We present the Spectropolarimeter for Planetary EXploration (SPEX), a high-accuracy linear spectropolarimeter measuring from 400 to 800 nm (with 2 nm intensity resolution), that is compact (∼ 1 liter), robust and lightweight. This is achieved by employing the unconventional spectral polarization modulation technique, optimized for linear polarimetry. The polarization modulator consists of an achromatic quarter-wave retarder and a multiple-order retarder, followed by a polarizing beamsplitter, such that the incoming polarization state is encoded as a sinusoidal modulation in the intensity spectrum, where the amplitude scales with the degree of linear polarization, and the phase is determined by the angle of linear polarization. An optimized combination of birefringent crystals creates an athermal multiple-order retarder, with a uniform retardance across the field of view. Based on these specifications, SPEX is an ideal, passive remote sensing instrument for characterizing planetary atmospheres from an orbiting, air-borne or ground-based platform. By measuring the intensity and polarization spectra of sunlight that is scattered in the planetary atmosphere as a function of the single scattering angle, aerosol microphysical properties (size, shape, composition), vertical distribution and optical thickness can be derived. Such information is essential to fully understand the climate of a planet. A functional SPEX prototype has been developed and calibrated, showing excellent agreement with end-to-end performance simulations. Calibration tests show that the precision of the polarization measurements is at least 2 · 10 −4 . We performed multi-angle spectropolarimetric measurements of the Earth's atmosphere from the ground in conjunction with one of AERONET's sun photometers. Several applications exist for SPEX throughout the solar system, a.o. in orbit around Mars, Jupiter and the Earth, and SPEX can also be part of a ground-based aerosol monitoring network.

No abstract

We present SPEX, the Spectropolarimeter for Planetary Exploration, which is a compact, robust and low-mass spectropolarimeter designed to operate from an orbiting or in situ platform. Its purpose is to simultaneously measure the radiance and the state (degree and angle) of linear polarization of sunlight that has been scattered in a planetary atmosphere and/or reflected by a planetary surface with high accuracy. The degree of linear polarization is extremely sensitive to the microphysical properties of atmospheric or surface particles (such as size, shape, and composition), and to the vertical distribution of atmospheric particles, such as cloud top altitudes. Measurements as those performed by SPEX are therefore crucial and often the only tool for disentangling the many parameters that describe planetary atmospheres and surfaces. SPEX uses a novel, passive method for its radiance and polarization observations that is based on a carefully selected combination of polarization optics. This method, called spectral modulation, is the modulation of the radiance spectrum in both amplitude and phase by the degree and angle of linear polarization, respectively. The polarization optics consists of an achromatic quarter-wave retarder, an athermal multiple-order retarder, and a polarizing beam splitter. We will show first results obtained with the recently developed prototype of the SPEX instrument, and present a performance analysis based on a dedicated vector radiative transport model together with a recently developed SPEX instrument simulator.

No abstract

We present a description of a new instrument development, HARPS3, planned to be installed on an upgraded and roboticized Isaac Newton Telescope by end-2018. HARPS3 will be a high resolution (R 115,000) echelle spectrograph with a wavelength range from 380-690 nm. It is being built as part of the Terra Hunting Experiment -a future 10 year radial velocity measurement programme to discover Earth-like exoplanets. The instrument design is based on the successful HARPS spectrograph on the 3.6m ESO telescope and HARPS-N on the TNG telescope. The main changes to the design in HARPS3 will be: a customised fibre adapter at the Cassegrain focus providing a stabilised beam feed and on-sky fibre diameter ≈ 1.4 arcsec, the implementation of a new continuous flow cryostat to keep the CCD temperature very stable, detailed characterisation of the HARPS3 CCD to map the effective pixel positions and thus provide an improved accuracy wavelength solution, an optimised integrated polarimeter and the instrument integrated into a robotic operation. The robotic operation will optimise our programme which requires our target stars to be measured on a nightly basis. We present an overview of the entire project, including a description of our anticipated robotic operation.

Context. A complex environment exists in the inner few astronomical units of planet-forming disks. High-angular-resolution observations play a key role in our understanding of the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296 from early VLTI/MATISSE observations taken in the L- and N-bands. We put special emphasis on the detection of potential disk asymmetries. Methods. We use simple geometric models to fit the interferometric visibilities and closure phases. Our models include a smoothed ring, a flat disk with an inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydrodynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is 3.5 ± 0.2. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the r < 0.3 au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. To find the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large-scale vortex may be compatible with our data. The half-light radius of the L-band-emitting region is 0.33 ±0.01 au, the inclination is 52°−7°+5°, and the position angle is 143° ± 3°. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for μm-sized grains. Refractory grains or large (≳10 μm-sized) grains could be the origin of this emission. N-band observations may also support a lack of small silicate grains in the innermost disk (r ≲ 0.6 au), in agreement with our findings from L-band data.