O presente trabalho teve por objetivo caracterizar um lote de madeira de eucalipto comercializada por uma empresa do setor florestal brasileiro. Utilizou-se, neste trabalho, a madeira de Eucalyptus, provavelmente E. grandis W. Hill ex Maiden., adquirida no mercado local e no estado de secada ao ar. Todo o lote foi dividido em dois sublotes, um de madeira mais pesada e outro da mais leve, porque se percebeu, no recebimento do carregamento, que havia nele tábuas com diferenças notáveis de peso. Os corpos-de-prova foram preparados a partir de tábuas retiradas ao acaso de cada um desses dois sublotes. Fez-se, portanto, a caracterização dessa madeira para possíveis comparações dos valores de suas propriedades físicas e mecânicas, segundo a norma NBR 7190 (1997). Feitos os testes, de fato pôde-se verificar a existência de duas populações de tábuas com propriedades mecânicas significativamente diferentes.
RESUMO -O presente trabalho teve como objetivo avaliar o efeito da extração da madeira de seis espécies, quatro nativas (candeia, cedro, cerejeira e jacarandá-caviúna) e duas exóticas (E. citriodora e E. gumifera), em diferentes solventes, na resistência ao apodrecimento causado pelo fungo da podridão-parda Gloeophyllum trabeum. O material foi ensaiado na forma de serragem, em face da maior facilidade para os procedimentos de extração. Dentre os resultados, pode-se destacar a baixa perda de massa ocorrida na madeira de cedro (Cedrela fissilis), evidenciando sua elevada resistência natural ao fungo testado e, ainda, à incapacidade dos solventes utilizados na retirada de compostos que conferem resistência ao apodrecimento. As madeiras de candeia (Vanillosmopsis erythropappa), cerejeira (Amburana cearensis), jacarandá-caviúna (Machaerium scleroxylon) e de eucaliptos (Corymbia citriodora e Eucalyptus gummifera) também apresentaram elevada resistência natural, em função da baixa perda de massa ocorrida, quando expostas ao fungo G. trabeum. Essas madeiras, quando totalmente extraídas, apresentaram elevados valores de perda de massa. No que diz respeito ao material extraído por diferentes solventes de forma isolada, observou-se, na candeia, que o solvente mais eficiente na retirada de substâncias que conferem resistência ao apodrecimento foi o diclorometano. Com relação ao cedro, o mais eficiente foi o metanol. Na cerejeira, por meio da mistura de etanol/tolueno retiraram-se mais substâncias, ao passo que no jacarandá-caviúna foi o metanol. Nas madeiras de eucaliptos, o metanol foi mais eficiente na retirada de componentes tóxicos ao fungo utilizado neste estudo, devendo destacar ainda, no E. gummifera, a eficiência da água quente na retirada de tais compostos. No C. citriodora, os valores de perda de massa, em razão das extrações em água fria, em água quente, em diclorometano e ao natural (não-extraída), foram muito baixos.Palavras-chave: Extrativos, durabilidade natural, Gloeophyllum trabeum e madeiras. INFLUENCE OF EXTRACTS IN DECAY RESISTANCE OF SIX WOOD SPECIES
RESUMO -Este trabalho objetivou determinar algumas características anatômicas e dimensões de fibras, elementos dos vasos, células do parênquima e dos raios da madeira da Mimosa tenuiflora (Willd.) Poir. Determinaramse, ainda, a fração parede das fibras e o porcentual das fibras, dos vasos, dos raios e das células parenquimatosas, bem como a densidade, rendimento e propriedades do carvão vegetal. Conclui-se que a madeira de Mimosa tenuiflora possui poros predominantemente solitários, geminados e múltiplos em agrupamento radial; poros distribuídos em porosidade difusa uniforme; parênquima axial paratraqueal vasicêntrico, vasicêntrico confluente, aliforme e aliforme confluente; raios multisseriados, bisseriados e, menos freqüentemente, unisseriados; e fibras de parede espessa e muito curtas. Obteve-se um rendimento de 39,68% em carvão vegetal, com teor de carbono fixo de 71,70%, densidade igual a 0,51g/cm 3 , carbono fixo de 71,79 e poder calórico de 6.866 cal/g. Palavras-chave: Jurema-preta, qualidade da madeira, características anatômicas e propriedades do carvão vegetal. ANATOMICAL STRUCTURE AND CHARCOAL QUALITY OF Mimosa tenuiflora (Willd.) Poir. WOODABSTRACT -The objective of this work was to determine anatomical characteristics, and dimensions of fibers, vessels and parenchyma and ray cells of Mimosa tenuiflora (Willd.) Poir wood. Fibers wall fraction, the percentage of fibers, vessels and ray and parenchyma cells, as well as density and charcoal production and properties were determined. The wood of Mimosa teniflora presents predominantly solitary, geminated and multiple porous in radial groups; porous distributed in uniform diffuse porosity; axial parenchyma paratracheal vasicentric, confluent vasicentric, aliform and confluent aliform; multiseriate, biseiat rays and, less frequently, uniseriate ones; very short fibers with thick walls. Charcoal yield was 39.68% with a 0.51g/cm 3 density, 71.79% carbon content and 6886cal/g calorific value.
O objetivo deste trabalho foi determinar o rendimento em madeira serrada, bem como a massa específica, contração volumétrica, resistência à flexão estática, resistência à compressão paralela, qualidade da linha de cola e trabalhabilidade das madeiras de Eucalyptus grandis, Eucalyptus saligna e Pinus elliottii. Foram colhidas três árvores de cada uma destas espécies, com idades aproximadas de 50, 40 e 40 anos, respectivamente. De cada árvore foram retiradas três toras, sendo uma na base, uma no meio e uma no topo do fuste. Foram analisadas as variações em algumas propriedades, no sentido medula-casca e no sentido longitudinal. Os resultados mostraram que todas as propriedades físicas e mecânicas variaram dentro da árvore nos sentidos radial e longitudinal. A densidade básica e as resistências à flexão e à compressão aumentaram na direção medula-casca, enquanto a contração volumétrica diminuiu. Portanto, para obtenção de madeiras mais densas, mais estáveis e com maior resistência à flexão e à compressão, é necessária a colheita de árvores mais velhas. Observou-se ainda que as toras da porção média do fuste, de modo geral, apresentaram menores valores para todas as propriedades determinadas do que as da base e do topo. A resistência da linha de cola e a porcentagem de falha na madeira para madeira juvenil e adulta apresentaram pouca diferença em todas as posições no fuste. No ensaio de confecção de espiga e furação para espiga, todas as espécies apresentaram resultados satisfatórios, sem ocorrência de defeitos.
RESUMO -Este trabalho teve como objetivo determinar as propriedades de chapas fabricadas com partículas de madeira de paricá (Schyzolobium amazonicum Huber ex. Ducke), às quais foram adicionadas diferentes proporções de fibras de coco (Cocos nucifera L.). As chapas foram fabricadas com 6 ou 8% de adesivo, à base de ureia-formaldeído e tendo como meta uma massa específica de 360 kg/m 3 . Observou-se que a adição de fibras de coco não afetou a estabilidade dimensional, higroscopicidade e absorção de água, porém aumentou significativamente as demais propriedades. As chapas fabricadas com 8% de adesivo foram mais estáveis e mais resistentes do que aquelas feitas com 6% de adesivo.Palavras-chave: Aglomerado, Propriedades, Paricá e Fibra de coco. ABSTRACT -This work had as its objective to determine the properties of particleboards fabricated with paricá particles (Schyzolobium amazonicum Huber ex. Ducke), with increasing proportions of coconut fibers (Coconuts nucifera L.). Boards were fabricated with
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.