Urea is the most common source of nitrogen fertilizer, but it has serious disadvantages with respect to volatilization and leaching; these can be controlled by polymeric coatings on the granules. However, the effectiveness of this strategy depends on the formed polymer presenting good adhesion, reactivity with the urea surface, uniformity, and efficient release kinetics control. Therefore, in this study, we evaluated the release kinetics of urea coated by polyurethane produced from two oils (soybean and castor) by analyzing the influence of the thickness, coating stability, deposition interface, and total release time. The results demonstrate that castor oil produced superior materials, which achieved a total release time in water immersion of over 40 days with a total coating mass of less than 4% of the total mass. The good interface suggested that this material may produce coatings of good quality and long release times with minimum thickness, and this will maximize the total nitrogen present in the granule. V C 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43790.
The coating of fertilizers with polymers is an acknowledged strategy for controlling the release of nutrients and their availability in soil. However, its effectiveness in the case of soluble phosphate fertilizers is still uncertain, and information is lacking concerning the chemical properties and structures of such coatings. Here, an oil-based hydrophobic polymer system (polyurethane) is proposed for the control of the release of phosphorus from diammonium phosphate (DAP) granules. This material was systematically characterized, with evaluation of the delivery mechanism and the availability of phosphate in an acid soil. The results indicated that thicker coatings can change the maximum nutrient availability toward longer periods, such as 4.5-7.5 wt % DAP coated, that presented the highest concentrations at 336 h, as compared to 168 h for uncoated DAP. In contrast, DAP treated with 9.0 wt % began to increase the concentration after 168 h until it results in maximum release at 672 h. These effects could be attributed to the homogeneity of the polymer and the porosity. The strategy successfully provided long-term availability of a phosphate source.
Polymer coatings are used to control the rate of release of plant available nutrients from fertilizers as well as to reduce nutrient losses such as ammonia (NH 3) volatilization. Although the literature presents several examples of materials used to coat urea, little is known about nitrogen (N) release properties such as the mechanism involved and phenomena (e.g., pore opening) in the polymer coating. Thus, this study investigated urea release from polyurethane (PU) derived from two renewable raw materials (castor oil and soybean oil), to explain how the oil structure and coating microstructure influence release and urea-N dynamics in soil. The results demonstrated that the profile of urea release and the urea-N mineralization in the soil could be controlled by altering the thickness of the coating on the urea granules. Coating by eco-friendly polymer was efficient in controlling urea release in soil to reduce volatilization of ammonia and increase the availability of N in the soil.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.