ResumoAs atividades de colheita de madeira apresentam diversas variáveis que influenciam na produtividade das máquinas que irão realizar as operações de corte, extração, desgalhamento, descascamento, sortimento e carregamento. Este trabalho teve como objetivo identificar e sugerir uma classificação para as principais variáveis físicas do terreno, do povoamento e do planejamento das operações que influenciam nas operações de colheita. Classificar as principais máquinas-base utilizadas nas atividades de colheita de madeira no Brasil e iniciar uma discussão técnica sobre as correlações entre essas variáveis e a produtividade das máquinas-base e implementos de operação. Como resultados, foram encontradas 37 variáveis principais que influenciam na produtividade de 10 diferentes tipos de máquinas que podem interagir em 17 atividades diferentes ao realizar as 5 operações básicas de colheita. Palavras-chave: Colheita de madeira; variáveis; produtividade. Abstract Analysis of main variables on productivity of wood harvesting machines in function of land physicaland stand characteristics and forest operation planning. The activities of wood harvesting present several variables that influence the productivity of machines used for felling, extraction, de-branching , de-barking, sorting and loading operations. This work had as objectives to identify and to suggest a classification for the main physical variables of the land, of the stand and forests operation planning that influence harvesting operations, to classify the main base-machines used in Brazil, and to begin a technical discussion about the correlations of these variables with the base-machines and operation implements productivities. As results, they were found 37 main variables that influence the productivity of 10 different types of machines that accomplishing the 5 basic operations of wood harvesting can interact in 17 different activities. Keywords: Wood harvesting; productivity; variables. INTRODUÇÃOA produtividade das operações de colheita de madeira é uma das principais variáveis de viabilidade de retirada de madeira dos projetos florestais, sendo, normalmente, inversamente proporcional ao custo por m 3 produzido e diretamente influenciada pelas variáveis do terreno, do povoamento e do planejamento feito pelos técnicos e exigidos pelas fontes consumidoras.Uma adequada predição da produtividade é de suma importância para que sejam realizados orçamentos adequados para as atividades de colheita de madeira nas empresas, bem como estudos para a viabilização de novos sistemas a serem implantados e dimensionamento das máquinas que serão alocadas para cada projeto.
RESUMO -Este trabalho apresenta um estudo de caso que objetiva avaliar economicamente três sistemas produtivos de carvão vegetal: fornos tradicionais tipo rabo quente, fornos retangulares em alvenaria e fornos cilíndricos metálicos. A empresa estudada já opera utilizando fornos rabo quente e deseja analisar se é mais viável manter seu sistema atual, ou se é melhor optar por um dos dois sistemas alternativos. Para avaliação econômica, utilizaram-se os métodos Valor Presente Líquido (VPL), Valor Anual Uniforme Equivalente (VAUE), Taxa Interna de Retorno (TIR), Taxa de Retorno Incremental (TRI), Benefício/Custo (B/C) e Pay Back. Verificouse que o sistema produtivo mais viável foi o de fornos cilíndricos metálicos. Esse sistema produtivo, apesar do alto custo com eletricidade e investimento inicial, apresentou redução de custos operacionais devido ao aumento no rendimento do processo de carbonização.Palavras-chave: Carvão vegetal; Engenharia econômica; Processos carvoeiros. ECONOMIC FEASIBILITY STUDY OF THREE CHARCOAL PRODUCTION SYSTEMS USING DIFFERENT METHODS ABSTRACT -The present paper shows a case study to evaluate the economic viability of three charcoal production systems: traditional "hot tail" kilns, rectangular brick kilns and cylindrical metallic kilns. The company analyzed already operates using "hot tail" kilns and aims to check if it is more feasible to keep its current
ResumoEsta pesquisa constituiu-se de uma análise da atividade florestal em pequenas propriedades rurais no município de São José dos Pinhais (PR), propondo a implantação de essências florestais nas áreas limítrofes dessas propriedades. Procedeu-se a uma avaliação econômica envolvendo as espécies bracatinga, erva-mate, eucalipto e pinus, visando o plantio nas bordaduras das propriedades. Realizou-se um planejamento para um ciclo de 21 anos para todas as espécies, com o objetivo de comparar o retorno econômico da atividade. Para análise econômica das culturas, utilizaram-se os critérios do Valor Presente Líquido (VPL), da Razão Benefício/Custo (RB/C) e da Taxa Interna de Retorno (TIR). Os resultados obtidos mostram que predominam no município propriedades com dimensões entre 0,1 e 15 ha e que a erva-mate é a cultura de melhor desempenho econômico para o plantio nas áreas limítrofes, seguida do pinus. Palavras-chave: Pequenas propriedades; áreas de bordaduras; essências florestais. AbstractEconomic viability of reforestations in bordering areas in small properties in the county of São José dos Pinhais-PR. The main subject of this work was to evaluate the actual woodland situation of the rural small properties located in São José dos Pinhais district in order to suggest economics suitable trees species for implementation on their boundaries. Some species as bracatinga, erva-mate, eucalypt and pines had an economic evaluation in order to decide about its application on the properties boundaries. At 21 years life cycle planning was developed to find out each economic return rate. The economic analysis was performed by the Net Present Value (NPV), the Benefit/Cost Rate, and the Internal Return Rate (IRR) criteria. The results gained shown that: properties size range is from 0,1 to 15 ha and Erva-mate cultivation presented the best economic option for the boundaries application followed by pines culture. Keywords: rural properties; boundaries areas; forest essences. INTRODUÇÃOA expansão e modernização da agricultura brasileira, apesar de contribuírem significativamente para o aumento da produção e da produtividade agrícola e pecuária, provocaram grande redução da cobertura florestal e diminuição da oferta de produtos florestais, causando alterações no funcionamento dos ecossistemas naturais, especialmente no que se refere ao desequilíbrio no regime das águas e do clima.A sociedade brasileira necessita cada vez mais de soluções que permitam a expansão da produção agrícola e de produtos florestais, associados à preservação ambiental, além de alternativas de emprego e renda, particularmente para os pequenos e médios produtores rurais (RODIGHERI, 1997). Diante desse panorama, torna-se importante a adoção de medidas que assegurem o aumento da oferta de FLORESTA, Curitiba, PR, v. 36, n. 2, mai./ago. 2006. Malinovski, R. A. et al. 262 produtos agrícolas e florestais, acompanhadas da conservação e recuperação dos solos, da despoluição da água e da preservação da floresta nativa remanescente. Um dos principais problemas en...
-The productivity of Eucalyptus at plantations is increasing and has undergone a variety of research studies. Most research is dealing with simple dendrometric variables like the DBH (diameter at breast height) and tree height, or more complex variables including crown parameters or variables concerning photosynthesis. The root systems, however, have not been well analyzed yet. The objective of the study was to analyze the root system with a non-destructive method and to evaluate possible correlations with dendrometric variables of the tree (DBH, height, crown expansion). A small experimental plantation with 39 even-aged, 6-yearold trees of Eucalyptus grandis x urophylla has been investigated within this study. The results of the study show the highest correlation of the root areas with the crown expansion. In general, the root area shows a significantly bigger expansion in the eucalypt plantation than the tree crown, with a more homogeneous development.
No abstract
. (2013). Ergonomic aspects and productivity of different pruning tools for a first pruning lift of Eucalyptus grandis Hill ex Maiden. Silva Fennica vol. 47 no. 4 article id 1026. 14 p. Highlights• Pruning of hardwoods coming from forest plantations is becoming more and more important in Brazil to replace scarce wood from tropical forests.• Evaluating productivity of different pruning tools is essential for the economic output of plantations managed for high quality wood.• Pruning activities of forest workers can be classified as "hard" or "very hard work". Depending on the tools used physical long-term damages may be prevented. AbstractFor the substitution of wood from tropical rainforests pruning of Eucalyptus for producing valuable hardwoods in short rotation plantations has become important. Existing tools and ergonomic aspects of pruning were not yet well analysed under these conditions. The objective of the study is to evaluate the productivity and ergonomics of three different pruning tools in a pruning lift up to 3 m in height. The trees used in the study came from an 18-month-old clonal Eucalyptus grandis stand planted in a 5.0 x 2.8 m spacing. Two manual pruning tools and an electric shear were tested for productivity by using time studies. Ergonomic aspects were evaluated by two test persons using pulse meter equipment. The highest productivity could be shown for the electric shear (236 trees per working day), followed by the manual shear (196 trees/day) and the handsaw (180 trees/day). The heartbeat rate of the two test persons ranged from a level of "very hard work" for the manual tools to "middle hard" and "hard work" for the electric shear. The workload level to achieve the productivity currently reached in practice using purely manual tools is extremely high, exceeding the permanent working capacity of the operators and leading to physical degradation on the long run.
Species of the genus Eucalyptus managed for sawlogs in fast-growing plantations show high potential for substitution for valuable native hardwoods. To obtain high quality wood, technical pruning is necessary. The objective of the study is to analyse the development of the branches for the first and second pruning lifts and to quantify the biomass of the pruned branches. For the study two stands of Eucalyptus grandis were selected (age 18 and 36 months) for evaluating a pruning lift from 0 to 3 m and 3 to 6 m. The average branch diameter and length were 18 mm and 2.1 m in the younger stand and 21 mm and 2.3 m in the older one. The relation between branch diameter and branch length could be expressed in a linear model (R² = 0.8). In both stands a higher proportion of branches were already dead. The oven-dry biomass of the pruned branches was 2.2 ton.ha-1 in the first pruning lift and 1.2 ton.ha-1 in the second. The results showed that branch development in wide spaced and early thinned eucalypt plantations is in line with the objective of high quality wood production. Pruning should take place before 18 month to avoid dead branches. The oven-dry branch biomass cut in the two pruning lifts shows a low volume making a commercial utilization difficult.
No abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.