The effects of multi-walled carbon nanotubes (MWCNTs) and nanosilica on tensile behavior of woven carbon fabric-reinforced epoxy composites have been studied. Multi-scale composites with epoxy matrices modified with different MWCNT and nanosilica contents (0.1, 0.5 and 0.9 wt.%) have been fabricated by vacuum-assisted resin infusion molding (VARIM). The dispersion of the nanoparticles in the epoxy resin has been made using an ultrasound and high-speed shearing method. Incorporation of nanoparticles improved tensile behavior and this effect was more evident in the case of composites reinforced with 0.5 wt.% of MWNCT and nanosilica. Incorporating either of the tow nanoparticles at 0.9 wt.% leads to a decrease in the trend of tensile properties. Examination of fracture surfaces using scanning electron microscopy (SEM) showed that by incorporating 0.9 wt.% of each nanoparticle, there are local MWCNT and nanosilica agglomerations within the composites. These nanoparticle-agglomerates reduced their potential strengthening effect in multi-scale composites containing 0.9 wt.% of nanoparticles. Also, SEM images showed that the MWCNTs and nanosilica enhanced the fiber–matrix interfacial strength and then by toughening the surrounding matrix, improved the strength and stiffness of multi-scale composites.
The first aim of this paper is to experimentally explore the effect of multi-walled carbon nanotubes (MWCNTs) on the coefficient of thermal expansion (CTE) of epoxy-based composites. Focusing on the obtained experimental data, two important conclusions can be drawn. 1) Though the CTE of carbon nanotubes (CNTs) is lower than that of neat epoxy, using more CNT does not necessarily decrease the CTE of epoxy polymer. 2) The optimum weight percent of CNT is 0.3 which can reduce the CTE of epoxy up to 33%. As the second goal of the present research work, thermal buckling analysis of rectangular carbon fiber-reinforced CNT/epoxy polymer (CFRCNTEP) laminated composite plates is performed numerically. To this purpose, first, using the obtained experimental data and micro-mechanical models, the thermo-elastic properties of structure are calculated. Then, based on the first-order shear deformation theory (FSDT) and by means of generalized differential quadrature (GDQ) method, the influence of CNTs on the critical buckling temperature of CFRCNTEP composite plates is investigated. The numerical results reveal that MWCNTs can strongly affect thermal buckling behavior of composite plates. It is observed that by adding 0.3 wt% CNTs into the matrix phase, the critical buckling temperature increases between 35 to 42%.
Investigation and analysis of the dynamic behavior of composite materials and their failure resistance are essential. The main aim of this study is to investigate the improvement of impact properties of incorporated glass fiber reinforced polymer (GFRP) composite specimens with various loading of nanoclay and nanosilica in a corrosive environment. After fabrication of samples by hand layup method, all of them were immersed in 5 wt. % of sulfuric acid solution for 0, 1 and 3 months. As the immersion time increased, the specimens containing nanosilica absorbed more water than the other samples. The force-displacement, force-time and energy-time diagrams showed the superiority of filled composites with nanoparticles over the pure sample in all immersion periods. Low-velocity impact (LVI) test results of specimens containing nanoclay showed a better behavior and with the addition of 5 wt. % of nanoclay, the impact force increased by 15.72% and the displacement decreased by 5.26%. Also, in these samples, the energy absorption rate decreased by 17.15%, which was associated with a reduction in the damage rate. After immersion of specimens in different times, specimens containing 5 wt. % of nanoclay had better strength than other samples and maintained their superior properties. The obtained results illustrated that the addition of 1 and 3 wt. % of nanosilica had no specific effect on the improvement of impact properties. Finally, incorporated GPRP composites with 3 wt. % of nanoparticles were simulated using LS-DYNA software and the experimental and numerical results were compared to investigate their accordance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.