This study proposes a fast and precise voltage feedback-based islanding detection method (IDM) for grid-connected photovoltaic systems (GCPVSs) based microgrid. In this algorithm, a disturbance containing the absolute deviation of the output voltage is injected into the inverter's d-axis reference current which tunes the active power output. In islanded mode, the applied disturbance reduces the active power output and consequently point of common coupling voltage beyond the standard setting while its effect at the presence of the grid is negligible. The assessment of the proposed IDM has been conducted in the MATLAB/Simulink platform under extensive scenarios defined by IEEE 1547-2008 and UL 1741 standards for a case study system with two large-scale GCPVSs. The provided outputs remark accurate islanding classification in all cases within 810 ms, much lower than the maximum permissible time postulated in islanding standards. This time is short enough to restore GCPVS for autonomous operation of microgrid as well. The comparative analysis of the proposed strategy with a few existing IDMs confirmed its overall superiorities in the terms of non-detection zone, detection time, being applicable into the microgrid, simple threshold determination, and straightforward and cost-effective implementation.

This paper proposes a novel islanding detection method (IDM) for grid-connected photovoltaic systems (GCPVSs) through a disturbance injection in the maximum power point tracking (MPPT) algorithm. When an absolute deviation of the output voltage exceeds a threshold, the applied disturbance shifts system operating point from its maximum power point (MPP) condition. This leads to a sharp active power output reduction and consequently, a significant voltage drop in islanded mode beyond the standard voltage limit. The proposed algorithm is defined in a way that the distributed generator (DG) can be restored to MPP after islanding classification. It is thereby effective in microgrid in where the power injection at maximum level to cater the critical loads and maintain the stability of the isolated area are pursued. An intentional time delay has also been considered to avoid nuisance tripping in short-circuit faults which do not require tripping. The assessment of the proposed technique has been conducted for a sample network containing two GCPVSs in a real-time platform including actual relays in hardware-in-the-loop (HiL). The provided results under extensive islanding scenarios defined in islanding standards endorse timely and accurately detection with negligible non-detection zone (NDZ) as well as no false tripping in non-islanding disturbances. The comparative analysis of the presented scheme with a few recent IDMs for GCPVS highlights its overall superiorities, including very small NDZ, fast detection, thresholds self-standing determination, no adverse effect on power quality, and simple and inexpensive integration. Index Terms-Grid-connected photovoltaic system (GCPVS), Islanding detection method (IDM), Maximum power point tracking (MPPT), Microgrid, Non-detection zone (NDZ). I. INTRODUCTIONT HE penetration of distributed generators (DGs) has significantly risen in the electrical network. Among all DG types, grid-connected photovoltaic system (GCPVS) with the environmental, technical, and economic benefits is proven to be the most promising technology during the past decade [1]. The

This paper proposes a fast and reliable two-level islanding detection method (IDM) for grid-connected photovoltaic systems (GCPVSs) based microgrid. In the first level of the proposed IDM, the magnitude of rate of change of output voltage (ROCOV) is computed. If this variable exceeds a predefined threshold, a disturbance is injected into the duty cycle of DC/DC converter after a given time delay to deviate the system operating point away of its maximum power point (MPP) condition. This leads to a substantial active power output and voltage reduction in islanded mode. Therefore, the ROCOV and the rate of change of active power output (ROCOP) indices, measured in the second stage, pose great negative sets at the same time in islanding states. However, the variation of at least one of these variables is nearzero in non-islanding switching events. The assessment of the presented algorithm has been conducted under extensive islanding and non-islanding scenarios for a case study system with two PV power plants using hardware-in-the-loop (HiL) simulation tests. The provided results remark precise islanding classification with eminently small non-detection zone (NDZ) within 510 ms. The presented IDM has the advantages of self-standing thresholds determination, no improper effect on the output power quality, and simple and inexpensive structure. Moreover, the fast MPP restoration of the proposed scheme after islanding identification boosts the chance of seamless reconnection and DG autonomous operation in microgrid. Index Terms-Grid-connected photovoltaic system (GCPVS), Islanding detection method (IDM), Maximum power point (MPP), Microgrid, Non-detection zone (NDZ), Rate of change of active power output (ROCOP), Rate of change of output voltage (ROCOV).

Currently, the economy of Middle Eastern countries relies heavily on fossil fuel sources. The direct and indirect adverse consequences of fossil fuel utilization for power generation enforce the region’s countries to raise the share of renewable energy. In this context, various incentive policies have been developed to encourage the residential and industrial sectors to support a portion of energy needs through renewable energy resources. In this case, a solar water heating system (SWHS) as an application of solar thermal technology provides some of the heat energy requirements for domestic hot water (DHW) and space heating, supported conventionally by electricity or natural gas, or even other fossil fuels. This paper reviews the feasibility of the SWHS in the Middle East region from technical and economical standpoints and investigates some of the progress, challenges, and barriers toward this market. The pay-back times and CO2 emission reduction under different incentive frameworks and configurations of each system have been assessed in this context. Furthermore, the advantages and weaknesses of the SWHS in several countries have been reported. Finally, various guidelines have been proposed to enhance the development of this technology.

Islanding refers to a condition where distributed generators (DGs) inject power solely to the local load after electrical separation from power grid. Several islanding detection methods (IDMs) categorized into remote, active, and passive groups have been reported to detect this undesirable state. In active techniques, a disturbance is injected into the DG' s controller to drift a local yardstick out of the permissible range. Although this disturbance leads to more effective detections even in well-balanced island, it raises the total harmonic distortion (THD) of the output current under the normal operation conditions. This paper analyzes the power quality aspect of the modified sliding mode controller as a new active IDM for grid-connected photovoltaic system (GCPVS) with a string inverter. Its performance is compared with the voltage positive feedback (VPF) method, a well-known active IDM. This evaluation is carried out for a 1 kWp GCPVS in MATLAB/Simulink platform by measuring the output current harmonics and THD as well as the efficiency under various penetration and disturbance levels. The output results demonstrate that since the proposed disturbance changes the amplitude of the output current, it does not generate harmonics/subharmonics. Thereby, it has a negligible adverse effect on power quality. It is finally concluded that the performance of the sliding mode-based IDM is reliable from the standpoints of islanding detection and power quality. Index Terms-Islanding detection method (IDM), power quality, sliding mode controller, total harmonic distortion (THD), voltage positive feedback (VPF).

No abstract

This paper proposes a new hybrid islanding detection method for grid-connected photovoltaic system (GCPVS)-based microgrid. In the presented technique, the suspicious islanding event is initially recognized whilst the absolute deviation of the point of common coupling (PCC) voltage surpasses a threshold. After an intentional delay, a transient disturbance is injected into the voltage source inverter’s d-axis reference current to decline the active power output. As a result, the PCC voltage reduces in islanding operating mode whilst its variation is negligible in the grid presence. Therefore, the simultaneous drop of PCC voltage and active power output is used as an islanding detection criterion. The effectiveness of the proposed algorithm is investigated for various islanding and non-islanding scenarios for a practical distribution network with three GCPVSs. The simulation results in MATLAB/Simulink show successful islanding detection with a small non-detection zone within 300 ms without false tripping during non-islanding incidents. In addition to the precise and fast islanding classification, the presented scheme is realized inexpensively; its thresholds are determined self-standing, and its output power quality degradation is eminently small. Moreover, the active power output is restored to the nominal set after islanding recognition, enhancing the chance of GCPVS generation at its highest possible level in the autonomous microgrid.

No abstract