Demagnetization faults have a negative impact on the behavior of permanent-magnet synchronous machines, thus reducing their efficiency, generating torque ripple, mechanical vibrations, and acoustic noise, among others. In this paper, the displacement of the shaft trajectory induced by demagnetization faults is studied. It is proved that such faults may increase considerably the amplitude of the rotor displacement. The direct measure of the shaft trajectory is performed by means of a noncontact self-mixing interferometric sensor. In addition, the new harmonics in the back electromotive force (EMF) and the stator current spectrum arising from the shaft displacement are analyzed by means of finite-element method (FEM) simulations and experimental tests. Since conventional finite-element electromagnetic models are unable to predict the harmonics arising from the shaft trajectory displacement, an improved finite-element model which takes into account the measured trajectory has been developed. It is shown that this improved model allows obtaining more accurate back EMF and stator current spectra than those obtained by means of conventional models. This work presents a comprehensive analysis of the effects generated by demagnetization faults, which may be useful to develop improved fault diagnosis schemes.
A self-mixing laser diode vibrometer including an adaptive optical element in the form of a liquid lens (LL) has been implemented and its benefits demonstrated. The LL arrangement is able to control the feedback level of the self-mixing phenomenon, keeping it in the moderate feedback regime, particularly suitable for displacement measurements. This control capability has enabled a remarkable increase in the sensor-to-target distance range where measurements are feasible. Target vibration signal reconstructions present a maximum error of lambda radical16 as compared with a commercial sensor, thus providing an improved working range of 6.5 cm to 265 cm.
We propose differential optical feedback interferometry, a technique able to measure nanometer-size amplitude displacements by comparing the optical power of two lasers subject to optical feedback. In this letter, the principles of the technique are explained in detail, and its limits are explored by simulation. Theoretical results are presented showing that the technique can measure nanometer scale displacements with resolution within the angstrom scale. An experimental setup for validation has been built, and a series of experimental tests were performed using a capacitive sensor as a reference. Results show good agreement between theory and experiment with a reasonable reduction in performance due to mechanical coupling and signal noise. The proposed technique, thus, provides measurements of a very high resolution using an extremely simple and robust experimental setup.Index Terms-Laser sensors, nanodisplacement sensing, optical feedback interferometry, optical metrology.
Optical feedback interferometry (OFI) sensors are experiencing a consistent increase in their applications to biosensing due to their contactless nature, low cost and compactness, features that fit very well with current biophotonics research and market trends. The present paper is a review of the work in progress at UPC-CD6 and LAAS-CNRS related to the application of OFI to different aspects of biosensing, both in vivo and ex vivo. This work is intended to present the variety of opportunities and potential applications related to OFI that are available in the field. The activities presented are divided into two main sensing strategies: The measurement of optical path changes and the monitoring of flows, which correspond to sensing strategies linked to the reconstruction of changes of amplitude from the interferometric signal, and to classical Doppler frequency measurements, respectively. For optical path change measurements, measurements of transient pulses, usual in biosensing, together with the measurement of large displacements applied to designing palliative care instrumentation for Parkinson disease are discussed. Regarding the Doppler-based approach, progress in flow-related signal processing and applications in real-time monitoring of non-steady flows, human blood flow monitoring and OFI pressure myograph sensing will be presented. In all cases, experimental setups are discussed and results presented, showing the versatility of the technique. The described applications show the wide capabilities in biosensing of the OFI sensor, showing it as an enabler of low-cost, all-optical, high accuracy biomedical applications.
An analysis of speckle effects and the techniques to overcome them in self-mixing interferometry signals is presented. We characterize the effect of surface roughness and laser spot size on the speckle modulation of the signal, and then propose two simple experimental approaches to overcome the amplitude fading induced by the speckle effect. Unlike the techniques proposed until now, our first approach uses an adaptive optical element in the form of a voltage-programmable liquid lens, which adaptively changes its focal length to modify the speckle pattern. Our second approach combines two laser signals which present different performance parameters. By using any of these simple methods, the introduction of inaccuracies in the measurement process due to speckle is avoided.Index Terms-Displacement measurement, interferometry selfmixing, speckle effect.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.