Preparation and studies of ion exchangeable epoxy resins, stimuli responsive hydrogels, and polymer-dye conjugates have been accomplished through hydrazide based click reactions using polyacryloyl hydrazide (PAH) as the precursor. A convenient synthesis of PAH with quantitative functionality was achieved by treatment of polymethyl acrylate with hydrazine hydrate in the presence of tetra-n-butyl ammonium bromide. PAH was cured with bisphenol A diglycidyl ether (BADGE) at 60 °C to form transparent resins with superior mechanical properties (tensile strength = 2-40 MPa, Young's modulus = 3.3-1043 MPa, and ultimate elongation = 9-75%) compared to the conventional resins prepared using triethylene tetramine. The resins exhibited higher ion exchange capacities (1.2-6.3 mmol/g) compared to the commercial AHA ammonium-type (Tokuyama Co., Japan) membranes. An azo dye with aldehyde functionality was covalently attached to PAH through hydrazone linkage, and the dye labeled PAH exhibited colorimetric sensing ability for base and acids up to micromolar concentration. The swelling of the PAH based hydrogel varied in the range 4-450% depending on the pH and temperature of the medium. The hydrogels gradually released 30% of the original encapsulated dye in a period of 200 h. PAH-hydroxy naphthaldehyde conjugate released 75% of the original loading in ∼11 days at 37 °C and pH 5.0 through cleavage of the -CONHN═C- linkage. The study depicts the versatility of PAH as a precursor and inspires synthesis of a range of new materials based on PAH in the future.
Utilizing the dynamic amidation and aza-Michael addition chemistry, a set of high strength, recyclable, and self-healable covalent adaptable networks (CANs) are synthesized by reacting the precursor and commercial oligoamine cross-linkers under mild temperature (25–50 °C) and solvent-free conditions. The amide linkages present in these CANs are readily hydrolyzable under mild acidic (pH = 5.3) conditions, whereas the aza-Michael adducts with secondary amines are thermally reversible. Utilizing the above, these CANs are depolymerized under ambient conditions in mild acidic solution and recycled with retention of original mechanical properties. The crack on the material surface is self-healed at 50 °C. The precursor, a Knoevenagel condensation product of terephthalaldehyde and diethyl malonate, is easily synthesized in a large scale. Suitable model compounds are synthesized and studied to further understand the transformations involved in the polymerization–depolymerization of these networks. These networks exhibit adequate tensile properties (ultimate tensile strength ≤35 MPa and Young’s modulus ≤3 GPa), and the properties can be tuned further by suitably changing the oligoamine cross-linker. The simplicity of synthesis, cost effectiveness, adequate mechanical property, stability in aqueous and organic media, and recyclability along with self-healability render these CANs suitable for a range of applications.
Herewith, we report a facile synthesis of pH responsive polyacryloyl hydrazide (PAH) capped silver (Ag) or gold (Au) nanogels for anticancer therapeutic applications. A cost-effective instant synthesis of PAH-Ag or PAH-Au nanoparticles (NPs) possessing controllable particle diameter and narrow size distribution was accomplished by adding AgNO3 or AuCl to the aqueous solution of PAH under ambient conditions without using any additional reagent. PAH possessing carbonyl hydrazide pendant functionality served as both reducing and capping agent to produce and stabilize the NPs. The stability analysis by UV-vis, dynamic light scattering, and transmission electron microscopy techniques suggested that these NPs may be stored in a refrigerator for at least up to 2 weeks with negligible change in conformation. The average hydrodynamic size of PAH-Ag NPs synthesized using 0.2 mmol/L AgNO3 changed from 122 to 226 nm on changing the pH of the medium from 5.4 to 7.4, which is a characteristic property of pH responsive nanogel. Camptothecin (CPT) with adequate loading efficiency (6.3%) was encapsulated in the PAH-Ag nanogels. Under pH 5.4 conditions, these nanogels released 78% of the originally loaded CPT over a period of 70 h. The antiproliferative potential of PAH-Ag-CPT nanogels (at [CPT]=0.6 μg/mL) against MCF-7 breast adeno-carcinoma cells were ∼350% higher compared to that of the free CPT as evidenced by high cellular internalization of these nanogels. Induction of apoptosis in MCF-7 breast adeno-carcinoma cells by PAH-Ag-CPT nanogels was evidenced by accumulation of late apoptotic cell population. Drug along with the PAH-Ag NPs were also encapsulated in a pH responsive hydrogel through in situ gelation at room temperature using acrylic acid as the cross-linker. The resulting hydrogel released quantitative amounts of both drug and PAH-Ag NPs over a period of 16 h. The simplicity of synthesis and ease of drug loading with efficient release render these NPs a viable candidate for various biomedical applications, and moreover this synthetic procedure may be extended to other metal NPs.
Highly stable pine oil-loaded nanoemulsions were evaluated for nutraceutical and storage stability applications. Pine oil-loaded nanoemulsion preparation was done with pine oil as the oily phase and additionally with different ratios of the non-ionic surfactant (Tween 80) and cosurfactant (ethanol) in an aqueous solution using the isothermal lowenergy or spontaneous emulsification method. A transparent and stable nanoemulsion was obtained with a combination of pine oil (5 wt %), surfactant mixture (35 wt %), and water quantity sufficient (qs) by the isothermal low-energy method. The mean droplet size and ζ-potential of the fabricated nanoemulsion were ≈14 nm and −3.4 mV, respectively. The size of the transparent nanoemulsion increased to ∼45 nm and showed turbidity at 60 °C. Microrheological investigation highlighted the gel−sol−gel conversion in the presence of applied angular frequency at 25 °C. The loss modulus shifted to lower frequency at 60 °C in comparison to other temperatures. The anticholinesterase (AChE) inhibition activity of the pine oil-loaded nanoemulsion suggested a possible therapeutic value, and at 0.10% concentration of the nanoemulsion, the AChE inhibition activity was ≈95.72 ± 5.59%. These studies have important implications in fabrication and optimization of a nanoemulsion as a delivery system for combating reminiscence in Alzheimer's disease and application in the nutraceutical-based industry. This isothermal low-energy method offers an advantage of preparing an edible oil delivery system using simple and rapid operational parameters.
Three-dimensional (3D) printing is gaining numerous advances in manufacturing approaches both at macro- and nanoscales. Three-dimensional printing is being explored for various biomedical applications and fabrication of nanomedicines using additive manufacturing techniques, and shows promising potential in fulfilling the need for patient-centric personalized treatment. Initial reports attributed this to availability of novel natural biomaterials and precisely engineered polymeric materials, which could be fabricated into exclusive 3D printed nanomaterials for various biomedical applications as nanomedicines. Nanomedicine is defined as the application of nanotechnology in designing nanomaterials for different medicinal applications, including diagnosis, treatment, monitoring, prevention, and control of diseases. Nanomedicine is also showing great impact in the design and development of precision medicine. In contrast to the “one-size-fits-all” criterion of the conventional medicine system, personalized or precision medicines consider the differences in various traits, including pharmacokinetics and genetics of different patients, which have shown improved results over conventional treatment. In the last few years, much literature has been published on the application of 3D printing for the fabrication of nanomedicine. This article deals with progress made in the development and design of tailor-made nanomedicine using 3D printing technology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.