The search for ferromagnetism above room temperature in dilute magnetic semiconductors has been intense in recent years. We report the first observations of ferromagnetism above room temperature for dilute (<4 at.%) Mn-doped ZnO. The Mn is found to carry an average magnetic moment of 0.16 mu(B) per ion. Our ab initio calculations find a valance state of Mn(2+) and that the magnetic moments are ordered ferromagnetically, consistent with the experimental findings. We have obtained room-temperature ferromagnetic ordering in bulk pellets, in transparent films 2-3 microm thick, and in the powder form of the same material. The unique feature of our sample preparation was the low-temperature processing. When standard high-temperature (T > 700 degrees C) methods were used, samples were found to exhibit clustering and were not ferromagnetic at room temperature. This capability to fabricate ferromagnetic Mn-doped ZnO semiconductors promises new spintronic devices as well as magneto-optic components.

We present atomic-scale, video-rate environmental transmission electron microscopy and in situ time-resolved X-ray photoelectron spectroscopy of surface-bound catalytic chemical vapor deposition of single-walled carbon nanotubes and nanofibers. We observe that transition metal catalyst nanoparticles on SiOx support show crystalline lattice fringe contrast and high deformability before and during nanotube formation. A single-walled carbon nanotube nucleates by lift-off of a carbon cap. Cap stabilization and nanotube growth involve the dynamic reshaping of the catalyst nanocrystal itself. For a carbon nanofiber, the graphene layer stacking is determined by the successive elongation and contraction of the catalyst nanoparticle at its tip.

Self-assembled nanowires offer the prospect of accurate and scalable device engineering at an atomistic scale for applications in electronics, photonics and biology. However, deterministic nanowire growth and the control of dopant profiles and heterostructures are limited by an incomplete understanding of the role of commonly used catalysts and specifically of their interface dynamics. Although catalytic chemical vapour deposition of nanowires below the eutectic temperature has been demonstrated in many semiconductor-catalyst systems, growth from solid catalysts is still disputed and the overall mechanism is largely unresolved. Here, we present a video-rate environmental transmission electron microscopy study of Si nanowire formation from Pd silicide crystals under disilane exposure. A Si crystal nucleus forms by phase separation, as observed for the liquid Au-Si system, which we use as a comparative benchmark. The dominant coherent Pd silicide/Si growth interface subsequently advances by lateral propagation of ledges, driven by catalytic dissociation of disilane and coupled Pd and Si diffusion. Our results establish an atomistic framework for nanowire assembly from solid catalysts, relevant also to their contact formation.

Structural analysis and thermal conductivity data on Sr 8 Ga 16 Ge 30 and Eu 8 Ga 16 Ge 30 crystals are reported. These compounds form in the cubic space group Pm3 n with lattice parameters of 10.721͑2͒ and 10.703͑2͒ Å respectively. Single-crystal x-ray diffraction and structural refinement indicate that the randomly distributed Ga and Ge atoms form a tetrahedrally bonded three-dimensional net in whose cavities the ''guest'' Sr or Eu atoms reside. The ''guest'' atoms in the smaller of these polyhedra ͑dodecahedra͒ have spherical thermal ellipsoids while those in the larger polyhedra ͑tetrakaidecahedra͒ display relatively large and highly anisotropic thermal ellipsoids. The low-thermal conductivity of these compounds at low temperatures is attributable to the disorder introduced by the dynamic ''rattling'' introduced by these ''guest'' atoms inside the polyhedra. The potential of this material system for thermoelectric applications is also discussed.

We study catalyst-support and catalyst-carbon interactions during the chemical vapor deposition of singlewalled carbon nanotubes by combining environmental transmission microscopy and in situ, time-resolved X-ray photoelectron spectroscopy. We present direct evidence of what constitutes catalyst functionality by comparing the behavior of Ni, Fe, Pd, and Au model catalyst films on SiO 2 during preannealing in O 2 and NH 3 and during C 2 H 2 decomposition. The catalyst metal surface supplies sites to dissociate the hydrocarbon precursor and then guides the formation of a carbon lattice and the liftoff of a carbon cap. The catalysts are sharply distinguished by their reactivity toward activation of the hydrocarbon precursor, following trends known from heterogeneous catalysis. For Fe and Ni, the active state of the catalyst is a crystalline metallic nanoparticle. Graphitic networks do not form on oxidized Fe. Pd forms a silicide on SiO 2 under our reducing conditions. Pd (silicides) and Au nanocrystals are catalytically less efficient in terms of precursor dissociation, while the low adhesion of C on Au surfaces impedes nanotube nucleation.

Polymer hydrogels synthesized by chemical crosslinking of acrylate or acrylamide monomers can absorb more than 100 times their weight in water. However, such gels are usually fragile and rupture when stretched to moderate strains (∼50%). Many strategies have been developed to create tougher gels, including double-networking, incorporation of nanoparticles as cross-linkers, etc., but these strategies typically retard the water absorbency of the gel. Here, we present a new approach that gives rise to superabsorbent hydrogels having superior mechanical properties. The key to our approach is the self-cross-linking ability of N,Ndimethylacrylamide (DMAA). That is, we conduct a free-radical polymerization of DMAA (along with an ionic comonomer such as sodium acrylate) but without any multifunctional monomers. A hydrogel still forms due to interchain covalent bonds between the growing linear polymer chains. Gels formed by this route can be stretched up to 1350% strain in the unswollen state. The same gels are also superabsorbent and can imbibe up to 3000 times their weight in water (which is believed to be a record). Even in the swollen state, these gels can be stretched up to strains ∼400% before rupture, which substantially exceeds that of conventional superabsorbent gels. The superior properties of DMAAbased gels are attributed to a more uniform distribution of cross-links within their networks.

Oxygen vacancy formation and migration in ceria (CeO(2)) is central to its performance as an ionic conductor. It has been observed that ceria doped with suitable aliovalent cationic dopants improves its ionic conductivity. To investigate this phenomenon, we present total energy calculations within the framework of density functional theory to study oxygen vacancy migration in ceria and Pr-doped ceria (PDC). We report activation energies for oxygen vacancy formation and migration in undoped ceria and for different migration pathways in PDC. The activation energy value for oxygen vacancy migration in undoped ceria was found to be in reasonable agreement with the available experimental and theoretical results. Conductivity values for reduced undoped ceria calculated using theoretical activation energy and attempt frequency were found in reasonably good agreement with the experimental data. For PDC, oxygen vacancy formation and migration were investigated at first, second, and third nearest neighbor positions to a Pr ion. The second nearest neighbor site is found to be the most favorable vacancy formation site. Vacancy migration between first, second, and third nearest neighbors was calculated (nine possible jumps), with activation energies ranging from 0.41 to 0.78 eV for first-nearest-neighbor jumps. Overall, the presence of Pr significantly affects vacancy formation and migration, in a complex manner requiring the investigation of many different migration events. We propose a relationship illuminating the role of additional dopants toward lowering the activation energy for vacancy migration in PDC.

This review article discusses the current and future possibilities for the application of in situ transmission electron microscopy to reveal synthesis pathways and functional mechanisms in complex and nanoscale materials. The findings of a group of scientists, representing academia, government labs and private sector entities (predominantly commercial vendors) during a workshop, held at the Center for Nanoscale Science and Technology- National Institute of Science and Technology (CNST-NIST), are discussed. We provide a comprehensive review of the scientific needs and future instrument and technique developments required to meet them.