No abstract

No abstract

No abstract

Aim: Magnetic hydrogels (MHGs) have been proposed to avoid the redistribution and loss of magnetic nanoparticles (MNPs) when administrated by intratumoral injection. However, the requirement of complex cooling systems and temperature monitoring systems still hinder the clinical application of MHGs. This study investigates the feasibility of developing an MHG to realize the self-regulation of hyperthermia temperature. Methods: The MHG was developed by dispersing the MNPs with self-regulating temperature property into the temperature-sensitive hydrogel through physical crosslinking. The MHG's gelation temperature was tested by measuring the storage modulus and loss modulus on a rotational rheometer. The biocompatibility of the MHG and MNPs was characterized by CCK-8 assay against HaCaT cells. The in vivo magnetic heating property was examined through monitoring the temperature in the MHG on mice back upon the application of the alternating magnetic field (400 ± 5 Oe, 100 ± 5 kHz) every week for successive six weeks. Results: The gelation temperature of the MHG falls in 28.4 C-37.4 C. At in vivo applied concentration of 80 mg/mL, the MHG exhibits over 80% cell viability after 72 h, significantly higher than 50% cell viability of the MNPs (p<0.001). The MHG's stable magnetic hyperthermia temperatures in vivo are in the range of 43.4 C-43.8 C. Conclusions: The developed MHG can be injected using a syringe and will solidify upon body temperature. The biocompatibility is improved after the MNPs being made into MHG. The MHG can selfregulate the temperature for six weeks, exhibiting application potential for self-regulating temperature hyperthermia.

No abstract

Hysteresis loss and relaxation loss are the two dominant heating mechanisms of magnetic nanoparticles (MNPs) in an alternating magnetic field (AMF). In magnetic induction hyperthermia, heating efficiency is one of the crucial factors. It is proposed that the MNPs with a dominant heating mechanism of relaxation loss will exhibit a higher heating efficiency. However, the relative experiments supporting the proposal is still absent due to the difficulty of obtaining the MNPs with the same components and similar morphology but different dominant heating mechanism. Here, the post-processing method of calcination is employed to change the cation distribution of the MNPs (Fe3O4 and Zn0.54Co0.46Cr0.6Fe1.4O4), so as to obtain the MNPs with similar morphology but different dominant heating mechanism. The magnetic heating experiments were conducted to examine the heating efficiency. The results suggest that the MNPs with relaxation loss have a higher heating efficiency under the investigated AMF.

Walnut shell based activated carbon (WAC) was prepared via microwave-assisted KOH activation.

No abstract