An emerging therapy to limit adverse heart remodelling following myocardial infarction (MI) is the injection of polymers into the infarcted left ventricle (LV). In the few numerical studies carried out in this field, the definition and distribution of the hydrogel in the infarcted myocardium were simplified. In this computational study, a more realistic biomaterial distribution was simulated after which the effect on cardiac function and mechanics was studied. A validated finite element heart model was used in which an antero-apical infarct was defined. Four infarct models were created representing different temporal phases in the progression of a MI. Hydrogel layers were simulated in the infarcted myocardium in each model. Biomechanical and functional improvement of the LV was found after hydrogel inclusion in the ischaemic models representing the early phases of MI. In contrast, only functional but no mechanical restitution was shown in the scar model due to hydrogel presence.

Myocardial infarction therapies involving biomaterial injections have shown benefits in inhibiting progression towards heart failure. However, the underlying mechanisms remain unclear. A finite element model of the human left ventricle was developed from magnetic resonance images. An anteroapical infarct was represented at acute (AI) and fibrotic (FI) stage. Hydrogel injections in the infarct region were modelled with layered (L) and bulk (B) distribution. In the FI, injectates reduced end-systolic myofibre stresses from 291.6% to 117.6% (FI-L) and 115.3% (FI-B) of the healthy value, whereas all AI models exhibited sub-healthy stress levels (AI: 90.9%, AI-L: 20.9%, AI-B: 30.5%). Reduction in end-diastolic infarct stress were less pronounced for both FI (FI: 294.1%, FI-L: 176.5%, FI-B: 188.2%) and AI (AI: 94.1%, AI-L: 35.3%, AI-B: 41.2%). In the border zone, injectates reduced end-systolic fibre stress by 8-10% and strain from positive (AI) and zero (FI) to negative. Layered and bulk injectates increased ejection fraction by 7.4% and 8.4% in AI and 14.1% and 13.7% in FI. The layered injectate had a greater impact on infarct stress and strain at acute stage, whereas the bulk injectate exhibited greater benefits at FI stage. These findings were confirmed by our previous in vivo results.

Acellular intra-myocardial biomaterial injections have been shown to be therapeutically beneficial in inhibiting ventricular remodelling of myocardial infarction (MI). Based on a biventricular canine cardiac geometry, various finite element models were developed that comprised an ischemic (II) or scarred infarct (SDI) in left ventricular (LV) antero-apical region, without and with intra-myocardial biomaterial injectate in layered (L) and bulk (B) distribution. Changes in myocardial properties and LV geometry were implemented corresponding to infarct stage (tissue softening vs. stiffening, infarct thinning, and cavity dilation) and injectate (infarct thickening). The layered and bulk injectate increased ejection fraction of the infarcted LV by 77% (II+L) and 25% (II+B) at the ischemic stage and by 61% (SDI+L) and 63% (SDI+B) at the remodelling stage. The injectates decreased the mean end-systolic myofibre stress in the infarct by 99% (II+L), 97% (II+B), 70% (SDI+L) and 36% (SDI+B). The bulk injectate was slightly more effective in improving LV function at the remodelling stage whereas the layered injectate was superior in functional improvement at ischemic stage and in reduction of wall stress at ischemic and remodelling stage. These findings may stimulate and guide further research towards tailoring acellular biomaterial injectate therapies for MI.

No abstract