Background

No abstract

We report to our best knowledge the first all semiconductor Laser Doppler Anemometer (LIDAR) for wind speed determination. We will present the design and first experimental results on a focusing coherent cw laser Doppler anemometer for measuring atmospheric wind velocities in the 10 meters to 300 meters distance range. Especially, we will demonstrate that both the output power as well as the demanding coherence properties required from the laser source can be accomplished by an all semiconductor laser. Preliminary tests at a distance of 40 meters indicate a typical signal to noise ratio of 9 dB. This result is obtained at a clear day with an up-date rate of 12 Hz.

A novel, to our knowledge, method for the measurement of angular displacement for arbitrarily shaped objects is presented in which the angular displacement is perpendicular to the optical axis. The method is based on Fourier-transforming the scattered field from a single laser beam that illuminates the target. The angular distribution of the light field at the target is linearly mapped on a linear image sensor placed in the Fourier plane. Measuring this displacement facilitates the determination of the angular displacement of the target. It is demonstrated both theoretically and experimentally that the angular-displacement sensor is insensitive to object shape and target distance if the linear image sensor is placed in the Fourier plane. A straightforward procedure for positioning the image sensor in the Fourier plane is presented. Any transverse or longitudinal movement of the target will give rise to partial speckle decorrelation, but it will not affect the angular measurement. Furthermore, any change in the illuminating wavelength will not affect the angular measurements. Theoretically and experimentally it is shown that the method has a resolution of 0.3 mdeg ( approximately 5 murad) for small angular displacements, and methods for further improvement in resolution is discussed. No special surface treatment is required for surfaces giving rise to fully developed speckle. The effect of partially developed speckle is considered both theoretically and experimentally.

OBJECTIVEMaximal safe resection is an important surgical goal in the treatment for high-grade gliomas. Fluorescent dyes help the surgeon to distinguish malignant tissue from healthy. The aims of this study were 1) to compare the 2 fluorescent dyes 5-aminolevulinic acid (5-ALA) and sodium fluorescein (fluorescein) regarding extent of resection, progression-free survival, and overall survival; and 2) to assess the influence of other risk factors on clinical outcome and screen for potential disadvantages of the dyes.METHODSA total of 209 patients with high-grade gliomas were included in this retrospective study. Resections were performed in the period from 2012 to 2017 using 5-ALA or fluorescein. Extent of resection was assessed as the difference in tumor volume between early postoperative and preoperative MRI studies. Tumor progression–free survival and overall survival were analyzed using an adjusted Cox proportional hazards model.RESULTSOne hundred fifty-eight patients were operated on with 5-ALA and 51 with fluorescein. The median duration of follow-up was 46.7 and 21.2 months, respectively. Covariables were evenly distributed. There was no statistically significant difference in volumetrically assessed median extent of resection (96.9% for 5-ALA vs 97.4% for fluorescein, p = 0.46) or the percentage of patients with residual tumor volume less than 0.175 cm3 (29.5% for 5-ALA vs 36.2% for fluorescein, p = 0.39). The median overall survival was 14.8 months for the 5-ALA group and 19.7 months for the fluorescein group (p = 0.06). The median adjusted progression-free survival was 8.7 months for the 5-ALA group and 9.2 months for the fluorescein group (p = 0.03).CONCLUSIONSFluorescein can be used as a viable alternative to 5-ALA for intraoperative fluorescent guidance in brain tumor surgery. Comparative, prospective, and randomized studies are much needed.