Nowadays, coatings need to fulfill a variety of requirements such as having excellent mechanical, chemical, and optical properties at low baking temperatures. On a large scale, polyisocyanates, amines or melamines are used as crosslinking agents in the coatings industry. In this work, a new self-crosslinking agent based on a hydroxy functional 6-membered carbonate with high ring tension and thus presumably lower baking temperature was synthesized and the behavior as self-crosslinking agent was compared to the crosslinking agent derived from the commercially available 5-membered glycerol carbonate. The hydroxy functional 6-membered carbonate monomer was synthesized enzymatically under mild reaction conditions from commercially available substances, linked to a hexamethylene diisocyanate trimer and self-polymerized afterward. NMR- and IR-spectroscopy and GC-MS analysis were found to be suitable techniques to characterize monomers and crosslinking agents. DSC measurements were performed to evaluate appropriate reaction parameters for the attachment reaction of the 6-membered cyclic carbonate to the polyisocyanate without ring opening. The progress of self-crosslinking has been followed by characteristic changes in IR spectra as well as time and temperature-dependent changes of storage and loss modulus while oscillating rheological crosslinking. Furthermore, glass transition temperatures of the resulting coating films are determined, and sol gel analysis was performed to estimate the degree of crosslinking. After application on steel, aluminum and glass plates application tests were performed. In addition to excellent mechanical and chemical properties, the coating film showed good adhesion to the surface and was colorless. Combining these properties with relatively low baking temperatures, 6-membered cyclic carbonate crosslinking agents could represent a new technology for the coatings industry.
Nowadays, coating systems have to fulfill a wide range of requirements. In addition to mechanical properties such as hardness and elasticity, resistance and weatherability, specifically corrosion or chemical resistance are also important. Increasing attention is also being paid to points such as the use of sustainable reactants or the energy optimization of synthesis processes.1 The use of enzymes in the synthetic processes offers two main advantages: firstly, reaction temperatures can be significantly reduced, for example in the production of polyesters, and as a result and a major advantage, certain functional groups can be selectively retained during the reaction.2,3 Thus, for example, aromatic hydroxyl groups can be obtained, while aliphatic groups are esterified.4,5 This allows the preparation of polyesters that do not only have terminal OH groups, but hydroxyl groups within the chain that can act as additional crosslinking points during network formation or as adhesion-promoting groups.6,7 In this work, the influence of such an aliphatic–aromatic polyester, produced enzymatically at low temperatures, on the coating properties is investigated when using different hardener components. Coating formulations were created, and the required OH functionality and the hydroxyl number of the enzymatic polyester have been calculated by using two different, independent methods. Besides the development of guide formulations, the unique mechanical properties of coatings based on the enzymatic polyester were studied. In addition to comparative analysis of network densities, the coatings were also investigated by IR spectroscopy in order to assess the network formation reaction spectroscopically. It can be shown that additional OH groups in the polyester chain increase the network density, but this is not at the expense of elasticity. Thus, enzymatically produced polyesters combine the advantages of low reaction temperatures during production with a unique property profile due to aliphatic and aromatic moieties as well as the partial preservation of OH groups within the chain.
Mainly because of the high sensitivity of the isocyanate group to atmospheric moisture, it is blocked with a blocking agent for many applications and thus kept as inert as possible at room temperature (Zhang et al. in Langmuir ACS J Surf Colloids 37:12705, 2021, Meier-Westhues in Polyurethane: Lacke, Kleb-und Dichtstoffe, Vincentz Network, Hannover, p 36, 2007). When exposed to temperature, the protective group unblocks, and the isocyanate group reacts with the reactant that was previously present together with the blocked isocyanate (Meier-Westhues in Polyurethane: Lacke, Kleb- und Dichtstoffe, Vincentz Network, Hannover, p 36, 2007, Goldschmidt and Streitberger in BASF handbook on basics of coating technology, Vincentz Network, Hannover, pp 96–99, 2007). Many of the substances which are used today as blocking agents have toxicological concerns or unblock at high temperatures, which limits their application areas (Guillem Parra et al. in Blocked isocyanate polyurethane compositions using a new blocking agent, method of manufacture and uses thereof: European patent application, 2019, https://data.epo.org/publication-server/document?iDocId=6506253&iFormat=0). In this work, vanillin is presented as an effective deblocking agent at low temperatures and is compared with similar structures. The process of deblocking from an hexamethylene diisocyanate trimer (HDI-trimer) is followed by means of IR-spectroscopic measurements at different temperatures and thermogravimetric analysis. Temperature-dependent oscillation measurements using a rheometer are suitable for measuring onset temperatures and for qualitatively tracking the unblocking process. The combination of the results is used to draw conclusions about the existing deblocking mechanism. The comparatively low deblocking temperature of vanillin enables the formulation of an HDI-trimer modified with sulfonate groups and blocked with vanillin, which is dispersed in the aqueous phase and then reacted with OH-functional binders. Deblocking and subsequent reaction with the binder are followed by means of IR spectroscopy, and the mechanical properties of the coating films are examined. Vanillin is therefore suitable as a toxicologically harmless blocking agent for isocyanates and enables the production of crosslinkers for one-component water-based coatings (Arya et al. Adv Tradit Med (ADTM) 21:1, 2021).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.