Largely based on its very high rechargeable capacity, silicon appears as an ideal candidate for the next generation of negative electrodes for Li-ion batteries. However, a crucial problem with silicon is the large volume expansion undergone upon alloying with lithium, which results in stability problems. Means to avoid such problems are largely linked to the understanding of the interfacial chemistry during charging/discharging. This is especially of great importance when using nanometric silicon particles. In this work, the interfacial mechanisms (reaction of surface oxide, Li−Si alloying process, and passivation layer formation) accompanying lithium insertion/ extraction into Si/C/CMC composite electrodes have been scrutinized by Xray photoelectron spectroscopy (XPS). A thorough nondestructive depthresolved analysis was carried out by using both soft X-rays (100−800 eV) and hard X-rays (2000−7000 eV) from two different synchrotron facilities compared with in-house XPS (1487 eV). The unique combination utilizing hard and soft X-ray photoelectron spectroscopy accompanied with variation of the analysis depth allowed us to access interfacial phase transitions at the surface of silicon particles as well as the composition and thickness of the SEI (electrode/electrolyte interface layer).

Reversible anionic redox has rejuvenated the search for high-capacity lithium-ion battery cathodes. Real-world success necessitates the holistic mastering of this electrochemistry’s kinetics, thermodynamics, and stability. Here we prove oxygen redox reactivity in the archetypical lithium- and manganese-rich layered cathodes through bulk-sensitive synchrotron-based spectroscopies, and elucidate their complete anionic/cationic charge-compensation mechanism. Furthermore, via various electroanalytical methods, we answer how the anionic/cationic interplay governs application-wise important issues—namely sluggish kinetics, large hysteresis, and voltage fade—that afflict these promising cathodes despite widespread industrial and academic efforts. We find that cationic redox is kinetically fast and without hysteresis unlike sluggish anions, which furthermore show different oxidation vs. reduction potentials. Additionally, more time spent with fully oxidized oxygen promotes voltage fade. These fundamental insights about anionic redox are indispensable for improving lithium-rich cathodes. Moreover, our methodology provides guidelines for assessing the merits of existing and future anionic redox-based high-energy cathodes, which are being discovered rapidly.

International audienceArgyrodite Li6PS5Cl is a good candidate for being a solid electrolyte for bulk all-solid-state Li-ion batteries because of its high ionic conductivity and its good processability. However, the interface stability of sulfide-based electrolytes toward active materials (negative or positive electrodes) is known to be lower than that of oxide-based electrolytes. In this work, we investigate the interface stability of argyrodite toward several positive electrode materials: LiCoO2, LiNi1/3Co1/3Mn1/3O2, and LiMn2O4. All-solid-state half-cells were cycled, and the interface mechanisms were characterized by Auger electron spectroscopy and X-ray photoelectron spectroscopy. We show that Li6PS5Cl is oxidized into elemental sulfur, lithium polysulfides, P2Sx (x ≥ 5), phosphates, and LiCl at the interface with the positive electrode active materials. In spite of this interface reactivity, good capacity retention was observed over 300 cycles. Li6PS5Cl shows some reversible electrochemical activity (redox processes) that might contribute to the reversible capacity of the battery

The effect of vinylene carbonate (VC) as electrolyte additive on the formation mechanisms of passivation films covering both electrodes in lithium-ion batteries was investigated by X-ray photoelectron spectroscopy (XPS). LiConormalO2 /graphite coin cells using a LiPnormalF6 /ethylene carbonate:diethyl carbonate:dimethyl carbonate liquid electrolyte with or without VC were charged at 20 and 60°C . The identification of VC-derived products formed at the surface of the electrodes was carried out by a dual experimental/theoretical approach. From a classical XPS core peak analysis completed by a detailed interpretation and simulation of valence spectra supported by ab initio calculations, and through direct synthesis of the VC polymer, we could evidence the formation of the radical poly(VC) at the electrode/electrolyte interfaces. We showed that the radical polymerization is the main reaction mechanism of VC contributing to the formation of the passivation layers at the surface of both electrodes.

International audienceA comprehensive study is reported entailing optimization of sodium ion electrolyte formulation and compatibility studies with positive and negative electrode materials. EC:PC:DMC and EC:PC:DME were found to exhibit optimum ionic conductivities and lower viscosities. Yet, hard carbon negative electrode materials tested in such electrolytes exhibit significant differences in performance, rooted in the different resistivity of the SEI, which results in too large polarization and concomitant loss of capacity at low potentials when DME is used as a co-solvent. EC0.45:PC0.45:DMC0.1 was found to be the optimum composition resulting in good rate capability and high capacity upon sustained cycling for hard carbon electrodes. Its compatibility with positive Na3V2(PO4)2F3 (NVPF) electrodes was also confirmed, which led to the assembly of full Na-ion cells displaying an operation voltage of 3.65 V, very low polarisation and excellent capacity retention upon cycling with ca. 97 mA h g−1 of NVPF after more than 120 cycles together with satisfactory coulombic efficiency (>98.5%) and very good power performance. Such values lead to energy densities comparable to those of the current state-of-the-art lithium-ion technology

Silicon presents a very high theoretical capacity (3578 mAh/g) and appears as a promising candidate for the next generation of negative electrodes for Li-ion batteries. An important issue for the implementation of silicon is the understanding of the interfacial chemistry taking place during charge/discharge since it partly explains the capacity fading usually observed upon cycling. In this work, the mechanism for the evolution of the interfacial chemistry (reaction of surface oxide, Li–Si alloying process, and passivation layer formation) upon long-term cycling has been investigated by photoelectron spectroscopy (XPS or PES). A nondestructive depth resolved analysis was carried out by using both soft X-rays (100–800 eV) and hard X-rays (2000–7000 eV) from two different synchrotron facilities. The results are compared with those obtained with an in-house spectrometer (1486.6 eV). The important role played by the LiPF6 salt on the stability of the silicon electrode during cycling has been demonstrated in this study. A partially fluorinated species is formed upon cycling at the outermost surface of the silicon nanoparticles as a result of the reaction of the materials toward the electrolyte. We have shown that a similar species is also formed by simple contact between the electrolyte and the pristine electrode. The reactivity between the electrode and the electrolyte is investigated in this work. Finally, we also report in this work the evolution of the composition and covering of the SEI upon cycling as well as proof of the protective role of the SEI when the cell is at rest.

Lithium deintercalation of Li x CoO 2 from x ) 1 to x ≈ 0 has been carried out electrochemically. The changes in the electronic structure from LiCoO 2 to CoO 2 have been investigated by X-ray photoelectron spectroscopy (XPS) to bring some new developments about the electron transfer mechanisms upon lithium deintercalation. All available XPS core peaks (Co 2p, Co 3p, Co 3s, O 1s, F 1s, P 2p, C 1s) and valence spectra have been analyzed. The contributions of the electrode material and of the electrode/electrolyte interface have been clearly distinguished. We show that cobalt and oxygen simultaneously undergo a partial oxidation process and that the sole participation of oxygen atoms to the charge transfer process, as it is sometimes assumed, can be excluded. The surface film consists of organic and inorganic species resulting from degradation of the electrolyte.

Silicon is a very good candidate for the next generation of negative electrodes for Li-ion batteries, due to its high rechargeable capacity. An important issue for the implementation of silicon is the control of the chemical reactivity at the electrode/electrolyte interface upon cycling, especially when using nanometric silicon particles. In this work we observed improved performances of Li//Si cells by using the new salt lithium bis(fluorosulfonyl)imide (LiFSI) with respect to LiPF6. The interfacial chemistry upon long-term cycling was investigated by photoelectron spectroscopy (XPS or PES). A nondestructive depth resolved analysis was carried out by using both soft X-rays (100-800 eV) and hard X-rays (2000-7000 eV) from two different synchrotron facilities and in-house XPS (1486.6 eV). We show that LiFSI allows avoiding the fluorination process of the silicon particles surface upon long-term cycling, which is observed with the common salt LiPF6. As a result the composition in surface silicon phases is modified, and the favorable interactions between the binder and the active material surface are preserved. Moreover a reduction mechanism of the salt LiFSI at the surface of the electrode could be evidenced, and the reactivity of the salt toward reduction was investigated using ab initio calculations. The reduction products deposited at the surface of the electrode act as a passivation layer which prevents further reduction of the salt and preserves the electrochemical performances of the battery.