The discovery and relevant research progress in graphene oxide liquid crystals (GOLCs), the latest class of 2D nanomaterials exhibiting colloidal liquid crystallinity arising from the intrinsic disc-like shape anisotropy, is highlighted. GOLC has conferred a versatile platform for the development of novel properties and applications based on the facile controllability of molecular scale alignment. The first part of this review offers a brief introduction to LCs, including the theoretical background. Particular attention has been paid to the different types of LC phases that have been reported thus far, such as nematic, lamellar and chiral phases. Several key parameters governing the ultimate stability of GOLC behavior, including pH and ionic strength of aqueous dispersions are highlighted. In a relatively short span of time since its discovery, GOLCs have proved their remarkable potential in a broad spectrum of applications, including highly oriented wet-spun fibers, self-assembled nanocomposites, and architectures for energy storage devices. The second part of this review is devoted to an exclusive overview of the relevant applications. Finally, an outlook is provided into this newly emerging research field, where two well established scientific communities for carbon nanomaterials and liquid crystals are ideally merged.

The development of new batteries has historically been achieved through discovery and development cycles based on the intuition of the researcher, followed by experimental trial and error—often helped along by serendipitous breakthroughs. Meanwhile, it is evident that new strategies are needed to master the ever‐growing complexity in the development of battery systems, and to fast‐track the transfer of findings from the laboratory into commercially viable products. This review gives an overview over the future needs and the current state‐of‐the art of five research pillars of the European Large‐Scale Research Initiative BATTERY 2030+, namely 1) Battery Interface Genome in combination with a Materials Acceleration Platform (BIG‐MAP), progress toward the development of 2) self‐healing battery materials, and methods for operando, 3) sensing to monitor battery health. These subjects are complemented by an overview over current and up‐coming strategies to optimize 4) manufacturability of batteries and efforts toward development of a circular battery economy through implementation of 5) recyclability aspects in the design of the battery.

Commercialization of graphene based applications inevitably requires cost effective mass production. From the early days of research on graphene, direct liquid phase exfoliation (LPE) of graphite has been considered as the most promising strategy to produce high-quality mono or few-layer graphene sheets in solvent dispersion forms. Substantial success has been achieved thus far in the LPE of graphene employing numerous solvent systems and suitable surfactants. This invited review article principally showcase the recent research progress as well as shortcomings of surfactant assisted LPE of graphene. In particular, a comprehensive assessment of the quality and yield of the graphene sheets produced by different categories of the surfactants are summarized. Future direction of LPE methods is also proposed for the eventual success of commercial applications.

Atomic level engineering of graphene-based materials is in high demand to enable customize structures and properties for different applications. Unzipping of the graphene plane is a potential means to this end, but uncontrollable damage of the two-dimensional crystalline framework during harsh unzipping reaction has remained a key challenge. Here we present heteroatom dopant-specific unzipping of carbon nanotubes as a reliable and controllable route to customized intact crystalline graphene-based nanostructures. Substitutional pyridinic nitrogen dopant sites at carbon nanotubes can selectively initiate the unzipping of graphene side walls at a relatively low electrochemical potential (0.6 V). The resultant nanostructures consisting of unzipped graphene nanoribbons wrapping around carbon nanotube cores maintain the intact two-dimensional crystallinity with well-defined atomic configuration at the unzipped edges. Large surface area and robust electrical connectivity of the synergistic nanostructure demonstrate ultrahigh-power supercapacitor performance, which can serve for AC filtering with the record high rate capability of −85° of phase angle at 120 Hz.

Phosphorene suffers from instability under ambient condition, despite its potential to bridge the gap between graphene and two-dimensional (2D) metal chalcogenides. We report effective exfoliation and stabilization of few layer phosphorene (FLP) in the presence of strongly interacting surfactants. Surfactants containing long hydrophobic chain and nonbulky charged headgroups (CTAB) effectively exfoliate and stabilize FLP in water, which is consistent with our density functional theory prediction. Nuclear magnetic resonance measurements are systematically employed to probe the interaction between surfactants and FLP. Retarded diffusion rate measured by 2D DOSY spectroscopy revealed the presence of noncovalently bonded CTAB over phosphorene. 2D NOESY spectroscopy further suggests the interdigitated arrangement of surfactants. Such a tight interaction impedes the ambient degradation rate of phosphorene by 70−80%. This work proposes a new insight into the control over ambient degradation of phosphorene without altering its intrinsic properties.

No abstract

Complex battery degradation is an interplay of different processes correlated to the thermodynamic, chemical, and mechanical instability of materials. Their degradation kinetics and mechanisms are functions of several intrinsic and environmental conditions. The degradation of the battery cell can be minimized by using preventive steps, like artificial interphases, coatings, additives, or materials that operate within the thermodynamic stability voltage window. Like in most systems/applications degradation processes/aging cannot be avoided since battery cells operate in different environments. Self‐healing functionalities have been proved in different areas of material science and they can significantly improve the performance of battery cells. Some of them have been demonstrated on the laboratory scale, while other degradation processes have been tackled only by the development of preventive approaches. Since self‐healing functionalities add additional weight and cost to the battery cell, directions of development should be focused on modification of nonactive materials, preferably based on biosourced materials to lower environmental impact. Important issues include detection of degradation using sensors and the vectorization of self‐healing components and their controlled release. In addition to this, a triggering process of extrinsic self‐healing components together with manufacturability and recyclability should be considered from the early stages of the development phase.

Modern flexible consumer electronics require efficient energy storage devices with flexible free-standing electrodes. We report a simple and cost-effective route to a graphene-based composite aerogel encapsulating metal oxide nanoparticles for high energy density, free-standing, binder-free flexible pseudocapacitive electrodes. Hydrothermally synthesized Co3O4 nanoparticles are successfully housed inside the microporous graphene aerogel network during the room temperature interfacial gelation at the Zn surface. The resultant three-dimensional (3D) rGO-Co3O4 composite aerogel shows mesoporous quasiparallel layer stack morphology with a high loading of Co3O4, which offers numerous channels for ion transport and a 3D interconnected network for high electrical conductivity. All solid state asymmetric pseudocapacitors employing the composite aerogel electrodes have demonstrated high areal energy density of 35.92 μWh/cm(2) and power density of 17.79 mW/cm(2) accompanied by excellent cycle life.