Latent heat storage systems are gaining the attention of researchers as possible substitutes to conventional sensible heat storage systems due to their compactness and their ability to absorb and release heat almost isothermally. Among the Phase Change Materials (PCM) for energy storage studied so far, esters are believed to show promising properties. In particular, a broad range of melting temperatures, little to no supercooling, low corrosivity, chemical and thermal stability, and high enthalpies of fusion are reported. Many esters have the advantage of being bio-based and biodegradable, making them more sustainable in comparison to other popular PCM. Still, a clear lack of experimental data exists in regards to this class. In the present study, esters derived from saturated fatty carboxylic acids (myristic, palmitic, stearic, behenic), coupled with primary linear alcohols of different length (methanol, 1-decanol) were synthesized through Fischer esterification and their properties were investigated. Purities higher than 89% were obtained for all cases as proven by gas chromatography coupled with mass spectroscopy and nuclear magnetic resonance analysis. Additionally, the esters' formation and reaction kinetics were characterized by attenuated total reflectance infrared spectroscopy. The esters produced showed to possess relatively high enthalpies of fusion above 190 J/g and thermal stability over three repeated cycles with differential scanning calorimetry. The melting points measured ranged between 20 • C and 50 • C, therefore proving to be interesting candidates for low-medium temperature applications such as heating and cooling in buildings. A correlation could be observed between the chemical structure and melting point of the produced esters. Additionally, thermogravimetric analysis revealed a higher thermal resistance for esters with longer aliphatic chains in comparison to shorter-chained ones.
As global energy demand increases while primary sources and fossil fuels’ availability decrease, research has shifted its focus to thermal energy storage systems as alternative technologies able to cover for the mismatch between demand and supply. Among the different phase change materials available, esters possess particularly favorable properties with reported high enthalpies of fusion, low corrosivity, low toxicity, low supercooling, thermal and chemical stability as well as biodegradability and being derived from renewable feedstock. Despite such advantages, little to no data on the thermal behavior of esters is available due to low commercial availability. This study constitutes a continuation of previous works from the authors on the investigation of fatty esters as novel phase change materials. Here, methyl, pentyl and decyl esters of arachidic acid, and pentyl esters of myristic, palmitic, stearic and behenic acid are synthesized through Fischer esterification with high purities and their properties are studied. The chemical structures and purities are confirmed through Attenuated Total Reflectance Infrared Spectroscopy, Gas Chromatography coupled with Mass Spectroscopy and Nuclear Magnetic Resonance Spectroscopy, while the determination of the thermal properties is performed through Differential Scanning Calorimetry and Thermogravimetric Analysis. In conclusion, some correlations between the melting temperatures and the chemical structures are discovered, and the fatty esters are assessed based on their suitability as phase change materials for latent heat storage applications.
Thermal Energy Storage Materials (TESMs) may be the missing link to the “carbon neutral future” of our dreams. TESMs already cater to many renewable heating, cooling and thermal management applications. However, many challenges remain in finding optimal TESMs for specific requirements. Here, we combine literature, a bibliometric analysis and our experiences to elaborate on the true potential of TESMs. This starts with the evolution, fundamentals, and categorization of TESMs: phase change materials (PCMs), thermochemical heat storage materials (TCMs) and sensible thermal energy storage materials (STESMs). PCMs are the most researched, followed by STESMs and TCMs. China, the European Union (EU), the USA, India and the UK lead TESM publications globally, with Spain, France, Germany, Italy and Sweden leading in the EU. Dissemination and communication gaps on TESMs appear to hinder their deployment. Salt hydrates, alkanes, fatty acids, polyols, and esters lead amongst PCMs. Salt hydrates, hydroxides, hydrides, carbonates, ammines and composites dominate TCMs. Besides water, ceramics, rocks and molten salts lead as STESMs for large-scale applications. We discuss TESMs’ trends, gaps and barriers for commercialization, plus missing links from laboratory-to-applications. In conclusion, we present research paths and tasks to make these remarkable materials fly on the market by unveiling their potential to realize a carbon neutral future.
In the quest for a decarbonized energy system, the development of highly efficient technologies that allow the integration of renewables is of the utmost importance. Latent Heat Storage systems with Phase Change Materials (PCM) can contribute to solving the issue of the mismatch between demand and supply brought forward by renewable energies. Despite possessing promising thermal properties, organic PCMs and esters in particular have rarely been investigated. In the present study, eight commercial aromatic esters are assessed as possible PCM candidates. To do so, their thermal properties, such as phase change temperature, enthalpy of fusion, density, and thermal conductivity, alongside sustainability and toxicity issues, are considered. The aromatic esters are found to possess phase change temperatures between −16 ∘C and 190 ∘C and maximum enthalpies of fusion of 160 J/g. This, alongside densities above 1 g/mL, makes them interesting candidates for high-temperature applications, where, typically, salts and ceramics or metals dominate as PCMs.
Latent Heat Storage (LHS) with Phase-Change Materials (PCMs) represents a high energy density storage technology which could be applied in a variety of applications such as waste heat recovery and integration of renewable energy technologies in energy systems. To increase the sustainability of these storage solutions, PCMs have to be developed with particular regard to bio-origin and biodegradability. Triglycerides represent an interesting class of esters as the main constituents of animal and vegetable fats, with attractive thermal properties. In order to be used as PCMs, the thermal behaviour of triglycerides has to be fully understood, as in some cases they have been reported to show polymorphism and supercooling. This study assesses the suitability of triglycerides as PCMs by reviewing the literature published so far on their behaviour and properties. In particular, melting points, enthalpies of fusion, polymorphism, thermal conductivities, heat capacities and thermal cycling stabilities are considered, with a focus on LHS and thermal energy storage applications. In addition, the efforts conducted regarding modelling and the prediction of melting points and enthalpies based on chemical structures are summarized and assessed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.