Dynamic mechanical conditioning is investigated as a means of improving the mechanical properties of tissue-engineered blood vessel constructs composed of living cells embedded in a collagen-gel scaffold. This approach attempts to elicit a unique response from the embedded cells so as to reorganize their surrounding matrix, thus improving the overall mechanical stability of the constructs. Mechanical conditioning, in the form of cyclic strain, was applied to the tubular constructs at a frequency of 1 Hz for 4 and 8 days. The response to conditioning thus evinced involved increased contraction and mechanical strength, as compared to statically cultured controls. Significant increases in ultimate stress and material modulus were seen over an 8 day culture period. Accompanying morphological changes showed increased circumferential orientation in response to the cyclic stimulus. We conclude that dynamic mechanical conditioning during tissue culture leads to an improvement in the properties of tissue-engineered blood vessel constructs in terms of mechanical strength and histological organization. This concept, in conjunction with a proper biochemical environment, could present a better model for engineering vascular constructs.

Knowledge of blood vessel mechanical properties is fundamental to the understanding of vascular function in health and disease. Analytic results can help physicians in the clinic, both in designing and in choosing appropriate therapies. Understanding the mechanical response of blood vessels to physiologic loads is necessary before ideal therapeutic solutions can be realized. For this reason, blood vessel constitutive models are needed. This article provides a critical review of recent blood vessel constitutive models, starting with a brief overview of the structure and function of arteries and veins, followed by a discussion of experimental techniques used in the characterization of material properties. Current models are classified by type, including pseudoelastic, randomly elastic, poroelastic, and viscoelastic. Comparisons are presented between the various models and existing experimental data. Applications of blood vessel constitutive models are also briefly presented, followed by the identification of future directions in research.

Arteries in vivo are subjected to large longitudinal stretch which may change significantly due to vascular disease and surgery. However, little is known about the effect of longitudinal stretch on vascular function and wall remodeling, although the effects of tensile and shear stress from blood pressure and flow have been well documented. To study the effect of longitudinal stretch on vascular function and wall remodeling, porcine carotid arteries were longitudinally stretched 20% more than in vivo for 5 days while being maintained in an ex vivo organ culture system under conditions of pulsatile flow at physiologic pressure. Vessel viability was demonstrated by strong vasomotor responses to norepinephrine (NE, 10(-6) M), carbachol (10(-6) M), and sodium nitroprusside (10(-5) M), as well as by dense staining for mitochondrial activity and a low occurrence of cell necrosis. Cell proliferation was examined by incorporation of bromodeoxyuridine (BrdU). Results showed that arteries maintain normal structure and viability after 5 days in organ culture. Both the stretched and control arteries demonstrated significant contractile responses. For example, both stretched and control arteries showed approximately 10% diameter contraction in response to NE. Stretched arteries contained 8% BrdU-positive cells compared to 5% in controls (p<0.05). These results indicate that longitudinal stretch promotes cell proliferation in arteries while maintaining arterial function.

No abstract

A nonlinear three-dimensional thick-wall model with fluid-structure interactions is introduced to simulate blood flow in carotid arteries with an asymmetric stenosis to quantify the effects of stenosis severity, eccentricity, and pressure conditions on blood flow and artery compression (compressive stress in the wall). Mechanical properties of the tube wall are measured using a thick-wall stenosis model made of polyvinyl alcohal hydrogel whose mechanical properties are close to that of carotid arteries. A hyperelastic Mooney-Rivlin model is used to implement the experimentally measured nonlinear elastic properties of the tube wall. A 36.5% pre-axial stretch is applied to make the simulation physiological. The Navier-Stokes equations in curvilinear form are used for the fluid model. Our results indicate that severe stenosis causes critical flow conditions, high tensile stress, and considerable compressive stress in the stenosis plaque which may be related to artery compression and plaque cap rupture. Stenosis asymmetry leads to higher artery compression, higher shear stress and a larger flow separation region. Computational results are verified by available experimental data.

An experimental technique was developed to determine the finite strain field in heterogeneous, diseased human aortic cross sections at physiologic pressures in vitro. Also, the distributions within the cross sections of four histologic features (disease-free zones, lipid accumulations, fibrous intimal tissue, and regions of calcification) were quantified using light microscopic morphometry. A model incorporating heterogeneous, plane stress finite elements coupled the experimental and histologic data. Tissue constituent mechanical properties were determined through an optimization strategy, and the distributions of stress and strain energy in the diseased vascular wall were calculated. Results show that the constituents of atherosclerotic lesions exhibit large differences in their bilinear mechanical properties. The distributions of stress and strain energy in the diseased vascular wall are strongly influenced by both lesion structure and composition. These results suggest that accounting for heterogeneities in the mechanical analysis of atherosclerotic arterial tissue is critical to establishing links between lesion morphology and the susceptibility of plaque to mechanical disruption in vivo.

Two-dimensional pseudoelastic mechanical properties of the canine pericardium were investigated in vitro. The pericardium was assumed to be orthotropic. The material symmetry axis was determined a priori and aligned with the stretching axis. Various biaxial stretching tests were then performed and a set of data covering a wide range of strains was constructed. This complete data set was fitted to a new exponential type constitutive model, and a set of true material constants was determined for each specimen. Using the constitutive model and the true material constants, the results from constant lateral force tests and constant lateral displacement tests were predicted and compared with experiment.

Although it has been recognized for many years that arteries in vivo exist under significant axial strain, studies of the adaptation of arteries to elevated axial strain have only recently been conducted. To determine the effects of sustained elevation of axial loading on arterial structure and function, axial stresses of 250 kPa or greater were applied to porcine common carotid arteries maintained in a perfusion organ culture system for 7 days at physiologic pressure and flow conditions. Our results demonstrated that axial stretch could lead to an increase in unloaded length that was proportional to the axial stretch ratio (stretched length divided by unloaded length) when the axial stretch ratio was above a threshold value of 2.14. Below this threshold, no significant length change occurred. Above this threshold, a significant increase in unloaded length (13 +/- 7%,) and the number of smooth muscle cell nuclei (20 +/- 7%) was observed. Permanent length change was associated with a significant decrease in axial stiffness, and the maximum elongation achieved was limited by rupture of the arterial wall. All tested arteries demonstrated good viability and strong vasomotor responses. These results show that arteries in organ culture can elongate under sustained axial loading.