No abstract

No abstract

An in situ polycondensation approach was applied to functionalize multiwalled carbon nanotubes (MWNTs), resulting in various linear or hyperbranched polycondensed polymers [e.g., polyureas, polyurethanes, and poly(urea-urethane)-bonded carbon nanotubes]. The quantity of the grafted polymer can be easily controlled by the feed ratio of monomers. As a typical example, the polyurea-functionalized MWNTs were measured and characterized in detail. The oxidized MWNTs (MWNT-COOH) were converted into acyl chloridefunctionalized MWNTs (MWNT-COCl) by reaction with neat thionyl chloride (SOCl 2 ). MWNT-COCl was reacted with excess 1,6-diaminohexane, affording amino-functionalized MWNTs (MWNT-NH 2 ). In the presence of MWNT-NH 2 , the polyurea was covalently coated onto the surfaces of the nanotube by in situ polycondensation of diisocyanate [e.g., 4,4′-methylenebis(phenylisocyanate)] and 1,6-diaminohexane, followed by the removal of free polymer via repeated filtering and solvent washing. The coated polyurea content can be controlled to some extent by adjusting the feed ratio of the isocyanato and amino groups. The structure and morphology of the resulting nanocomposites were characterized by FTIR, NMR, Raman, confocal Raman, TEM, EDS, and SEM measurements. The polyurea-coated MWNTs showed interesting self-assembled flator flowerlike morphologies in the solid state. The signals corresponding to that of the D and G bands of the carbon nanotubes were strongly attenuated after polyurea was chemically tethered to the MWNT surfaces. Comparative experiments showed that the grafted polymer species and structures have a strong effect on the Raman signals of polymer-functionalized MWNTs.

No abstract

The extensive oxygen-group functionality of single-layer graphene oxide proffers useful anchor sites for chemical functionalization in the controlled formation of graphene architecture and composites. However, the physicochemical environment of graphene oxide and its single-atom thickness facilitate its ability to undergo conformational changes due to responses to its environment, whether pH, salinity, or temperature. Here, we report experimental and molecular simulations confirming the conformational changes of single-layer graphene oxide sheets from the wet or dry state. MD, PM6, and ab initio simulations of dry SLG and dry and wetted SLGO and electron microscopy imaging show marked differences in the properties of the materials that can explain variations in previously observed results for the pH dependent behavior of SLGO and electrical conductivity of chemically modified graphene-polymer composites. Understanding the physicochemical responses of graphene and graphene oxide architecture and performing selected chemistry will ultimately facilitate greater tunability of their performance.

No abstract

In this paper, a systematic study of large-scale production of highly crystalline W18O49 nanoneedles with high aspect ratios using a simple tungsten metal reacting with water at 800−1000 °C has been described. By altering the W source and other experimental conditions, we have generated W18O49 crystals with diverse morphologies, and needles with desired dimensions are achieved. The quality nanoneedles provide ideal samples for further property investigations. Possible growth mechanisms are discussed.

Single-layer graphene oxides (SLGOs) undergo morphological changes depending on the pH of the system and may account for restricted chemical reactivity. Herein, SLGO may also capture nanoparticles through layering and enveloping when the pH is changed, demonstrating potential usefulness in drug delivery or waste material capture.