No abstract

No abstract

a b s t r a c tThe BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well was an integral part of an ongoing project to determine the future energy resource potential of gas hydrates on the Alaska North Slope. As part of this effort, the Mount Elbert well included an advanced downhole geophysical logging program. Because gas hydrate is unstable at ground surface pressure and temperature conditions, a major emphasis was placed on the downhole-logging program to determine the occurrence of gas hydrates and the in-situ physical properties of the sediments. In support of this effort, well-log and core data montages have been compiled which include downhole log and core-data obtained from the gashydrate-bearing sedimentary section in the Mount Elbert well. Also shown are numerous reservoir parameters, including gas-hydrate saturation and sediment porosity log traces calculated from available downhole well log and core data.Published by Elsevier Ltd.

a b s t r a c tThe Gulf of Mexico Gas Hydrates Joint Industry Project (JIP) is a consortium of production and service companies and some government agencies formed to address the challenges that gas hydrates pose for deepwater exploration and production. In partnership with the U.S. Department of Energy and with scientific assistance from the U.S. Geological Survey and academic partners, the JIP has focused on studies to assess hazards associated with drilling the fine-grained, hydrate-bearing sediments that dominate much of the shallow subseafloor in the deepwater (>500 m) Gulf of Mexico. In preparation for an initial drilling, logging, and coring program, the JIP sponsored a multi-year research effort that included: (a) the development of borehole stability models for hydrate-bearing sediments; (b) exhaustive laboratory measurements of the physical properties of hydrate-bearing sediments; (c) refinement of new techniques for processing industry-standard 3-D seismic data to constrain gas hydrate saturations; and (d) construction of instrumentation to measure the physical properties of sediment cores that had never been removed from in situ hydrostatic pressure conditions. Following review of potential drilling sites, the JIP launched a 35-day expedition in Spring 2005 to acquire well logs and sediment cores at sites in Atwater Valley lease blocks 13/14 and Keathley Canyon lease block 151 in the northern Gulf of Mexico minibasin province. The Keathley Canyon site has a bottom simulating reflection at w392 m below the seafloor, while the Atwater Valley location is characterized by seafloor mounds with an underlying upwarped seismic reflection consistent with upward fluid migration and possible shoaling of the base of the gas hydrate stability (BGHS). No gas hydrate was recovered at the drill sites, but logging data, and to some extent cores, suggest the occurrence of gas hydrate in inferred coarser-grained beds and fractures, particularly between 220 and 330 m below the seafloor at the Keathley Canyon site. This paper provides an overview of the results of the initial phases of the JIP work and introduces the 15 papers that make up this special volume on the scientific results related to the 2005 logging and drilling expedition.Published by Elsevier Ltd.

Physical properties of hydrate-bearing sediments are often correlated with hydrate saturation with little or no information on hydrate distribution uniformity in the specimens. This study focuses on water redistribution and sediment skeleton shift depending on various hydrate formation conditions in unsaturated systems, as well as on the resulting hydrate distribution patterns. Using X-ray computed tomography, we investigate the factors such as fines content and the pressure-temperature path on mass migration during carbon dioxide hydrate formation. The experiments show water migration, preferential hydrate formation toward the core periphery, localized patchy hydrate distribution, and sediment particle movement toward the core center. Sediment particle movement can be impeded in densely packed specimens. The overall mass migration due to hydrate formation can be significantly suppressed by adding 5% by mass of kaolinite. Hydrate formation initiated by pressurization and then cooling causes less mass migration than the cases where hydrate is formed using cooling followed by pressurization or pressurizing frozen cores followed by heating methods. Freezing can induce water migration and particle pushing in a similar manner as hydrate formation. Image analyses show that the pressure-temperature path and the rates of heat transfer during hydrate nucleation and growth govern the uniformity of hydrate distribution in sediments.