Polyurethanes (PUs) are widely used in different applications, and thus various synthetic procedures including one or more catalysts are applied to prepare them. For PU foams, the most important catalysts are nitrogen-containing compounds. Therefore, in this work, the catalytic effect of eight different nitrogen-containing catalysts on urethane formation will be examined. The reactions of phenyl isocyanate (PhNCO) and methanol without and in the presence of catalysts have been studied and discussed using the G3MP2BHandHLYP composite method. The solvent effects have also been considered by applying the SMD implicit solvent model. A general urethane formation mechanism has been proposed without and in the presence of the studied catalysts. The proton affinities (PA) were also examined. The barrier height of the reaction significantly decreased (∆E0 > 100 kJ/mol) in the presence of the studied catalysts, which proves the important effect they have on urethane formation. The achieved results can be applied in catalyst design and development in the near future.
Industrially relevant phosgenation mechanisms of 2,4-toluenediamine (2,4-TDA) were investigated using G3MP2B3 model chemistry. Six reaction pathways had been explored, which resulted in the formation of toluene diisocyanate (2,4-TDI) including different scenarios of the ‘phosgenations first’ and ‘consecutive phosgenations’ mechanisms in both gas and condensed phases. Two possible ‘phosgenations first’ mechanisms show superior to the others in terms of energy, regardless of which phases are considered. Due to the o-dichlorobenzene (ODCB) solvation, the reaction barriers are dramatically reduced compared to the gas-phase reaction mechanism and the solvent effect can be described by linear relationship. Standard enthalpy of formation value was also recommended for 2,4-TDA (59.3 kJ/mol) and 2,4-TDI (−94.1 kJ/mol), as well as for the gas-phase intermediates (IM).
Indigenous resources for natural and artificial mineral admixtures with high pozzolanic reactivity have been employed in many countries around the world. Extensive studies have been conducted for this purpose. With the use of agricultural waste residue, apart from improving properties of concrete, main benefits come from saving natural resources and energy, as well as protecting the environment by using these mineral admixtures (agroagricultural waste). The effective level of blending Portland cement (PC) in mortar or concrete with such mineral admixtures depends on many factors, such as the type of admixture and the cement replacement level. In the present paper two types of agroagricultural waste residue, namely, rice husk ash, bagasse ash and byproduct from thermal waste and fly ash were used. The above mentioned admixtures were thermally treated at a temperature of 650∘C. Characterizations of mineral admixtures were carried out by FTIR and XRD, and Microstructural properties were evaluated in concrete and mortar with partially replacement levels varying from 5% to 30%. Various tests such as water absorption, bulk volume of the specimen, dry weight of the specimen saturated mass, and coefficient of water absorption were concluded. The results showed that as the percentage of replacement level increases in the entire three admixtures studied, water absorption also increased.
Plastic waste has become a major global environmental concern. The utilization of solid waste-derived porous carbon for energy storage has received widespread attention in recent times. Herein, we report the comparison of electrochemical performance of porous carbon foams (CFs) produced from waste polyurethane (PU) elastomer templates via two different activation pathways. Electric double-layer capacitors (EDLCs) fabricated from the carbon foam exhibited a gravimetric capacitance of 74.4 F/g at 0.1 A/g. High packing density due to the presence of carbon spheres in the hierarchical structure offered excellent volumetric capacitance of 134.7 F/cm3 at 0.1 A/g. Besides, the CF-based EDLCs exhibited Coulombic efficiency close to 100% and showed stable cyclic performance for 5000 charge–discharge cycles with good capacitance retention of 97.7% at 3 A/g. Low equivalent series resistance (1.05 Ω) and charge transfer resistance (0.23 Ω) due to the extensive presence of hydroxyl functional groups contributed to attaining high power (48.89 kW/kg). Based on the preferred properties such as high specific surface area, hierarchical pore structure, surface functionalities, low metallic impurities, high conductivity and desirable capacitive behaviour, the CF prepared from waste PU elastomers have shown potential to be adopted as electrodes in EDLCs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.