The Ni-B-Mo coating on steel by electroless plating and the evaluation of the morphology and corrosion performance after applying heat treatments at different temperatures for 1 h were investigated in this study. The 25-lm-thick coating was uniform and adhesion between the substrate and the coating was good. The coating consisted of an amorphous-like structure in their as-plated condition, and after annealing at 400°C for 1 h, crystallized nickel, nickel borides, and molybdenum carbide were formed. Immersion tests in 10% HCl solution and potentiodynamic polarization measurements in 3.5% NaCl aqueous solution were applied to investigate corrosion resistance. The corrosion performance of heat-treated coatings was compared with steel and the as-plated coating. By increasing the annealing temperature, corrosion potential shifted toward a noble direction, corrosion current density decreased and the weight loss of specimens decreased, demonstrating an increase in corrosion resistance. Best corrosion performance was achieved by the coating heat treated at 550°C .
The present work deals with the formation of Ni-B-W coating on steel by electroless plating process and evaluation of their corrosion resistance after applying heat treatments at different temperatures for 1 h. The Ni-B-W coating was prepared using alkaline borohydride- reduced electroless nickel bath. Scanning electron microscopy of the surface cross-sectional view of the electroless Ni-B-W coating was analyzed and layer characteristics was investigated. Coating structure was investigated using XRD. The study reveals that the Ni-B-W coating is amorphous in their as-plated condition and upon heat treatment at 400 0C for 1 h, Ni-B-W coating crystallize and produce nickel and nickel borides in the coatings. Annealing temperature dependence of the corrosion resistance of the coating was investigated by potentiodynamic polarisation measurements. These results show that the Ni–B-W coating annealed at 650 0C exhibit better corrosion resistance than those of coatings with other annealing temperature. The corrosion resistance increased after the crystallisation of the coating, due to factors like; decrease of porosity and internal stress and the formation of tungsten oxide on the surface acting as a protective layer.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.