Surfaces with antibacterial and hydrophilic properties are very attractive to cardiovascular applications. The objective of this study was to synthesize and immobilize a novel antibacterial and hydrophilic polymer onto surface of polyvinylchloride via an effective and mild surface coating technique. The surface coated with a terpolymer constructed with N‐vinylpyrrolidone, 3,4‐dichloro‐5‐hydroxy‐2(5H)‐furanone derivative, and succinimide residue was evaluated with cell adhesion, bacterial adhesion, and bacterial viability. 3T3 mouse fibroblast cells and two bacteria species were used to evaluate surface adhesion and antibacterial activity. Results showed that the polymer‐modified polyvinylchloride surface exhibited not only significantly decreased 3T3 fibroblast cell adhesion with a 66% to 87% reduction but also significantly decreased bacterial adhesion with 69% to 87% and 52% to 74% reduction of Pseudomonas aeruginosa and Staphylococcus aureus attachment, respectively, as compared with original polyvinylchloride. Furthermore, the modified polyvinylchloride surfaces exhibited significant antibacterial functions by inhibiting bacterial growth (75%‐84% and 78–94% inhibition of P aeruginosa and S aureus, respectively, as compared to original polyvinylchloride) and killing bacteria. These results demonstrate that covalent polymer attachment conferred antifouling and antibacterial properties to the polyvinylchloride surface.
A novel antibacterial resin composite has been developed and evaluated. Glycerol dimethacrylate was derivatized to have an antibacterial moiety attached and incorporated to a conventional resin composite formulation. Compressive strength and bacterial viability were used to evaluate the modified resin composites. Results showed that the modified resin composites showed a significantly enhanced antibacterial activity along with improved mechanical and physical properties. It was found that bromine-containing resin composite showed a higher antibacterial activity than its chlorine-containing counterpart. The modified resin composites showed an increase of 37–41% in yield strength, 23–27% in modulus, 9–15% in diametral tensile strength and 5–12% in flexural strength and a decrease of 35–69% in bacterial viability, 20–37% in water sorption, 7–12% in shrinkage and 7–10% in compressive strength, as compared to unmodified resin composite. Within the limitations of this study, the modified resin composite may potentially be developed into a clinically useful dental restorative since it demonstrated good mechanical strengths and potent antibacterial function.
Antimicrobial surface is important for the inhibition of bacteria or biofilm formation on biomaterials. The objective of this study was to immobilize a novel hydrophilic polymer containing the antibacterial moiety onto polyurethane surface via a simple surface coating technology to make the surface not only antibacterial but also antifouling. The compound 3,4-dichloro-5-hydroxy-2(5H)-furanone was derivatized, characterized and incorporated onto polyvinylpyrrolidone containing succinimidyl functional groups, followed by coating onto the polyurethane surface. Contact angle, antibacterial function and protein adsorption of the modified surface were evaluated. The result shows that the modified surface exhibited significantly enhanced hydrophilicity with a 54-65% decrease in contact angle, increased antibacterial activity to Staphylococcus aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa with a 24-57% decrease in viability, and reduced human serum albumin adsorption with a 64-70% decrease in adsorption, as compared to the original polyurethane.
Hydrophilic polymers are very useful in biomedical applications. In this study, biocompatible polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) polymers end-capped with succinimidyl groups were either modified or synthesised and attached to polyvinylchloride surfaces. The modified surfaces were evaluated with cell adhesion and bacterial adhesion. 3T3 mouse fibroblast cells and three bacteria species were used to evaluate surface adhesion activity. Results showed that the modified surface exhibited significantly reduced 3T3 cell adhesion with a 50%-69% decrease for PEG and a 64%-81% for PVP, as compared to unmodified polyvinylchloride. The modified surface also showed significantly reduced bacterial attachment with 22%-78%, 18%-76% and 20%-75% decrease for PEG and 22%-76%, 18%-76% and 20%-73% for PVP to Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, respectively, as compared to unmodified polyvinylchloride. It seems that an appropriate chain length or molecular weight (neither the longest nor the shortest chain length) determines the lowest cell and bacterial adhesion in terms of PEG. On the other hand, a mixture of polymers with different chain lengths exhibited the lowest cell and bacterial adhesion in terms of PVP.
Surfaces with hydrophilic and antimicrobial properties are very attractive for cardiovascular device-associated applications. The aim of this study was to prepare and coat a hydrophilic polymer containing a functional group capable of forming triazole functionality onto the surface of polyurethane (PU). The modified surfaces were assessed with cell adhesion, bacterial adhesion and bacterial viability. Mouse fibroblast cells (NIH-3T3) and three bacterial species were used for assessment. The results showed that the modified surface not only exhibited a significant reduction in cell adhesion with a 25%-59% decrease to mouse fibroblast but also showed a significant reduction in bacterial attachment with 26%-67%, 24%-61% and 23%-57% decrease to Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, respectively, as compared with original PU. Furthermore, the polymer-modified surface exhibited a significant antibacterial function by inhibiting bacterial growth with reduction of 49%-84%, 44%-79% and 53%-79% to S. aureus, E. coli and P. aeruginosa, respectively, as compared with original PU. These results indicate that covalent polymer attachment enhanced the antibacterial and antifouling properties of the PU surface.
K E Y W O R D S bacterial adhesion and inhibition, cell adhesion, polymer coating, polyurethaneThis is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
A new BisGMA-based antibacterial dental composite has been formulated and evaluated. Compressive strength and bacterial viability were utilized to evaluate the formed composites. It was found that the new composite exhibited a significantly enhanced antibacterial function along with improved mechanical and physical properties. The bromine-containing derivative-modified composite was more potent in antibacterial activity than the chlorine-containing composite. The modified composites also exhibited an increase of 30–53% in compressive yield strength, 15–30% in compressive modulus, 15–33% in diametral tensile strength and 6–20% in flexural strength, and a decrease of 57–76% in bacterial viability, 23–37% in water sorption, 8–15% in shrinkage, 8–13% in compressive strength, and similar degree of conversion, than unmodified composite. It appears that this experimental composite may possibly be introduced to dental clinics as an attractive dental restorative due to its improved properties as well as enhanced antibacterial function.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.