No abstract

No abstract

This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Aalto University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubspermissions@ieee.org.By choosing to view this document, you agree to all provisions of the copyright laws protecting it. This paper proposes an effective method of analyzing the eddy-current loss within the end shield and frame of an electric machine. The standard impedance boundary condition is applied to the conducting surfaces of complete 3-D models, and the models are solved by time-harmonic finite-element analyses. Measurement of the temperature rise is completed as a validation of the proposed method. The effect of the distances between the conducting surfaces and coil ends is studied by computing the eddy-current loss for a series of 3-D models having different distances. In addition, simplified 2-D models are used to study the influence of material nonlinearity. In brief, the proposed method is feasible in computing the eddy-current loss. The eddy-current loss within the regions close to the coil ends is larger than the other regions in the end shield and frame, but the total loss is quite small, compared, for instance, with the copper loss within the stator winding. Furthermore, the farther the end shield and frame are from the coil ends, the smaller the eddy-current loss is. Finally, it is found that the eddy-current loss is larger in the nonlinear case than in the linear case.

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

No abstract