ZnO has several potential applications into its credit. This review article focuses on the influence of processing parameters involved during the synthesis of ZnO nanoparticles by sol-gel method. During the sol-gel synthesis technique, the processing parameters/experimental conditions can affect the properties of the synthesized material. Processing parameters are the operating conditions that are to be kept under consideration during the synthesis process of nanoparticles so that various properties exhibited by the resulting nanoparticles can be tailored according to the desired applications. Effect of parameters like pH of the sol, additives used (like capping agent, surfactant), the effect of annealing temperature and calcination on the morphology and the optical properties of ZnO nanoparticles prepared via sol-gel technique is analyzed in this study. In this study, we tried to brief the experimental investigations done by various researchers to analyze the influence of processing parameters on ZnO nanoparticles. This study will provide a platform to understand and establish a correlation between the experimental conditions and properties of ZnO nanoparticles prepared through sol-gel route which will be helpful in meeting the desired needs in various application areas.

Lead halide perovskites have displayed the highest solar power conversion efficiencies of 23% but the toxicity issues of these materials need to be addressed. Lead‐free perovskites have emerged as viable candidates for potential use as light harvesters to ensure clean and green photovoltaic technology. The substitution of lead by Sn, Ge, Bi, Sb, Cu and other potential candidates have reported efficiencies of up to 9%, but there is still a dire need to enhance their efficiencies and stability within the air. A comprehensive review is given on potential substitutes for lead‐free perovskites and their characteristic features like energy bandgaps and optical absorption as well as photovoltaic parameters like open‐circuit voltage (VOC), fill factor, short‐circuit current density (J SC), and the device architecture for their efficient use. Lead‐free perovskites do possess a suitable bandgap but have low efficiency. The use of additives has a significant effect on their efficiency and stability. The incorporation of cations like diethylammonium, phenylethyl ammonium, phenylethyl ammonium iodide, etc., or mixed cations at different compositions at the A‐site is reported with engineered bandgaps having significant efficiency and stability. Recent work on the advancement of lead‐free perovskites is also reviewed.

The development of solution-processed photovoltaic (PV) devices for indoor applications has recently attracted widespread attention owing to their outstanding potential in harvesting energy efficiently for low-power-consumption electronic devices, such as...

No abstract

Naphthalene diimide−bithiophene P(NDI2OD-T2) is a well-known donor−acceptor polymer, previously explored as n-type material in all-polymer solar cells (all-PSCs) and organic field effect transistor (OFETs) applications. The optical, bulk, electrochemical, and semiconducting properties of P(NDI2OD-T2) polymer were tuned via random incorporation of perylene diimide (PDI) as coacceptor with naphthalene diimide (NDI). Three random copolymers containing 2,2′-bithiophene as donor unit and varying compositions of naphthalene diimide (NDI) and perylene diimide (xPDI, x = 15, 30, and 50 mol % of PDI) as two mixed acceptors were synthesized by Stille coupling copolymerization. Proton NMR spectra recorded in CDCl 3 showed that the π−π stacking induced aggregation among the naphthalene units could be successfully disrupted by the random incorporation of bulky PDI units. The newly synthesized random copolymers were investigated as electron acceptors in BHJ all-PSCs, and their performance was compared with P(NDI2OD-T2) as reference polymer. An enhanced PCE of 5.03% was observed for BHJ all-PSCs (all-polymer solar cells) fabricated using NDI-Th-PDI30 as acceptor and PTB7-Th as donor, while the reference polymer blend with the same donor polymer exhibited PCE of 2.97% efficiency under similar conditions. SCLC bulk carrier mobility measured for blend devices showed improved charge mobility compared to reference polymer, with PTB7-Th:NDI-Th-PDI30 blend device exhibiting the high hole and electron mobility of 4.2 × 10 −4 and 1.5 × 10 −4 cm 2 /(V s), respectively. This work demonstrates the importance of molecular design via random copolymer strategy to control the bulk crystallinity, compatibility, blend morphology, and solar cell performance of n-type copolymers.

No abstract

No abstract

Switching bithiophene for thienothiophene reduces the number of rotational conformations, facilitating self-assembly with minimal effects on the electronic structure.