This study considered the impacts of diesel–soybean biodiesel blends mixed with 3% cerium coated zinc oxide (Ce-ZnO) nanoparticles on the performance, emission, and combustion characteristics of a single cylinder diesel engine. The fuel blends were prepared using 25% soybean biodiesel in diesel (SBME25). Ce-ZnO nanoparticle additives were blended with SBME25 at 25, 50, and 75 ppm using the ultrasonication process with a surfactant (Span 80) at 2 vol.% to enhance the stability of the blend. A variable compression ratio engine operated at a 19.5:1 compression ratio (CR) using these blends resulted in an improvement in overall engine characteristics. With 50 ppm Ce-ZnO nanoparticle additive in SBME25 (SBME25Ce-ZnO50), the brake thermal efficiency (BTE) and heat release rate (HRR) increased by 20.66% and 18.1%, respectively; brake specific fuel consumption (BSFC) by 21.81%; and the CO, smoke, and hydrocarbon (HC) decreased by 30%, 18.7%, and 21.5%, respectively, compared to SBME25 fuel operation. However, the oxides of nitrogen slightly rose for all the nanoparticle added blends. As such, 50 ppm of Ce-ZnO nanoparticle in the blend is a potent choice for the enhancement of engine performance, combustion, and emission characteristics.

The present investigation is directed towards synthesis of zinc oxide (ZnO) nanoparticles and steady blending with soybean biodiesel (SBME25) to improve the fuel properties of SBME25 and enhance the overall characteristics of a variable compression ratio diesel engine. The soybean biodiesel (SBME) was prepared using the transesterification reaction. Numerous characterization tests were carried out to ascertain the shape and size of zinc oxide nanoparticles. The synthesized asymmetric ZnO nanoparticles were dispersed in SBME25 at three dosage levels (25, 50, and 75 ppm) with sodium dodecyl benzene sulphonate (SDBS) surfactant using the ultrasonication process. The quantified physicochemical properties of all the fuels blends were in symmetry with the American society for testing and materials (ASTM) standards. Nanofuel blends demonstrated enhanced fuel properties compared with SBME25. The engine was operated at two different compression ratios (18.5 and 21.5) and a comparison was made, and best fuel blend and compression ratio (CR) were selected. Fuel blend SBME25ZnO50 and compression ratio (CR) of 21.5 illustrated an overall enhancement in engine characteristics. For SBME25ZnO50 and CR 21.5 fuel blend, brake thermal efficiency (BTE) increased by 23.2%, brake specific fuel consumption (BSFC) were reduced by 26.66%, and hydrocarbon (HC), CO, smoke, and CO2 emissions were reduced by 32.234%, 28.21% 22.55% and 21.66%, respectively; in addition, the heat release rate (HRR) and mean gas temperature (MGT) improved, and ignition delay (ID) was reduced. In contrast, the NOx emissions increased for all the nanofuel blends due to greater supply of oxygen and increase in the temperature of the combustion chamber. At a CR of 18.5, a similar trend was observed, while the values of engine characteristics were lower compared with CR of 21.5. The properties of nanofuel blend SBME25ZnO50 were in symmetry and comparable to the diesel fuel.

The present study examines the effect of silicon dioxide (SiO2) nano-additives on the performance and emission characteristics of a diesel engine fuelled with soybean biodiesel. Soybean biofuel was prepared using the transesterification process. The morphology of nano-additives was studied using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS). The Ultrasonication process was used for the homogeneous blending of nano-additives with biodiesel, while surfactant was used for the stabilisation of nano-additives. The physicochemical properties of pure and blended fuel samples were measured as per ASTM standards. The performance and emissions characteristics of different fuel samples were measured at different loading conditions. It was found that the brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) increased by 3.48–6.39% and 5.81–9.88%, respectively, with the addition of SiO2 nano-additives. The carbon monoxide (CO), hydrocarbon (HC) and smoke emissions for nano-additive added blends were decreased by 1.9–17.5%, 20.56–27.5% and 10.16–23.54% compared to SBME25 fuel blends.

The present study examines the effect of SiO2 nano-additives on the performance and emission characteristics of a diesel engine fuelled with soybean biodiesel. Soybean biofuel was prepared using the transesterification process. Nano-additives characterisations were done using different tests such as FESEM, XRD, EDS, etc., to study the morphology of nano-additives. For proper blending of nano-additives with biodiesel, the ultrasonication process was used. Surfactant was used for the stabilisation of nano-additives. After making all the combinations of nano fuel blends, physicochemical properties were measured as per ASTM standards. Performance and emissions readings were taken at different load conditions. It was found that with the addition of SiO2 nano-additives, brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) was increased by 3.48-6.39% and 5.81-9.88%, respectively. Significant reduction of CO, CO2, NOx, and smoke emissions were also observed compared to baseline fule due to better combustion efficiency with the use of SiO2 nano-additive.

No abstract

In the present study, the effects of soybean biodiesel (SB)-diesel blends containing 1% strontium (Sr) doped zinc oxide (ZnO) nanoparticles (NPs) on the performance and emission parameters of a variable compression ratio (VCR) engine were investigated. To make the fuel blends, 25% soybean biodiesel (SB25) was added to the diesel. To improve the blend's stability, Sr/ZnO NP additions were blended with SB25 at 50 and 75 ppm utilizing an ultrasonication method and a surfactant at 2%. Various physicochemical techniques, such as X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and ultraviolet spectroscopy, were used to characterize the produced NPs. These blends improved overall engine characteristics when used with a VCR. In comparison to the absence of nanoadditives, the brake thermal efficiency increased by 10.37% and the brake-specific fuel consumption decreased by 16.76% while using 50 ppm Sr/ZnO NPs additive in SB25 (SB25Sr/ZnO50).