The energy harvesting methods enable WSNs nodes to last potentially forever with the help of energy harvesting subsystems for continuously providing energy, and storing it for future use. The energy harvesting techniques can use various potential sources of energy, such as solar, wind, mechanical, and variations in temperature. Energy-constrained sensor nodes are small in size. Therefore, some mechanisms are required to reduce energy consumption and consequently to improve the network lifetime. The clustering mechanism is used for energy efficiency in WSNs. In the clustering mechanism, the group of sensor nodes forms the clusters. The performance of the clustering process depends on various factors such as the optimal number of clusters formation and the process of cluster head selection. In this paper, we propose a hybrid whale and grey wolf optimization (WGWO)-based clustering mechanism for energy harvesting wireless sensor networks (EH-WSNs). In the proposed research, we use two meta-heuristic algorithms, namely, whale and grey wolf to increase the effectiveness of the clustering mechanism. The exploitation and exploration capabilities of the proposed hybrid WGWO approach are much higher than the traditional various existing metaheuristic algorithms during the evaluation of the algorithm. This hybrid approach gives the best results. The proposed hybrid whale grey wolf optimization-based clustering mechanism consists of cluster formation and dynamically cluster head (CH) selection. The performance of the proposed scheme is compared with existing state-of-art routing protocols.

Clustering is a promising technique for optimizing energy consumption in sensor-enabled Internet of Things (IoT) networks. Uneven distribution of cluster heads (CHs) across the network, repeatedly choosing the same IoT nodes as CHs and identifying cluster heads in the communication range of other CHs are the major problems leading to higher energy consumption in IoT networks. In this paper, using fuzzy logic, bio-inspired chicken swarm optimization (CSO) and a genetic algorithm, an optimal cluster formation is presented as a Hybrid Intelligent Optimization Algorithm (HIOA) to minimize overall energy consumption in an IoT network. In HIOA, the key idea for formation of IoT nodes as clusters depends on finding chromosomes having a minimum value fitness function with relevant network parameters. The fitness function includes minimization of inter- and intra-cluster distance to reduce the interface and minimum energy consumption over communication per round. The hierarchical order classification of CSO utilizes the crossover and mutation operation of the genetic approach to increase the population diversity that ultimately solves the uneven distribution of CHs and turnout to be balanced network load. The proposed HIOA algorithm is simulated over MATLAB2019A and its performance over CSO parameters is analyzed, and it is found that the best fitness value of the proposed algorithm HIOA is obtained though setting up the parameters, number of rooster, number of hen’s and swarm updating frequency. Further, comparative results proved that HIOA is more effective than traditional bio-inspired algorithms in terms of node death percentage, average residual energy and network lifetime by 12%, 19% and 23%.

In-vehicle communication has become an integral part of today’s driving environment considering the growing add-ons of sensor-centric communication and computing devices inside a vehicle for a range of purposes including vehicle monitoring, physical wiring reduction, and driving efficiency. However, related literature on cyber security for in-vehicle communication systems is still lacking potential dedicated solutions for in-vehicle cyber risks. Existing solutions are mainly relying on protocol-specific security techniques and lacking an overall security framework for in-vehicle communication. In this context, this paper critically explores the literature on cyber security for in-vehicle communication focusing on technical architecture, methodologies, challenges, and possible solutions. In-vehicle communication network architecture is presented considering key components, interfaces, and related technologies. The protocols for in-vehicle communication have been classified based on their characteristics, and usage type. Security solutions for in-vehicle communication have been critically reviewed considering machine learning, cryptography, and port-centric techniques. A multi-layer secure framework is also developed as a protocol and use case-independent in-vehicle communication solution. Finally, open challenges and future dimensions of research for in-vehicle communication cyber security are highlighted as observations and recommendations.

In the last few years, the Internet of things (IoT) has recently gained attention in developing various smart city applications such as smart healthcare, smart supply chain, smart home, smart grid, etc. The existing literature focuses on the smart healthcare system as a public emergency service (PES) to provide timely treatment to the patient. However, little attention is given to a distributed smart fire brigade system as a PES to protect human life and properties from severe fire damage. The traditional PES are developed on a centralised system, which requires high computation and does not ensure timely service fulfilment. Furthermore, these traditional PESs suffer from a lack of trust, transparency, data integrity, and a single point of failure issue. In this context, this paper proposes a Blockchain-Enabled Secure and Trusted (BEST) framework for PES in the smart city environment. The BEST framework focuses on providing a fire brigade service as a PES to the smart home based on IoT device information to protect it from serious fire damage. Further, we used two edge computing servers, an IoT controller and a service controller. The IoT and service controller are used for local storage and to enhance the data processing speed of PES requests and PES fulfilments, respectively. The IoT controller manages an access control list to keep track of registered IoT gateways and their IoT devices, avoiding misguiding the PES department. The service controller utilised the queue model to handle the PES requests based on the minimum service queue length. Further, various smart contracts are designed on the Hyperledger Fabric platform to automatically call a PES either in the presence or absence of the smart-home owner under uncertain environmental conditions. The performance evaluation of the proposed BEST framework indicates the benefits of utilising the distributed environment and the smart contract logic. The various simulation results are evaluated in terms of service queue length, utilisation, actual arrival time, expected arrival time, number of PES departments, number of PES providers, and end-to-end delay. These simulation results show the effectiveness and feasibility of the BEST framework.

Recent years have witnessed rapid development and great indignation burgeoning in the unmanned aerial vehicles (UAV) field. This growth of UAV-related research contributes to several challenges, including inter-communication from vehicle to vehicle, transportation coverage, network information gathering, network interworking effectiveness, etc. Due to ease of usage, UAVs have found novel applications in various areas such as agriculture, defence, security, medicine, and observation for traffic-monitoring applications. This paper presents an innovative drone system by designing and developing a blended-wing-body (BWB)-based configuration for next-generation drone use cases. The proposed method has several benefits, including a very low interference drag, evenly distributed load inside the body, and less radar signature compared to the state-of-the-art configurations. During the entire procedure, a standard design approach was followed to optimise the BWB framework for next-generation use cases by considering the typically associated parameters such as vertical take-off and landing and drag and stability of the BWB. Extensive simulation experiments were performed to carry out a performance analysis of the proposed model in a software-based environment. To further confirm that the model design of the BWB-UAV is fit to execute the targeted missions, the real-time working environments were tested through advanced numerical simulation and focused on avoiding cost and unwanted wastages. To enhance the trustworthiness of this said computational fluid dynamics (CFD) analysis, grid convergence test-based validation was also conducted. Two different grid convergence tests were conducted on the induced velocity of the Version I UAV and equivalent stress of the Version II UAV. Finite element analysis-based computations were involved in estimating structural outcomes. Finally, the mesh quality was obtained as 0.984 out of 1. The proposed model is very cost-effective for performing a different kind of manoeuvring activities with the help of its unique design at reasonable mobility speed and hence can be modelled for high-speed-based complex next-generation use cases.

Introduction: Patients of febrile thrombocytopenia increase during monsoon and post-monsoon period. Diseases like dengue fever, malaria, chikungunya fever, etc. are responsible for the clustering of febrile thrombocytopenia cases during this period. The diagnosis of fever with thrombocytopenia cases can be challenging and physicians should be aware of the regional and endemic seasonal cause of this syndrome. Study Design: Prospective observational study. Material and Methods: The study included 100 consecutive patients. The patients admitted with acute febrile illness defined by a duration less than 2 weeks with thrombocytopenia were evaluated. Results: The present study included 103 consecutive cases of febrile thrombocytopenia. Out of these, 71.84% were male and 28.16% were female. The most common etiology for febrile thrombocytopenia was dengue fever (44.66%) and malaria (31.06%). Among clinical evaluation of the cases, fever was the inclusion criteria. Myalgia was the most common symptom found after fever, which was observed in 83.5% of the patients. The most common bleeding manifestation was petechiae/purpura (12.62%) followed by hematuria (6.80%). Renal dysfunction was present in all 8(100%) cases of sepsis, followed by 14(43.75%) cases of malaria. All sepsis cases also had Liver dysfunction, followed by 91.3% cases in dengue fever and 90.62 % cases in malaria had liver dysfunction. Conclusion: The study showed that acute febrile thrombocytopenia is an important seasonal syndrome. The common causes are dengue fever and malaria. Early identification of these diseases and prompt treatment decreases complications and reduces mortality.

Underwater sensor networks (UWSNs) have witnessed significant R&D attention in both academia and industry due to their growing application domains, such as border security, freight via sea or river, natural petroleum production and the fishing industry. Considering the deep underwater-oriented access constraints, energy-centric communication for the lifetime maximization of tiny sensor nodes in UWSNs is one of the key research themes in this domain. Existing literature on green UWSNs are majorly adapted from the existing techniques in traditional wireless sensor network relying on geolocation and the quality of service-centric underwater relay node selection, without paying much attention to the dynamic underwater network environments. To this end, this paper presents an adapted whale and wolf optimization-based energy and delay-centric green underwater networking framework (W-GUN). It focuses on exploiting dynamic underwater network characteristics by effectively utilizing underwater whale-centric optimization in relay node selection. Firstly, an underwater relay node optimization model is mathematically derived, focusing on underwater whale dynamics for incorporating realistic underwater characteristics in networking. Secondly, the optimization model is used to develop an adapted whale and grey wolf optimization algorithm for selecting optimal and stable relay nodes for centric underwater communication paths. Thirdly, a complete workflow of the W-GUN framework is presented with an optimization flowchart. The comparative performance evaluation attests to the benefits of the proposed framework and is compared to state-of-the-art techniques considering various metrics related to underwater network environments.Sensors 2020, 20, 1377 2 of 23 water-based transport applications [6,7], oil, and natural gas production applications [8,9], and developing fishing-centric industries [10,11]. In underwater networking, tiny sensor nodes are deployed underwater, as well as on the upper surface layer for monitoring the specific underwater area [12]. These underwater nodes communicate with the surface nodes, acting as access points or cluster heads for reaching the sink node of the network, which accumulates the information and communicates with the cloud-enabled computing resources [13]. Underwater networking is significantly challenging compared to traditional wireless networking due to the dynamic self-mobility of the medium of communication and constraints in signal propagation in the underwater environment [14][15][16]. In this constrained networking environment, the underwater network deployment-oriented challenges further complicate scientific investigations towards the development of an energy-centric green underwater network for various application domains [17][18][19].Towards enabling green underwater networking, several service and geolocation-centric techniques of varying quality have been suggested [20,21]. A heuristic approach has been suggested in underwater networking for solving the surface gateway deployment o...

No abstract