ABSTRACT:The morphology and properties of polypropylene (PP)/clay nanocomposites are described. The melt intercalation of organophilic clay was carried out with a single-screw extruder. The effects of two kinds of treatments of clay are discussed. Maleic anhydride (MAH)-grafted PP was used as a compatibilizer. The expansion of the intergallery distance of the clay was governed by the interaction between the clay treatment and the compatibilizer. In one case, the composites exhibited significantly reduced intensities of diffraction peaks, suggesting partial exfoliation of the clay layers, whereas for the second clay sample, expansion of the gallery height was noted. The mechanical properties of the PP/clay composites showed significant enhancement in their mechanical and thermal properties. About a 35% increase in the tensile modulus and about a 10% increase in the tensile strength were observed. The thermal degradation temperature increased from 270 to about 400°C as a result of the incorporation of clay, and the extent depended on the dispersion of clay in the composite. The most interesting outcome of this study was the changes in morphology for PP/clay composites, which are reported here for the first time. An optical microscopic study revealed that the PP/clay composites could be crystallized at higher temperatures than pure PP and that the morphology was remarkably altered because of the presence of layers of clay.
Nanocomposites based on an amorphous copolyester, poly(ethylene glycol-co-cyclohexane-1,4dimethanol terephthalate) and carbon nanotubes were fabricated using a simple melt processing technique. The reinforcement effect of carbon nanotubes in the copolyester was investigated experimentally using different approaches based on dynamic mechanical analysis, rheology and dielectric analysis. The nanocomposites show a mechanical reinforcement effect with significant increase in the stiffness especially in the rubbery regime with increasing nanotube content. An increase in T g and a decrease in damping are seen, which are derived from the presence of a percolating superstructure of the filler. Rheological experiments show an increase in storage modulus up to four orders of magnitude. Viscolelastic characterization shows that the percolation threshold is at 3 wt% of nanotubes. Dielectric relaxation spectroscopy confirms the presence of this percolating structure. We conclude that the responses of both rheological and electrical properties are different, although both are related to the formation of a percolating network superstructure of the filler.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.