Metal−organic frameworks (MOFs) offer an attractive alternative to traditional hard and soft templates for nanocluster synthesis because their ordered crystalline lattice provides a highly controlled and inherently understandable environment. We demonstrate that MOFs are stable hosts for metal hydrides proposed for hydrogen storage and their reactive precursors, providing platform to test recent theoretical predictions that some of these materials can be destabilized with respect to hydrogen desorption by reducing their critical dimension to the nanoscale. With the MOF HKUST-1 as template, we show that NaAlH4 nanoclusters as small as eight formula units can be synthesized. The confinement of these clusters within the MOF pores dramatically accelerates the desorption kinetics, causing decomposition to occur at ∼100 °C lower than bulk NaAlH4. However, using simultaneous thermogravimetric modulated beam mass spectrometry, we also show that the thermal decomposition mechanism of NaAlH4 is complex and may involve processes such as nucleation and growth in addition to the normally assumed two-step chemical decomposition reactions.

We demonstrate that NaAlH(4) confined within the nanopores of a titanium-functionalized metal-organic framework (MOF) template MOF-74(Mg) can reversibly store hydrogen with minimal loss of capacity. Hydride-infiltrated samples were synthesized by melt infiltration, achieving loadings up to 21 wt %. MOF-74(Mg) possesses one-dimensional, 12 Å channels lined with Mg atoms having open coordination sites, which can serve as sites for Ti catalyst stabilization. MOF-74(Mg) is stable under repeated hydrogen desorption and hydride regeneration cycles, allowing it to serve as a "nanoreactor". Confining NaAlH(4) within these pores alters the decomposition pathway by eliminating the stable intermediate Na(3)AlH(6) phase observed during bulk decomposition and proceeding directly to NaH, Al, and H(2), in agreement with theory. The onset of hydrogen desorption for both Ti-doped and undoped nano-NaAlH(4)@MOF-74(Mg) is ∼50 °C, nearly 100 °C lower than bulk NaAlH(4). However, the presence of titanium is not necessary for this increase in desorption kinetics but enables rehydriding to be almost fully reversible. Isothermal kinetic studies indicate that the activation energy for H(2) desorption is reduced from 79.5 kJ mol(-1) in bulk Ti-doped NaAlH(4) to 57.4 kJ mol(-1) for nanoconfined NaAlH(4). The structural properties of nano-NaAlH(4)@MOF-74(Mg) were probed using (23)Na and (27)Al solid-state MAS NMR, which indicates that the hydride is not decomposed during infiltration and that Al is present as tetrahedral AlH(4)(-) anions prior to desorption and as Al metal after desorption. Because of the highly ordered MOF structure and monodisperse pore dimensions, our results allow key template features to be identified to ensure reversible, low-temperature hydrogen storage.

Reactive nanoparticles are of great interest for applications ranging from catalysis to energy storage. However, efforts to relate cluster size to thermodynamic stability and chemical reactivity are hampered by broad pore size distributions and poorly characterized chemical environments in many microporous templates. Metal hydrides are an important example of this problem. Theoretical calculations suggest that reducing their critical dimension to the nanoscale can in some cases considerably destabilize these materials and there is clear experimental evidence for accelerated kinetics, making hydrogen storage applications more attractive in some cases. However, quantitative measurements establishing the influence of size on thermodynamics are lacking, primarily because carbon aerogels often used as supports provide inadequate control over size and pore chemistry. Here, we employ the nanoporous metal-organic framework (MOF) Cu-BTC (also known as HKUST-1) as a template to synthesize and confine the complex hydride NaAlH(4). The well-defined crystalline structure and monodisperse pore dimensions of this MOF allow detailed, quantitative probing of the thermodynamics and kinetics of H(2) desorption from 1-nm NaAlH(4) clusters (NaAlH(4)@Cu-BTC) without the ambiguity associated with amorphous templates. Hydrogen evolution rates were measured as a function of time and temperature using the Simultaneous Thermogravimetric Modulated Beam Mass Spectrometry method, in which sample mass changes are correlated with a complete analysis of evolved gases. NaAlH(4)@Cu-BTC undergoes a single-step dehydrogenation reaction in which the Na(3)AlH(6) intermediate formed during decomposition of the bulk hydride is not observed. Comparison of the thermodynamically controlled quasi-equilibrium reaction pathways in the bulk and nanoscale materials shows that the nanoclusters are slightly stabilized by confinement, having an H(2) desorption enthalpy that is 7 kJ (mol H(2))(-1) higher than the bulk material. In addition, the activation energy for desorption is only 53 kJ (mol H(2))(-1), more than 60 kJ (mol H(2))(-1) lower than the bulk. When combined with first-principles calculations of cluster thermodynamics, these data suggest that although interactions with the pore walls play a role in stabilizing these particles, size exerts the greater influence on the thermodynamics and reaction rates.

Particle size and particle-framework interactions have profound effects on the kinetics, reaction pathways, and even thermodynamics of complex hydrides incorporated in frameworks possessing nanoscale features. Tuning these properties may hold the key to the utilization of complex hydrides in practical applications for hydrogen storage. Using carefully synthesized, highly-ordered, nanoporous carbons (NPCs), we have previously shown quantitative differences in the kinetics and reaction pathways of LiBH 4 when incorporated into the frameworks. In this paper, we probe the anion mobility of LiBH 4 confined in NPC frameworks by a combination of solid state NMR and quasielastic neutron scattering (QENS) and present some new insights into the nanoconfinement effect. NMR and QENS spectra of

Novel guanidinato complexes of hafnium [Hf{eta2-(iPrN)2CNR2}2(NR2)2] (R2 = Et2, 1; Et, Me, 2; Me2, 3), synthesized by insertion reactions of N,N'-diisopropylcarbodiimide into the M-N bonds of homologous hafnium amide complexes 1-3 and {[mu2-NC(NMe2)2][NC(NMe2)2]2HfCl}2 (4) using a salt metathesis reaction, are reported. Single-crystal X-ray diffraction analysis revealed that compounds 1-3 were monomers, while compound 4 was found to be a dimer. The observed fluxional behavior of compounds 1-3 was studied in detail using variable-temperature and two-dimensional NMR techniques. The thermal characteristics of compounds 1-3 seem promising for HfO2 thin films by vapor deposition techniques. Metal-organic chemical vapor deposition experiments with compound 2 as the precursor resulted in smooth, uniform, and stoichiometric HfO2 thin films at relatively low deposition temperatures. The basic properties of HfO2 thin films were characterized in some detail.

HfO2 thin films with thickness between 2 and 20nm were grown by liquid injection metallorganic chemical vapor deposition, LI-MOCVD, on SiOx∕Si(100) substrates. Different mononuclear precursors ([Hf(OPrnormali)2(tbaoac)2] , [Hf(NEt2)2(guanid)2] , and [Hf(OBunormalt)2(dmae)2] were tested in combination with different solvents. Growth rate, surface morphology, crystal structure, and crystal density of the as-deposited films were analyzed as a function of deposition temperature. The influence of postdeposition annealing on the densification and crystallization was studied. Correlation of the structural properties with the electrical properties of metal insulator semiconductor capacitors with Pt top electrodes is discussed. Fully silicided metal gate stacks are additionally discussed for selected samples.

A monomeric titanium complex suitable for liquid‐injection MOCVD applications is synthesized and its molecular structure is determined by single‐crystal X‐ray diffraction. [Ti(OiPr)2‐(tbaoac)2] (see Figure), (tbaoac) = tertiarybutylacetoacetonate), is a volatile alkoxide‐(beta)diketonate precursor that has a low melting point and very good solubility in common organic solvents.

We describe a convenient nonhydrolytic approach to the preparation of uniform, quantum confined TiO 2 nanocrystals using an intramolecularly adduct stabilised alkoxide precursor. In contrast to established aqueous sol-gel techniques the processing in hydrocarbon solvents at high temperatures allows access to very small free standing crystallites, and opens up new possibilities for control over size distribution, surface chemistry and particle agglomeration.