A novel contact resonance atomic force microscopy (CR-AFM) method utilizing a two-dimensional Kirchhoff-Love plate framework is presented. Theoretical formulations are discussed, and the classic CR-AFM problem is re-cast into an easily implementable generalized eigenvalue problem. An analysis is performed to determine the optimal placement of the sensing tip for plates of different aspect ratios. Finally, an experiment is conducted using the finite element method to numerically verify the proposed technique. By using a plate geometry for CR-AFM and optimizing the sensor tip location, we achieve a higher measurement sensitivity and modal density when compared with standard AFM cantilever geometries. A higher modal density allows CR-AFM measurement to be conducted using more information extracting eigenmodes in a given frequency bandwidth.
Numerous nanometrology techniques concerned with probing a wide range of frequency dependent properties would benefit from a cantilevered sensor with tunable natural frequencies. In this work, we propose a method to arbitrarily tune the stiffness and natural frequencies of a microplate sensor for atomic force microscope applications, thereby allowing resonance amplification at a broad range of frequencies. This method is predicated on the principle of curvature-based stiffening. A macroscale experiment is conducted to verify the feasibility of the method. Next, a microscale finite element analysis is conducted on a proof-of-concept device. We show that both the stiffness and various natural frequencies of the device can be highly controlled through applied transverse curvature. Dynamic phenomena encountered in the method, such as eigenvalue curve veering, are discussed and methods are presented to accommodate these phenomena. We believe that this study will facilitate the development of future curvature-based microscale sensors for atomic force microscopy applications.
In this study, we propose a novel plate-like sensor which utilizes curvature-based stiffening effects for enhanced nanometrology. In the proposed concept, the stiffness and natural frequencies of the sensor can be arbitrarily adjusted by applying a transverse curvature via piezoelectric actuators, thereby enabling resonance amplification over a broad range of frequencies. The concept is validated using a macroscale experiment. Then, a microscale finite element analysis is used to study the effect of applied curvature on the microplate static stiffness and natural frequencies. We show that imposed transverse curvature is an effective way to tune the in-situ static stiffness and natural frequencies of the plate sensor system. These findings will form the basis of future curvature-based stiffening microscale studies for novel scenarios in atomic force microscopy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.