No abstract

In this study an integrated methodology was proposed for the selection of solvent systems to produce electrospinnable solutions that form defect‐free poly(lactic acid) (PLA) fibers with narrow diameter distributions. The solvent systems were chosen using a thermodynamic approach, combined with electrical and rheological property criteria. More specifically, the three step methodology includes (1) initial choice of solvent by solubility evaluation to meet thermodynamic criteria, (2) electrical properties, that is, conductivity and dielectric constant adjustment by using solvent mixtures to meet electrical property criteria, and (3) critical entanglement concentration (Ce) determination by viscosity measurements, supported by elastic and plastic moduli measurements, followed by concentration adjustment to meet rheological criteria. All three criteria need to be met to ensure defect‐free nanofiber morphology. The methodology was demonstrated using PLA solutions that were characterized in terms of thermodynamic properties, conductivity, surface tension, and viscosity measurements. These data were analyzed and related to the nanofiber morphology and diameter as determined from scanning electron microscopy (SEM). Measurements of the elastic (G′) and the plastic (G″) moduli of PLA solutions showed a sharp increase of G′ at the chain entanglement concentration. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 1483–1498

In this study, nanofibre mats for chemical adsorption of heavy metals were prepared by electrospinning blends of hydrolyzed keratin (HK) and polyamide 6 (PA6) in formic acid. Viscosity measurements of the spinning solutions and morphological analyses of the fracture sections of the same polymer blends cast into films, suggested intermolecular interactions and good compatibility between HK and PA6. The mats made of continuous randomly oriented blend nanofilaments of HK/PA6 50/50 wt, with a mean diameter of about 200 nm, were tested as chromium (VI) ion adsorbents. The parameters investigated included initial chromium ion concentration, pH, contact time and adsorbent dosage. The maximum adsorption capacity occurred at acidic pH. The pseudo-first order, the pseudo-second order and the intraparticle diffusion models were used to describe the kinetics of adsorption process. It was found that kinetic data fit the pseudo-second order model and follow the intraparticle diffusion model, although diffusion is not the only rate control step. Adsorption data fit well the Freundlich isotherm model and the maximum adsorption capacity was found 55.9 mg/g. Moreover, the mean free energy (E) of adsorption ranges between 8 and 16 kJ/mol, so that the adsorption mechanism for HK-based nanofibres was explained as an ion-exchange process.