Efficient evolution of hydrogen through electrocatalysis at low overpotentials holds tremendous promise for clean energy. Hydrogen evolution can be easily achieved by electrolysis at large potentials that can be lowered with expensive platinum-based catalysts. Replacement of Pt with inexpensive, earth-abundant electrocatalysts would be significantly beneficial for clean and efficient hydrogen evolution. To this end, promising results have been reported using 2H (trigonal prismatic) XS₂ (where X  =  Mo or W) nanoparticles with a high concentration of metallic edges. The key challenges for XS₂ are increasing the number and catalytic activity of active sites. Here we report monolayered nanosheets of chemically exfoliated WS₂ as efficient catalysts for hydrogen evolution with very low overpotentials. Analyses indicate that the enhanced electrocatalytic activity of WS₂ is associated with the high concentration of the strained metallic 1T (octahedral) phase in the as-exfoliated nanosheets. Our results suggest that chemically exfoliated WS₂ nanosheets are interesting catalysts for hydrogen evolution.

We report chemically exfoliated MoS2 nanosheets with a very high concentration of metallic 1T phase using a solvent free intercalation method. After removing the excess of negative charges from the surface of the nanosheets, highly conducting 1T phase MoS2 nanosheets exhibit excellent catalytic activity toward the evolution of hydrogen with a notably low Tafel slope of 40 mV/dec. By partially oxidizing MoS2, we found that the activity of 2H MoS2 is significantly reduced after oxidation, consistent with edge oxidation. On the other hand, 1T MoS2 remains unaffected after oxidation, suggesting that edges of the nanosheets are not the main active sites. The importance of electrical conductivity of the two phases on the hydrogen evolution reaction activity has been further confirmed by using carbon nanotubes to increase the conductivity of 2H MoS2.

The applications of copper (Cu) and Cu-based nanoparticles, which are based on the earth-abundant and inexpensive copper metal, have generated a great deal of interest in recent years, especially in the field of catalysis. The possible modification of the chemical and physical properties of these nanoparticles using different synthetic strategies and conditions and/or via postsynthetic chemical treatments has been largely responsible for the rapid growth of interest in these nanomaterials and their applications in catalysis. In addition, the design and development of novel support and/or multimetallic systems (e.g., alloys, etc.) has also made significant contributions to the field. In this comprehensive review, we report different synthetic approaches to Cu and Cu-based nanoparticles (metallic copper, copper oxides, and hybrid copper nanostructures) and copper nanoparticles immobilized into or supported on various support materials (SiO2, magnetic support materials, etc.), along with their applications in catalysis. The synthesis part discusses numerous preparative protocols for Cu and Cu-based nanoparticles, whereas the application sections describe their utility as catalysts, including electrocatalysis, photocatalysis, and gas-phase catalysis. We believe this critical appraisal will provide necessary background information to further advance the applications of Cu-based nanostructured materials in catalysis.

Despite being technically possible, splitting water to generate hydrogen is still practically unfeasible due mainly to the lack of sustainable and efficient catalysts for the half reactions involved. Herein we report the synthesis of cobalt-embedded nitrogen-rich carbon nanotubes (NRCNTs) that 1) can efficiently electrocatalyze the hydrogen evolution reaction (HER) with activities close to that of Pt and 2) function well under acidic, neutral or basic media alike, allowing them to be coupled with the best available oxygen-evolving catalysts-which also play crucial roles in the overall water-splitting reaction. The materials are synthesized by a simple, easily scalable synthetic route involving thermal treatment of Co(2+) -embedded graphitic carbon nitride derived from inexpensive starting materials (dicyandiamide and CoCl2 ). The materials' efficient catalytic activity is mainly attributed to their nitrogen dopants and concomitant structural defects.

The oxygen reduction reaction (ORR)-one of the two half-reactions in fuel cells-is one of the bottlenecks that has prevented fuel cells from finding a wide range of applications today. This is because ORR is inherently a sluggish reaction; it is also because inexpensive and sustainable ORR electrocatalysts that are not only efficient but also are based on earth-abundant elements are hard to come by. Herein we report the synthesis of novel carbon-based materials that can contribute to solving these challenges associated with ORR. Mesoporous oxygen- and nitrogen-doped carbons were synthesized from in situ polymerized mesoporous silica-supported polyaniline (PANI) by carbonization of the latter, followed by etching away the mesoporous silica template from it. The synthetic method also allowed the immobilization of different metals such as Fe and Co easily into the system. While all the resulting materials showed outstanding electrocatalytic activity toward ORR, the metal-free, PANI-derived mesoporous carbon (dubbed PDMC), in particular, exhibited the highest activity, challenging conventional paradigms. This unprecedented activity by the metal-free PDMC toward ORR was attributed to the synergetic activities of nitrogen and oxygen (or hydroxyl) species that were implanted in it by PANI/mesoporous silica during pyrolysis.

Despite being technically possible, splitting water to generate hydrogen is still practically unfeasible due mainly to the lack of sustainable and efficient catalysts for the half reactions involved. Herein we report the synthesis of cobalt‐embedded nitrogen‐rich carbon nanotubes (NRCNTs) that 1) can efficiently electrocatalyze the hydrogen evolution reaction (HER) with activities close to that of Pt and 2) function well under acidic, neutral or basic media alike, allowing them to be coupled with the best available oxygen‐evolving catalysts—which also play crucial roles in the overall water‐splitting reaction. The materials are synthesized by a simple, easily scalable synthetic route involving thermal treatment of Co2+‐embedded graphitic carbon nitride derived from inexpensive starting materials (dicyandiamide and CoCl2). The materials’ efficient catalytic activity is mainly attributed to their nitrogen dopants and concomitant structural defects.

Background Elevated proinflammatory cytokines are associated with greater COVID-19 severity. We aimed to assess safety and efficacy of sarilumab, an interleukin-6 receptor inhibitor, in patients with severe (requiring supplemental oxygen by nasal cannula or face mask) or critical (requiring greater supplemental oxygen, mechanical ventilation, or extracorporeal support) COVID-19. Methods We did a 60-day, randomised, double-blind, placebo-controlled, multinational phase 3 trial at 45 hospitals in Argentina, Brazil, Canada, Chile, France, Germany, Israel, Italy, Japan, Russia, and Spain. We included adults (≥18 years) admitted to hospital with laboratory-confirmed SARS-CoV-2 infection and pneumonia, who required oxygen supplementation or intensive care. Patients were randomly assigned (2:2:1 with permuted blocks of five) to receive intravenous sarilumab 400 mg, sarilumab 200 mg, or placebo. Patients, care providers, outcome assessors, and investigators remained masked to assigned intervention throughout the course of the study. The primary endpoint was time to clinical improvement of two or more points (seven point scale ranging from 1 [death] to 7 [discharged from hospital]) in the modified intention-to-treat population. The key secondary endpoint was proportion of patients alive at day 29. Safety outcomes included adverse events and laboratory assessments. This study is registered with ClinicalTrials.gov , NCT04327388 ; EudraCT, 2020-001162-12; and WHO, U1111-1249-6021. Findings Between March 28 and July 3, 2020, of 431 patients who were screened, 420 patients were randomly assigned and 416 received placebo (n=84 [20%]), sarilumab 200 mg (n=159 [38%]), or sarilumab 400 mg (n=173 [42%]). At day 29, no significant differences were seen in median time to an improvement of two or more points between placebo (12·0 days [95% CI 9·0 to 15·0]) and sarilumab 200 mg (10·0 days [9·0 to 12·0]; hazard ratio [HR] 1·03 [95% CI 0·75 to 1·40]; log-rank p=0·96) or sarilumab 400 mg (10·0 days [9·0 to 13·0]; HR 1·14 [95% CI 0·84 to 1·54]; log-rank p=0·34), or in proportions of patients alive (77 [92%] of 84 patients in the placebo group; 143 [90%] of 159 patients in the sarilumab 200 mg group; difference −1·7 [−9·3 to 5·8]; p=0·63 vs placebo; and 159 [92%] of 173 patients in the sarilumab 400 mg group; difference 0·2 [−6·9 to 7·4]; p=0·85 vs placebo). At day 29, there were numerical, non-significant survival differences between sarilumab 400 mg (88%) and placebo (79%; difference +8·9% [95% CI −7·7 to 25·5]; p=0·25) for patients who had critical disease. No unexpected safety signals were seen. The rates of treatment-emergent adverse events were 65% (55 of 84) in the placebo group, 65% (103 of 159) in the sarilumab 200 mg group, and 70% (121 of 173) in the sarilumab 400 mg group, and of those leading to death 11% (nine of 84) were in the placebo group, 1...

Recebido em 19/1/09; aceito em 25/3/09; publicado na web em 2/4/09 APPLICATIONS OF LIGNOCELLULOSIC FIBERS IN POLYMER CHEMISTRY AND IN COMPOSITES. The use of lignocellulosic fibers and their constituents, as raw materials in the production of polymeric and composite materials, represent an exceptional opportunity of sustainable technological development. In the present report works that discuss promising alternatives of obtaining and use of materials such as cellulose, hemicellulose, lignin, cellulose nanocrystals and biocomposites were revised. The advance in the use of biomass can be, in a near future, capable of going beyond the application difficulties of these vast materials, especially in relation to the economical unviability, by the production of high performance polymeric and composite materials. This advance would represent a higher profitability to some areas of agrobusiness, especially the sector of biofuels, which produces elevated amounts of biomass waste.Keywords: lignocellulosic fibers; nanowhiskers; biocomposites. introduçÃoNos últimos anos tem surgido um grande interesse mundial no desenvolvimento de tecnologias "verdes" que possibilitem a utilização de produtos de menor impacto ambiental.1-4 A química "verde", como um todo, implica no desenvolvimento de processos químicos e produtos que levem a um ambiente mais limpo, saudável e sustentável. Neste contexto, os materiais plásticos sintéticos têm recebido especial atenção por conter em seus métodos de preparação questões que devem ser priorizadas. As questões que devem ser priorizadas são a não-biodegradabilidade dos plásticos sintéticos e por serem oriundos de fontes não-renováveis. 5-8Na busca pela sustentabilidade, várias pesquisas e trabalhos na área de materiais poliméricos e compósitos foram, e estão sendo, realizados para garantir a preservação ambiental e proporcionar um melhor padrão de vida à sociedade.9-13 Dentre as pesquisas nesta área, as que buscam a aplicação de recursos naturais na preparação dos materiais vêm crescendo, podendo-se destacar o uso de fibras naturais. [14][15][16][17][18][19][20][21][22] A Organização das Nações Unidas para a Agricultura e a Alimentação (FAO-ONU -Food and Agriculture Organization of the United Nations) declarou o ano de 2009 como o ano internacional das fibras naturais.23 A medida visa conscientizar e estimular a utilização de fibras naturais, encorajando políticas governamentais de incentivo ao setor e às ações empresariais sustentáveis, para a exploração dessas matérias-primas.Destaque ainda maior deve ser dado à utilização de fibras naturais de origem vegetal, em razão da enorme variedade de espécies passí-veis de serem pesquisadas. Diversas fibras vegetais são produzidas em praticamente todos os países e usualmente são designadas como materiais lignocelulósicos. Algumas fibras ocorrem espontaneamente na natureza, outras são cultivadas como atividade agrícola e ainda há aquelas que são resíduos gerados, principalmente, pela agroindústria. Na Tabela 1 pode ser verificada a produção anual das princ...